拉伸温度对α’-型聚乳酸结构与性能的影响

α’-晶型聚乳酸(PLA)膜被制备和单轴拉伸.通过凝胶渗透色谱仪(GPC)、全反射红外光谱(ATR-IR)、差示扫描量热仪(DSC),X射线衍射(XRD)及Raman光谱等测试技术研究了拉伸温度梯度变化对α’-晶型PLA膜的分子量及其分布、分子链构象、结晶度、晶型转变和取向行为的影响.在恒定拉伸速度与应变下,拉伸温度对PLA膜的应力-应变曲线,特别是屈服强度、拉伸模量产生了较大的影响,其值随拉伸温度的增加而降低.GPC测试结果表明,在不同的温度下拉伸后,PLA会发生一定程度的降解,分子量降低;ATR-IR,XRD,DSC和Raman光谱测试结果表明,在不同的温度下拉伸后α’-型PLA没有发生晶型的转变,即没有由α’-晶体转变为α-或β-晶体.结果表明PLA的结晶度、分子链取向程度强烈依赖于拉伸温度:当拉伸温度低于100℃时,α’-型PLA膜的结晶度与沿着拉伸方向的变形程度随拉伸温度的增加而增加,分子链的高度取向诱导了PLA结晶;当拉伸温度超过100℃后,PLA的分子链沿着拉伸方向上的有序度与结晶度将降低.     

Least squares estimators of the regression function with twice censored data

We propose least squares estimators of E(Y/X=x) for Y censored on the right by R and min(Y,R) left censored. We establish their convergence in the L₂-norm. This work extends a known result in the context of right censoring.     

光纤系统在手绘图形面积检测中的应用研究

本文介绍了一种实时记录手绘图形边界轨迹和确定其包围面积的ＣＣＤ检测系统。该系统采用光纤探头为光笔，手持光笔描绘边界对比较差的图形，以面阵ＣＣＤ作为探测器件，实时记录下光笔描绘的轨迹。设计出恰当的计算方法，在图形边界轨迹描绘的同时，计算出图形面积。整个测试过程具有速度快、自动化程度高等特点。光笔和定位精度可达到１０μｍ的量级。将此系统应用于汽车前窗冰层融化速度的检测，具有明显的实用价值。     

FI-KR-FAAS空气混合吸附二次气体分隔洗脱法测定海洋生物样中的痕量铅

建立了流动注射（flow injection, FI）空气混合吸附预富集编结反应器（knotted reactor, KR）二次气体分隔洗脱法与火焰原子吸收光谱法（flame atomic absorption spectrum, FAAS）联用测定海洋生物样中的痕量铅。在预富集步骤,空气、络合剂和铅溶液在线混合,空气的引入,大大提高了铅的螯合物在KR内壁的吸附效果。在洗脱前,通入一段空气流,在洗脱过程中,即在非完全洗脱时,加入一段空气流,两段空气流的引入,大大降低了被分析物在洗脱液中的分散,提高了信号响应值,从而提高了浓集系数（enhancement factor, EF）。将空气混合吸附预富集与二次气体分隔洗脱法联用,使得KR吸附富集效果和洗脱效果达到了更高的水平。和微柱的低寿命、高反压相比,KR反压小,耐酸耐碱,寿命几乎无限长,对蠕动泵的要求很低,不易造成溶液渗漏等问题。在洗脱过程进行到第5秒时输入1 s空气流作为间隔,而不是等整个洗脱过程完成以后再输入空气流,此方法的优点是：洗脱完全,而且大大降低了被分析物在洗脱过程中的分散,吸收信号值大大增加。如果单纯地把洗脱时间降到5 s,那么洗脱会非常不完全,也就是没有洗脱干净,在管路中还会残存大量的被分析物,残存的被分析物被带入下一个样品分析中,会对整个实验造成很大的误差,所有的实验数据都将不准,失去数据利用价值。所以完全的洗脱是非常必要的,必须保证一定的洗脱时间。由于随着洗脱过程的进行,洗脱下来的被分析物呈逐渐减小的趋势,在以往洗脱方法中,等到整个洗脱过程全部进行完以后,被分析物在洗脱液中的分散已经相当严重了,导致所得到吸收信号值大大减小。在洗脱过程中插入空气流,即在非完全洗脱时插入空气流,降低了被分析物在洗脱过程中的分散,同时保证了洗脱的完全,大大提高了吸收信号峰值。优化了络合剂种类、浓度和酸度,样品富集时间和流速,空气混合吸附时的空气流速和时间,洗脱前第一次通气时间,预洗脱时间,洗脱过程中第二次通气时间等实验参数。在最佳实验条件下,铅在0.005～0.6 mg·L-1浓度范围内呈现良好的线性关系,铅的检出限（3σ）为2.2 μg·L-1。将新方法与直接火焰原子吸收法、传统的FI-KR空气混合吸附预富集普通洗脱法进行了比较,结果显示本方法的浓集系数更高。将该方法应用于海洋生物样中痕量铅的测定,测得鳝鱼、对虾、虾姑、鲟鱼、舌鳎和贻贝标准中的铅含量为0.34~1.92 μg·g-1;加标量为1.0 μg·g-1时,加标回收率为93.5%~96.4%;相对标准偏差为0.52%~2.94%。用FI-KR-FAAS空气混合吸附预富集,二次气体分隔洗脱法测定海洋生物样中的痕量铅,具有富集效果好,准确度高,精密度好,浓集系数高等优点,分析结果令人满意。     

