Polymorphism of Acrylic and Methacrylic Acid Esters Containing Long Fluorocarbon Chains and Their Polymerizability

The molecular aggregation of acrylic and methacrylic acid esters containing long-fluorocarbon chains: 2-(perfluoroalkyl)ethyl acrylate (FF_nEA) and 2-(perfluoroalkyl)ethyl methacrylate (FF_nEMA) (F(CF₂)_nCH₂CH₂OCOC(X)=CH₂, where X=H, CH₃ and n=6, 8, 10) was investigated by differential scanning calorimetry (DSC) and temperature controlled X-ray powder diffraction measurement. These compounds exhibited some characteristic polymorphic behaviors depending on the length of fluorocarbon chain and the -position methyl group. The solid-state polymerization by -ray irradiation was studied for these compounds in the various crystal forms. In the solid-state polymerization, highest polymerizability was observed in the crystal form that exists in the highest temperature region for each compound.This revised version was published online in November 2005 with corrections to the Cover Date.     

Molecular weight distribution of polyamides obtained in anionic polymerization of methyl-substituted β-lactams and aminolysis of their N-benzoyl lactams

The anionic ring-opening polymerization of 3-methyl-2-azetidinone ( 3 ) in a mixture of N,N-dimethylacetamide with lithium chloride proceeded quantitatively in a homogeneous phase at 25°C, as well as the living anionic polymerization of 3,3-dimethyl-, 4,4-dimethyl-2-azetidinone ( 1 and 2 respectively) in a similar condition. However, the molecular weight dispersion of the polyamide obtained from 3 was found to be higher than that obtained from 1 and 2. The aminolysis reaction of their N-benzoyllactams and N-acyllactams corresponding to their growing species with benzylamine was investigated kinetically, and one of the reasons for broadening of the molecular weight distribution of the polyamide obtained in the anionic polymerization of 3 was speculated to result from a low value of the ratio of the initiation reaction constant to the propagation one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1831–1838, 1997     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

Elucidation of high ring‐opening polymerizability of methylated 1,6‐anhydro glucose

1,6‐Anhydro glucose was extracted from a wood tar that is a by‐product of charcoal manufacture. After methylation of the 1,6‐anhydro glucose, the starting monomer, 1,6‐anhydro‐2,3,4‐tri‐O‐methyl‐β‐D ‐glucopyranose (LGTME), was obtained. We found that LGTME had high ring‐opening polymerizability and polymerized under mild conditions. With BF₃OEt₂ catalyst under ordinary pressure and N₂ atmosphere at 0 °C, LGTME gave high molecular weight of polymer with 1,6‐α stereoregularity in a high yield, even though benzylated 1,6‐anhydro glucose monomer (LGTBE) gave no polymers by the same polymerization conditions. The GPC profile showed two absorptions corresponding to = 272 × 10³ and = 390 × 10⁴ in the proportion of 4.5:1. Furthermore, under high vacuum condition at 0 °C, LGTME gave the corresponding polymer and the lower molecular weight increased to = 364 × 10³. To reveal the high polymerizability of LGTME, two‐step polymerization was performed. After the first stage of polymerization under ordinary pressure for 6 h at 0 °C, the second LGTME monomer was added to the polymerization mixture and then the polymerization was continued. It was found that the lower molecular weight of the resulting polymer increased to = 394 × 10³ and the yield was 78%. These results suggest that poly(LGTME) after the first‐stage polymerization has stable propagating end which has a restarting ability for the ring‐opening polymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1013–1022, 2009     

Synthesis and polymerization of 2,5-dimethylene-2,5-dihydrothieno[3,2-b]thiophene derivatives: The structure and reactivity of quinonoid monomers

Novel 2,5-dimethylene-2,5-dihydrothieno[3,2-b]thiophene derivatives such as 2,5-bis[di(ethylthio)methylene]-2,5-dihydrothieno[3,2-b]thiophene ( 4b ) and 2,5-bis[cyano(ethylthio)methylene]-2,5-dihydrothieno[3,2-b]thiophene ( 4c ) were successfully synthesized as isolable crystals. Polymerization behavior of 2,5-bis(dicyanomethylene)-2,5-dihydrothieno[3,2-b]thiophene ( 4a ), 4b , and 4c was investigated. 4a , 4b , and 4c are not homopolymerizable with any initiators and also not copolymerizable with vinyl monomers such as styrene (St), methyl methacrylate, and acryronitrile except for an alternating copolymerization of 4a with St. 4a , 4b , and 4c did not copolymerize with 7,8-bis(butoxycarbonyl)-7,8-dicyanoquinodimethane (BCQ) as a highly conjugated comonomer and instead only homopolymer of BCQ was obtained, indicating that they are much less reactive than BCQ. To obtain the relative reactivity among 1c , 2c , and 4c , the rate of addition reaction of 2,2′-azobis(isobutyronitrile) (AIBN) with 4c was compared with those of AIBN with 7,8-bis(ethylthio)-7,8-dicyanoquinodimethane ( 1c ) and with 2,5-bis[cyano(ethylthio)methylene]-2,5-dihydrothiophene ( 2c ) by NMR spectroscopy and analyzed with the first-order kinetics. The relative reactivity among 1c , 2c , and 4c was found to be as follows: 1c > 4c > 2c . The relationship between structure and reactivity for the quinonoid compounds was discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3027–3039, 1999     

