3D‐morphology reconstruction of nanoscale phase‐separation in polymer memory blends

In many organic electronic devices functionality is achieved by blending two or more materials, typically polymers or molecules, with distinctly different optical or electrical properties in a single film. The local scale morphology of such blends is vital for the device performance. Here, a simple approach to study the full 3D morphology of phase‐separated blends, taking advantage of the possibility to selectively dissolve the different components is introduced. This method is applied in combination with AFM to investigate a blend of a semiconducting and ferroelectric polymer typically used as active layer in organic ferroelectric resistive switches. It is found that the blend consists of a ferroelectric matrix with three types of embedded semiconductor domains and a thin wetting layer at the bottom electrode. Statistical analysis of the obtained images excludes the presence of a fourth type of domains. The criteria for the applicability of the presented technique are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1231–1237     

Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging

 Nuclear Magnetic Resonance (NMR) was used to investigate the extrusion behaviour of PTFE pastes in a ram extruder. By means of ¹H-NMR imaging (MRI) it is possible to determine the local proton density and therefore, the local fluid concentration. The ¹⁹F-MRI provides the local solid concentration. Thus the local saturation and the local porosity can be calculated with the information of the local fluid and solid concentration. Furthermore displacement profiles can be derived from NMR images by means of correlation techniques without any preparation or marking of the pastes. Received: 8 May 2000   Accepted: 1 May 2001     

Theory of interfacial phase transitions in surfactant systems

The spin-1 Ising model, which is equivalent to the three-component lattice gas model, is used to study wetting transitions in three-component surfactant systems consisting of an oil, water, and a nonionic surfactant. Phase equilibria, interfacial profiles, and interfacial tensions for three-phase equilibrium are determined in mean field approximation, for a wide range of temperature and interaction parameters. Surfactant interaction parameters are found to strongly influence interfacial tensions, reducing them in some cases to ultralow values. Interfacial tensions are used to determine whether the middle phase, rich in surfactant, wets or does not wet the interface between the oil-rich and water-rich phases. By varying temperature and interaction parameters, a wetting transition is located and found to be of the first order. Comparison is made with recent experimental results on wetting transitions in ternary surfactant systems.This paper is dedicated to J. K. Percus in honor of his 65th birthday.     

Application of stochastic optimal control to the suboptimal design of thrust-mass profiles

Stochastic optimal control techniques are applied to compare the performance of identical medium-range air-to-air missiles which have different thrust-mass profiles. The measure of the performance is the probability of reaching a lock-on-point with a favorable range of guidance and flight parameters, during a fixed time interval [0,t _f ], given that, during the flight, the trajectories of the missile are subjected to a variety of constraints including dynamic pressure constraints.     

Corner spontaneous magnetization

Details are given of a new method allowing an exact calculation of the spontaneous magnetization in the corner as well as along the edge at an arbitrary distance of the corner for a rectangular planar Ising ferromagnet.     

Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.     

Kinetics of the Formation of Goethite in the Presence of Sulfates and Chlorides of Monovalent Cations

The synthesis of goethite by oxidation of Fe²⁺in presence of metallic iron was undertaken in an aqueous medium containing indifferent salts such as Na₂SO₄, (NH₄)₂SO₄, NaCl, and NH₄Cl. Temperature and bubbling air rate were maintained, respectively, at 70°C and 1 L/min. The influence of anions and cations on the kinetics of each step of the process has been followed distinctly, the iron dissolution rate has been determined by the variation of the medium acidity, and the precipitation of goethite has been determined by gravimetric measurements. With respect to Cl⁻, the SO₄²⁻anion decreases the rate of the two reactions. NH₄⁺acts as an inhibitor when it is present at low concentrations and as an accelerator for higher concentrations; the limit corresponding to the change of NH₄⁺behavior depends on the nature of the counter ion. The reaction product is composed of pure goethite in the presence of sulfate salts, whereas a mixture of goethite and lepidocrocite, respectively, 60–70 and 40–30%, was observed in the presence of chloride salts.     

钠硼解石——水体系溶解和相平衡的研究(英)

Ulexite dissolution in water has been studied in the wide temperature range from 10℃ to 93℃ and two higher temperatures at 120 ℃ and 240 ℃. The analytical results showed that ulexite dissolved congruently from 10 ℃ to 35 ℃ and incongruently from 40 to 68 ℃. The solid component of ulexite, NaCaB₅O₆(OH)₆·5H₂O was dehydrated to form NaCaB₅O₆(OH)₆·H₂O from 50 to 68 ℃ and finally amorphous solid at 68 ℃. This amorphous solid converted into priceite at 71 ℃ and then converted completely to priceite at the boiling point(93℃) of the solution. At both 120 and 240 ℃, the dissolution of ulexite was an incongruent process. Above 120 ℃, ulexite became amorphous solid and then transformed into priceite. In addition to the solid to solid transformation, crystallization of priceite from the solution has also been observed. Based on our experimental results, mechanisms of dissolution, transformation, and crystallization of borate in ulexite-water system are discussed.     

Heats of solution of gaseous hydrocarbons in water at 25°C

The heats of solution at 25°C for a number of hydrocarbon gases are reported as measured by a calorimetric method. There is excellent agreement between the standard enthalpy changes of solution measured calorimetrically and those derived from high precision temperature dependent solubility measurements. However the calorimetrically determined standard enthalpies of solution of a number of gases are greatly improved over values obtained from low precision temperature dependent solubility measurements. A method is presented to readily estimate the standard errors in the standard enthalpy change for any process derived from the temperature dependence of the equilibrium constant for the process. Comparison of the standard enthalpies and entropies of solution of hydrocarbon gases in water shows that the standard free energies of solution for all hydrocarbon gases investigated are dominated by unfavorable entropy contributions. A strong linear correlation between the standard entropy of solution and the number of hydrogens in the hydrocarbon molecule is found. This correlation suggests that the hydrocarbon hydrophobic effect is regulated by the number of allowable configurations of a water molecule in contact with each C–H group.