Pencil‐Drawn Dual Electrode Detectors to Discriminate Between Analytes Comigrating on Paper‐Based Fluidic Devices but Undergoing Electrochemical Processes with Different Reversibility

A simple method is described to discriminate between analytes comigrating under on‐plate separation conditions, whose electrochemical behavior displays different reversible characters. It is based on the use of dual electrode detectors pencil‐drawn at the end of paper‐based fluidic channels defined by hydrophobic barriers. Simultaneous detection of comigrating species is achieved by applying to the upstream pencil‐drawn working electrode a potential for the oxidation (or reduction) of both analytes, while to the downstream pencil‐drawn working electrode a potential is imposed for the reverse process involving the product of the sole analyte undergoing a reversible enough electrochemical process. The performance of these inexpensive devices was preliminarily optimized by adopting hexacyanoferrate(II) as prototype species undergoing a reversible anodic process at carbon electrodes. They were then used as dual electrode detectors for thin‐layer chromatographic runs conducted on paper‐based microfluidic devices. Two types of synthetic solutions, one containing different contents of dopamine (DA) and ascorbic acid (AA) and the other of paracetamol (PA) and AA, were chosen as model samples. This choice was prompted us by the fact that in both cases these analytes comigrated under the adopted experimental conditions and required similar enough oxidation potentials. Nevertheless, DA and PA underwent reversible enough anodic processes while an irreversible electrochemical reaction is involved in the AA oxidation. Satisfactory results were found for both couples of target analytes, whose simultaneous detection was achieved within 230 s and was characterized by good enough repeatability and sensitivity. In particular, this approach appears to be well suited for the rapid and inexpensive assembling of electrochemical detectors for flow analysis systems.     

具有二次像面的三反射光学系统的研究

论述了一种具有二次像面的偏视场三反射光学系统的设计方法,定性地讨论了设计参量β1,Δ,f’1对系统传递函数的影响给出两种结构型式,两个设计结果,并从系统成像质量的好坏、加工的难易程度及结构的可实现性分析了两种结构型式的优缺点.     

Rapid Prototyping of Sensors and Conductive Elements by Day‐to‐Day Writing Tools and Emerging Manufacturing Technologies

The growing demand for low cost and easy to use analytical devices requires the development of reliable and rapid deposition strategies suitable for changing easily planned designs and applicable to a wide range of materials for assembling conductive tracks and sensitive elements. Further important challenges to be pursued are the possibility of using readily available instrumentation and reducing power consumption and hazardous chemical waste. This review provides an overview of the use of portable day‐to‐day writing tools, such as pencils and pens, for the rapid and on‐demand deposition of conductive patterns on different substrates, with particular emphasis on the assembly of “Do It Yourself” sensors. Moreover, layer‐by‐layer deposition of simple or even complex three dimensional (3D) circuits, resorting to pressure driven extrusion of conductive filaments is considered. Future perspectives and potentiality of these emerging technologies for assembling sensors are also explored.     

Structure and formation mechanism of melt‐drawn highly oriented polymer fibers

Well‐separated and parallel aligned fibers of various polymers have been prepared by a simple but effective melt‐drawing procedure, and their structural features have been studied with field‐emission scanning electron microscopy. The results show that the resulting polymer fibers, with diameters ranging from tens of nanometers to hundreds of nanometers, consist of highly oriented lamellar or fibrillar crystals with the molecular chains aligned in the drawing direction. Scanning electron microscopy images of the drawing process indicate that drawing a thin polymer molten layer at temperature far above its melting point leads to the formation of elongated microcracks. The microcracks embedded in the polymer thin film propagate along the drawing direction and result in the formation of polymer microfibers, which split continuously under high instantaneous stresses and produce well‐separated polymer fibers with diameters on the nanometer scale. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2703–2709, 2004     

Melting behavior of drawn polypropylene

The melting behavior of drawn, compression-molded isotactic polypropylene has been ex-amined in terms of the infuence of drawing conditions on the observed properties. Two endothermic peaks were observed on differential scanning calorimetry (DSC) for samples when high draw ratios and high heating rates were used during DSC tests. The peak at lower temperature is influenced by draw ratio, temperature, and rate, and exhibits a strong superheating effect. The species associated with this peak can partially recrystallize into another species associated with the peak at higher temprature during DSC measurements. The position of the peak at higher temperature depends only on draw ratio. It is proposed that the doubel-melting peaks at lower and higher temperature result from extremely thin quasi-amorphous or crystalline layers between microfibrils and the lamellar crystals within microfibrils, repectively. © 1993 John Wiley & Sons, Inc.     

The effect of drawing on the transport of gases through polyethylene

A study has been made of the gas transport properties of polyethylene films of two different grades, Hizex 7000F and Rigidex 002-55, one-way drawn at 115°C to draw ratios in the range 1–20. Measurements of the permeability and diffusion coefficients of helium, oxygen, carbon dioxide and nitrogen have been made with a dynamic flow rate technique, utilizing a mass spectrometer detection system, and of oxygen using a commercial OXTRAN system. The samples were characterized by the measurement of density, birefringence and modulus and by wide-angle x-ray diffraction and differential scanning calorimetry. There is a large decrease in both the permeability and diffusion coefficients for all gases with increasing polymer draw ratio, with up to an 80-fold decrease in permeability for the larger permeants compared with the 10-fold decrease observed for helium. The solubilities of all the gases decrease only by a factor of ～ 2. The diffusion results are discussed in terms of geometric impedance and chain immobilization factors. The solubilities, on the other hand, appear to relate primarily to the amorphous volume fraction of the polymer. © 1993 John Wiley & Sons, Inc.