Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

基于超分子结构共掺杂纳米复合薄膜的制备与荧光特性

为改善功能分了的特性,提出一种基于金属纳米粒子-偶氮染料复合物共掺杂超分子结构功能材料的设计新方法.并依照此方法制备出复合材料,观测了其显微结构,测量了其紫外-可见光吸收,研究了该超分子结构复合体系的荧光特性.实验发现,由于金属银纳米粒子的掺杂,使得超分子结构复合体系中功能分子甲基橙在溶液态体系的荧光强度增强近5倍,而在两种不同结构(共混结构和包覆结构)的薄膜态超分子结构体系中,其荧光强度分别被猝灭15%和20%.研究结果表明,复合膜中采用超分子结构完全能够改善功能分子的特性.     

A model for thermal degradation of hybrid nanocomposites

A model is developed for thermal degradation of polymer nanocomposites. A composite is thought of as an equivalent network of linear chains with attached side-groups. Thermal degradation is treated as combination of (i) binary scission (fragmentation) of backbone chains, and (ii) detachment of side-groups and their subsequent annihilation (diffusion to the surface of a sample and desorption). An explicit solution is derived for the kinetic equation. This solution involves three adjustable parameters that are found by fitting observations on isotactic polypropylene reinforced with carbon nanofibres. Good agreement is demonstrated between the experimental data and the results of numerical simulation.     

Nanoscale highly filled epoxy nanocomposite

A new technique has been developed to prepare a highly filled epoxy-montmorillonite (MMT) nanocomposite using an organically modified MMT. Composites with clay content up to 70 wt.% exhibit unusual transparency, which is related to the spatial distribution of the mineral nanodomains. Dispersion of the layered silicate within the crosslinked epoxy matrix was verified using X-ray diffraction pattern, revealing layer spacings of 30 and 70 Å. Examination of these materials by scanning electron microscopy and transmission electron microscopy showed that intercalates have wholly layered morphology at all scales, oriented parallel to the surface of the specimen and have good wetting to the silicate surface by the epoxy matrix. Silicate lamellae intercalated with epoxy resin assembled into a cluster of about 50-120 nm thickness. These clusters assembled into superclusters with an average thickness of 300 nm. Studies by the Vickers hardness test of an epoxy-MMT nanocomposite containing 60 wt.% MMT indicated that the diamond pyramid hardness was 10-29 kg/mm².     

Enhanced electrical conductivity in chemically modified carbon nanotube/methylvinyl silicone rubber nanocomposite

Chemically modified multiwalled carbon nanotubes/methlyvinyl silicone rubber (m-MWNT/VMQ) nanocomposites with relatively good dispersion of nanotubes were prepared by treating the surface of MWNT using γ-aminopropyltriethoxy silane (KH550). Significant enhanced electrical conductivity was discovered in the m-MWNT/VMQ nanocomposites. The results could be attributed a strong interaction between m-MWNT and VMQ which was from the chemically modification of the surface for MWNT. The electrical property was also discussed in order to understand the percolation and electrical transport mechanism. The m-MWNT/VMQ nanocomposites with high conductivity in this study are promising application as one of novel functional materials.     

Analytical characterization of bioactive fluoropolymer ultra-thin coatings modified by copper nanoparticles

Copper–fluoropolymer (Cu-CFx) nano-composite films are deposited by dual ion-beam sputtering. The extensive analytical characterization of these layers reveals that inorganic nanoparticles composed of Cu(II) species are evenly dispersed in a branched fluoropolymer matrix. In particular, X-ray photoelectron spectroscopy has been employed to study the surface chemical composition of the material and to assess how it changes on increasing the copper loading in the composite. Transmission electron microscopy reveals that the copper nanoclusters have a mean diameter of 2–3 nm and are homogeneously in-plane distributed in the composite films. Electrothermal atomic absorption spectroscopy has been used to study the kinetics of copper release in the solutions employed for the biological tests. The Cu-CFx layers are employed as bioactive coatings capable of inhibiting the growth of target microorganisms such as Saccharomyces cerevisiae, Escherichia coli, Staphylococcus aureus, and Lysteria. The results of the analytical characterization enable a strict correlation to be established among the chemical composition of the material surface, the concentration of copper dissolved in the microorganisms broths, and the bioactivity of the nano-structured layer.     