Synthesis and polymerization of 7,7-bis(alkoxycarbonyl)-1,4-benzoquinone methides

7,7-Bis(methoxycarbonyl)-, 7,7-bis(ethoxycarbonyl)-, and 7,7-bis(isopropoxycarbonyl)-1,4-benzoquinone methides ( 4a, 4b , and 4c ) were successfully prepared as pure, isolable yellow-orange needles. The values of the first reduction potential for 4a, 4b , and 4c were measured in dichloromethane containing tetrabutylammonium perchlorate by cyclic voltammetry to be −0.54, −0.55, and −0.55 V, respectively, indicating that the alkyl groups do not significantly affect their electron-accepting properties. An anionic initiator butyllithium induced the homopolymerizations of 4a–c at 0°C, but a cationic initiator boron trifluoride etherate did not of 4a–c at 0°C. Compounds 4a and 4b homopolymerized with a radical initiator 2,2′-azobis(isobutyronitrile) (AIBN), but 4c did not, probably due to a larger steric hindrance effect of the isopropyl group compared with methyl and ethyl groups. Homopolymerizable compound 4a copolymerized with styrene in benzene in the presence of AIBN in a random fashion to give the monomer reactivity ratios r₁ ( 4a ) = 2.40 ± 0.40 and r₂ (styrene) = 0.01 ± 0.02 at 60°C and the Q and e values of 4a were 21.2 and +1.13, respectively, indicating that 4a is a highly conjugative and electron-accepting monomer, while the nonhomopolymerizable compound 4c copolymerized with styrene in a perfectly alternating fashion in benzene in the presence of AIBN at 60°C. No copolymerizations of 4a or 4c with 7,7,8,8-tetracyanoquinodimethane took place in dichloromethane in the presence of AIBN at 60°C. © 1996 John Wiley & Sons, Inc.     

Synthesis of aromatic polyethers by scholl reaction. VIII. On the polymerizability of 1,5-bis(phenoxy)pentanes and 1,5-bis(phenylthio)pentane

The synthesis and the oxidative polymerization of 1,5-bis(phenoxy)pentane, 1,5-bis(phenoxy)pentane substituted with various electron-donating groups, and 1,5-bis(phenylthio)pentane is described. The polymers derived from methyl substituted 1,5-bis(phenoxy)pentane monomers contain diphenyl methane, 1,2-diphenylethane, and benzyl chloride structural units. The mechanism for the generation of these structural units is presented. It consists of the proton transfer reactions from the cation-radical propagating species and subsequent reactions of the resulting benzyl radicals. The polymerizability of monomers with 1,5-pentanedioxy group is lower than that of the monomers with diphenyl sulfone group. This dissimilarity was attributed to the difference between both the reactivity and the concentration of the cation-radical propagating species resulted from these two classes of monomers.     

Anionic polymerization of o‐substituted styrene derivatives: Control of reactivity and stereochemistry by aminomethyl group

Ortho‐substituted styrenes, such as 2‐(N,N‐dimethylaminomethyl)styrene ( 1 ), 2‐(1‐pyrrolidinylmethyl)styrene ( 2 ), and 2‐[(S)‐2‐(1‐pyrrolidinylmethyl)‐1‐pyrrolidinylmethyl]styrene ( 3 ), were synthesized, and the effects of the ortho‐substituents on the polymerizability and stereoregularity of the obtained polymers using the anionic method were examined. The bulkiness and coordination of the ortho‐substituted amino groups to the counter cation significantly affected the polymerizability and stereochemistry of the obtained polymers. The anionic and radical polymerizations of 2 with a less hindered ortho‐substituent afforded polymers in good yields, whereas those of 1 and 3 resulted in lower yields. The anionic polymerization of 3 bearing an optically active diamine derivative at the ortho‐position with n‐butyllithium in toluene at 0 °C gave a polymer with a high stereoregularity and stable regular conformation based on the stereoregular backbone structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4088–4094, 2000     

Homopolymerization and copolymerization of isocyanatoethyl methacrylate

This article describes the homopolymerization of isocyanatoethyl methacrylate (IEM) and its copolymerization with methyl methacrylate (MMA) in acetonitrile in the presence of 2,2′‐azobisisobutyronitrile. The constant characteristic of IEM polymerizability (k_p²/k_te = 128 × 10^?3 L mol^?1 s^?1, where k_p is the propagation constant and k_te is the termination constant) was determined. The study of IEM reactivity toward MMA gave ratios of 0.88 and 1.20 for IEM and MMA, respectively. The physicochemical properties of the IEM homopolymer and IEM/MMA copolymers were also studied. The glass‐transition temperature of poly(isocyanatoethyl methacrylate) was found to be 47 °C. From the thermogravimetric analysis of the weight‐loss percentage corresponding to the first wave of the thermogram, it was shown that the degradation mechanism of the IEM/MMA copolymers started from the isocyanate group. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4762–4768, 2006