Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Toughening of epoxies via craze-like damage

The fracture behavior of a core-shell rubber (CSR) modified epoxy is investigated using both fracture mechanics and microscopy tools. The CSR-modified epoxy is found to be toughened via numerous line-array cavitations of the CSR particles, followed by plastic flow of the epoxy matrix. The toughening effect via the above craze-like damage process is found to be as effective as that of the well-known widespread rubber cavitation/matrix shear yielding mechanisms. The conditions for triggering the craze-like damage appear to be both stress state and rubber concentration dependent. The type of rubber tougheners utilized also plays a critical role in triggering this rather unusual craze-like damage in epoxy systems. © 1993 John Wiley & Sons, Inc.     

Charge plate technique in recoil study: Evidence for collection of recoil charged species from solid targets on metal electrodes

The occurrence of charge on recoil⁵⁶Mn produced by the (n,γ) reaction in polycrystalline potassium permanganate has been examined using the ‘charge plate technique’. From considerations of capture gamma ray decay schemes and internal conversion it appears that, in a condensed medium, the recoil atom develops charge after losing much of its initial kinetic energy which allows collection on charged electrodes. Preliminary findings were presented at the International Symposium on Radiochemistry and Radiation Chemistry, RC-41 BARC, Bombay, Feb. 4–6 (1991).     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

压缩X因子导数光谱法测定痕量锗

本采用压缩Ｘ因子导数光谱技术实现了宽峰体系灵敏度的大幅度提高，提出了测定痕量锗的方法。在０．７２ｍｏｌ／ＬＨ２ＳＯ４和３．０ｍｏｌ／ＬＨ３ＰＯ４的混酸介质中，锗－水杨基荧光酮－ＯＰ三元显色体系的压缩Ｘ因子四阶导数光谱摩尔响应系数达１．８９×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，灵敏度比常规光度法高１２．４倍；最低检测出限为０．０００３３ｍｇ／Ｌ，比常规光谱法低４倍；选择性也进一步提高，绝大多数离     

6σ管理和统计技术

从6σ名称,绿带、黑带的评定标准和培训内容都体现了统计技术是6σ管理的核心技术。DMAIC统计技术应用模式虽有不足,最大功绩是使应用统计技术简单化,实际应用者认识了统计技术的重要性。     

The DI-SPME Method for Determination of Selected Narcotics and Their Metabolites,and Application to Bone Marrow and Whole Blood Analysis

The present investigation utilised the quick and easy SPME/LC-MS method to determine selected narcotic substances and their metabolites in whole blood. The study included qualitative analysis and validation of the method. Analytes were determined in the linearity range of 25–300 ng/mL. The precision during and between days (in general CV < 13.41%), and the LOD which results in between 0.36 and 11.08 ng/mL, and the LOQ between 1.20 and 36.90 ng/mL were investigated. The validation results obtained, as well as the results of subsequent in-laboratory tests, confirmed the applicability of the method in the analysis of blood samples. An attempt to apply the method to the analysis of bone marrow samples has yielded promising results; however, more detailed studies are needed in this area.     

扫描环形光斑激光束优化研究

激光束的形状和能量分布限定了激光的应用范围,为满足不同的激光加工需要,必须对激光束进行变换。针对实验室用CO2激光器在热处理方面的应用,提出了激光扫描环形光斑光束优化法。基于温度场叠加原理建立了扫描环形光斑温度场的数学模型,模拟其温度场,可得到其温度分布特性;通过实验研究,分析了聚焦光斑与扫描环形光斑在激光淬火中对材料的热作用效果。结果表明,扫描环形光斑能改善激光热处理硬化层分布。理论和实验研究表明,激光扫描环形光斑技术可以实现激光热处理光束的优化,有一定的应用前景。