Structure and mechanical properties of poly(l-lactide)/layered silicate nanocomposites

Poly(ε-caprolactone) (PCL) masterbatches with the intercalated and the exfoliated morphology were prepared by ring opening polymerization of ε-caprolactone in the presence of organomodified montmorillonite (MMT) Cloisite 30B. Poly(l-lactide) (PLLA) nanocomposites with Cloisite 30B or PCL masterbatches were prepared by melt blending. The effects of the silicate type, MMT content and the nanocomposite morphology on thermal and mechanical properties of PLLA nanocomposites were examined. The montmorillonite particles in PLLA/Cloisite 30B and PLLA/intercalated masterbatch nanocomposites were intercalated. In contrary to expectations, the exfoliated silicate layers of exfoliated masterbatch were not transferred into the PLLA matrix. Due to a low miscibility of PCL and PLLA, MMT remained in the phase-separated masterbatch domains. The stress-strain characteristics of PLLA nanocomposites, Young modulus E, yield stress σ_y and yield strain ε_y, decreased with increasing MMT concentration, which is associated with the increase in PCL content. The expected stiffening effect of MMT was low due to a low aspect ratio of its particles and was obscured by both plastifying effects of PCL and low PLLA crystallinity. Interestingly, in contrast to the neat PLLA, ductility was enhanced in all PLLA/Cloisite 30B materials and in PLLA/masterbatch nanocomposites with low MMT concentrations.     

草莓型SiO2/PMMA纳米复合微球的制备

在纳米二氧化硅水分散体系中,借助于碱性辅助单体1-乙烯基咪唑(1-VID)与未改性纳米二氧化硅表面羟基之间的酸-碱作用,通过1-VID与甲基丙烯酸甲酯(MMA)的自由基共聚合,制备了草莓型的SiO2/PMMA复合微球.整个反应过程中,纳米二氧化硅无需表面处理,体系中无需另外加入乳化剂或助乳化剂,微球表面吸附的纳米二氧化硅对颗粒起稳定作用.用动态光散射粒度分布仪测得复合微球粒径在120-330nm之间,热重分析结果表明,复合微球中二氧化硅含量介于15%-20%之间.透射电镜和扫描电镜显示所得复合微球具有草莓型结构,二氧化硅富集在表面.     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method

Organic-inorganic hybrids were prepared using diglycidyl ether of bisphenol A (DGEBA) type epoxy and tetraethoxysilane via the sol-gel process. The DGEBA type epoxy was modified by a coupling agent to improve the compatibility of the organic and inorganic phases. The sol-gel technique was used successfully to incorporate silicon and phosphorus into the network of hybrids increasing flame retardance.Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids. In condensed siloxane species for TEOS, silicon atoms through mono-, di-, tri-, and tetra-substituted siloxane bonds are designated as Q¹, Q², Q³, Q⁴, respectively. For 3-isocyanatopropyltriethoxysilane and diethylphosphatoethyltriethoxysilane, mono-, di-, tri-, tetra-substituted siloxane bonds are designated as T¹, T², T³. Results revealed that Q⁴, Q³, T³ are the major environments forming a network structure. The morphology of the ceramer was examined by scanning electron microscopy and Si mapping. Particle sizes were below 100 nm. The hybrids were nanocomposites. The char yield of pure epoxy resin was 14.8 wt.% and that of modified epoxy nanocomposite was 31 wt.% at 800 °C. A higher char yield enhances the flame retardance. Values of limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively, indicating that modified epoxy nanocomposites possess better flame retardance than the pure epoxy resin.