横向放大率法确定复合光学系统的基点

介绍了应用测量横向放大率确定两薄透镜组成的复合光学系统基点的方法。由于采用线阵光电耦合器件（CCD）测量物经光学系统成像的横向放大率，提高了测量精度。     

横向放大率法测定光具组的基点

介绍了用横向放大率法确定两薄透镜组成的光具组基点的原理和方法,该方法采用线阵光电耦合器件(CCD)测量物经光学系统成像的横向放大率,进一步提高了测量精度.     

Bi-large neutrino mixings by radiative magnification

Starting with the unification hypothesis of mixings of quarks and leptons and small quark-like mixings at the see-saw scale, we find that two large mixings for ν_e —νx03BC; andv _μ—v _τ at the weak scale are obtained as a result of renormalization group evolution and radiative magnification if the three neutrinos are quasi degenerate in masses and possess the same CP parity. We also find thatU _e3 remains small and well within the CHOOZ-Palo Verde bound since the correspondingV _ub for CKM mixing is very small. Several testable pedictions are pointed out.     

放大反应-氯化钠增敏光度法测定食品中的微量碘

样品中的有机碘高温灰化后,在酸性条件下,经饱和溴水将I^-氧化为IO3^-.在0．06％的磷酸酸度条件下,以KI还原KIO3,使样品中的碘放大六倍。系统优化选择了定波长、磷酸酸度、氯化钠质量浓度、淀粉用量、碘化钾用量等。在选定的最佳实验条件下,碘质量浓度在0～3．2μg／mL范围旱良好线性关系,相关系数为0．9995;方法榆出限为0．028μg／mL,回收率为96．27％～106．43％。     

弓张式超磁致伸缩材料换能器的设计与分析

为了提高超磁致伸缩换能器的作动行程,以获得足够大的发音强度,并使之满足发音装置体积小、装配零件少的要求,结合超磁致伸缩材料（GMM）的优良特性,提出一种基于三角放大原理的弓张式GMM换能器。该换能器以GMM棒作为驱动元件,通过固定弓张结构的一端,将双向输出转变为单向输出,同时利用柔性铰链结构,进一步增大换能器的位移输出。通过分析换能器的工作原理,计算得到其理论放大倍数为2.73,与所建立的有限元仿真模型计算得到的放大倍数2.8相近。制作了试验样机并搭建了相应的试验系统,得到在1 kHz范围内换能器最大输出位移为15.5 m,与仿真结果14.058 m相近。提出的弓张结构实现了换能器的位移放大,相应的分析方法也较好地反映了换能器的输出特性。     

风力机叶尖加小翼动力放大特性实验研究

本文在风力机的叶尖上通过添加V型平板小翼实验,提高了风力机的输出功率.在风洞实验研究中,进行了不同长度和宽度,不同前张角和后张角小翼的探索.实验表明小翼对风力机在一定尖速比λ范围内可以提高功率系数cp值.     

Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

高效耗能黏弹性阻尼框架结构减震性能研究

提出了高效耗能黏弹性阻尼器,研究了该阻尼器对框架结构的减震机理。首先给出了高效耗能黏弹性阻尼器的结构构造,推导了小震、大震与巨震作用下的阻尼放大系数计算公式,由此分析了该放大系数的变化规律。此外,还推导了设置高效耗能黏弹性阻尼框架结构的等效阻尼比。分析表明,框架结构设置高效耗能黏弹性阻尼器在阻尼等效前后顶部位移反应时程曲线相差不超过10%。     

体全息存储系统读出图像的放大率的补偿算法研究

在1∶1体全息存储系统的读出过程中,保证图像的不失真和降低误码率是最关键的问题。提出了一种新颖的放大率补偿算法,定量分析了放大率偏移误差对图像的影响,并通过理论推导和实验模拟证明了这一算法的可行性。     

CCD激光测距实验

CCD激光测距实验是集光、机、电为一体的综合性实验，学生可以用简单的几何光学知识、采用激光遥感方式实现距离的非接触精确测量．本文简述了实验原理，给出了计算机自动处理和显示的系统硬件和软件环境，以及系统的校准方法，最后介绍了模拟实验结果。