1,3-手性转移反应的研究 (4R)-和(4S)-4-甲基(E)-2-辛烯醇的合成

以手性辛烯二醇双酯与甲基锂铜反应, 经1,3手性转移, 分别生成立体选择性高的(4R)和(4S)-4-甲基-辛烯醇酯。     

吲哚并喹嗪衍生物的立体选择性合成

用锂铝氢四还原卟啉得到卟啉醇,它与甲乙酮反应得相应的羟甲基氨基酮,在相转移条件下,它能被转化成光学纯吲哚并喹嗪衍生物.列出了环化机理的反应流程.     

二十面体对称性(I~h)分子的从头计算研究II. 铜原子簇Cu~13的电子结构

应用对称性约化计算方案, 完成了铜原子簇Cu~13(I~h)三种基组下的从头计算, 最大维数390。为了进行比较, 也进行了Cu~2、Cu~4、Cu~6及Cu~8的计算。经过优化, 获得基态及平衡几何、布居、结合能等数据, 表明Cu~13可能稳定存在。Cu~13中以d成分为主的分子轨道均已填满, 对化学键无实际贡献, 成键作用为s, p性质; 再者, d带与s带不相交叠, 无金属Cu能带的特征。无论平衡几何、布居及结合能数值均与采用的其组很有关系, 虽然定性趋势是一致的。     

用氟钽酸根指示电位滴定钽的新方法

A new potentiometric titration method for the determination of tantalum in sulfuric acid and hydrofluoric acid media is described. EMF's were monitored with a double-junction reference electrode and a flurortantalate ion selective indicator electrode made in this laboratory previously. Five titrants have been evaluated for the precipitation titration. CPC, BDTAC and TPA yield the highest precision and largest potentiometric breaks, then rank CETAB and Hyamine 1622 in turn. CPC is considered to be the most satisfactory owing to the most sharp end-point break yielded when 10^-^4M of Ta is titrated with it. The concentration of H2SO4 suitable for the titration is 0.18 to 1.8M and that of HF is 0.23 to 1.7M. The method is suitable for Ta content in the range of 0.5 to 150 mg with a coefficient of variation of 0.15% (9 results) for 20 mg of Ta. HCl, H3PO4, tartaric acid and (NH4)2C2O4 as wellas a large amount of Fe^3^+, Ni^2^+, Cr^3^+, WO2^-^4, Zr^4^+, La^3^+, Al^3^+, MoO2^-^4 and Nb^5^+ do not interfere, while ClO^-^4, H2O2 and BF^-^4 must be avoided. The method has been found to be very useful for the determination of Ta in steels and crystalline lithium tantalate. The results obtained are in good agreement with those of comparable methods. This method is very simple and provides a fast determination process.     

掺杂Y^3+的锂锰尖晶石的合成及其电化学性能研究

采用流变相反应法合成了掺杂稀土钇离子的锂锰尖晶石LiYxMn2-xO4，并对其 结构和电化学性能进行了初步研究。结果表明，当掺入的Y^3+的含量较低（x≤0. 02)时，得到的产物能保持完整的尖晶石结构，并表现出极佳的电化学性能。Y^3+ 的掺入使材料的循环稳定性能大幅度提高，而这种提高是源于Y^3+对尖晶石结构的 稳定作用。电极材料LiY0.02Mn1.98O4显示了最优的电化学性能，在0.2℃放电速率 下，其初始放电容量为118mA·h·g^-1，100次循环后仍能保持初始容量的98％。     

High performance nanocomposite polymer electrolytes

Solid lithium-conducting nanocomposite polymer electrolytes based on poly(oxyethylene) (POE) were prepared using high aspect ratio cellulosic whiskers and lithium imide salt, LiTFSI. The cellulosic whiskers were extracted from tunicate — a sea animal — and consisted of slender parallelepiped rods that have an average length around 1 μm and a width close to 15 nm. High performance nanocomposite electrolytes were obtained. The filler provided a high reinforcing effect, despite the favorable cellulose/POE interactions that were expected to decrease the possibility of inter-whisker connection and formation of a percolating cellulosic network, while a high level of ionic conductivity was retained with respect to unfilled polymer electrolytes. Cross-linking and plasticizing of the matrix as well as preparation of the composites from an organic medium were also investigated.     

Li~2SO~4-MgSO~4、LiSO~4-Li~4SiO~4体系的研究

本文用X射线衍射(高温、室温)和热分析(DTA、DSC、TGA)等方法测定了Li~2SO~4-MgSO~4和Li~2SO~4-Li~4SO~4体系相图,并研究了化合物的性能和晶体结构。Mg~4Li~2(SO~4)~5在840℃由包晶反应形成,它在105℃分解为Li~2SO~4为基的固溶体和MgSO~4.在105℃反应时,形成每摩尔的Mg~4Li~2(SO~4)~5吸热2.57kJ,反应激活能为173.5kJ/mol. Mg~4Li~2(SO~4)~5属正交晶系,在180℃的点阵常数α=8.577A,b=8.741A, c=11.918A, 可能的空间群为P222或Pmmm,Z=2。Li~8-2x(SiO~4)~2-x(SO~4)~x是在953℃由包晶反应形成的新相.随着温度的降低,相区扩大,在室湿x=0.96-0.58.该相属正交晶系,空间群为Pmmn,Z=2.晶体的点阵常数在x=0.8时有一定最大值,a=5.002A,b=6.173A, c=10.608A.Li~g-2x(SiO~4)~2-x(SO~4)~x在空气中能吸收7.6wt%的水蒸汽和其他气体,脱水温度高于350℃,水份的吸脱不改变晶体结构,与沸石分子筛具有相似性质,脱水激活能为171.5kJ/mol.熔化后的Li~2SO~4-MgSO~4和Li~2SO~4-Li~4SiO~4试样以10℃/min速率降温,分别形成亚稳态共晶体系。     

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

烯烃配位的过渡金属卡宾配合物的研究XVI:四氟苯并双环[2,2,2]辛三烯三羰基铁的新奇开环反应-新型螯合双烯丙基三羰基铁配合物的合成和结构

四氟苯并双环[2,2,2]辛三烯三羰基铁(C12H6F4)-Fe(CO)3(1)与芳基锂试剂ArLi(Ar=C6H5、o-, m-, p-CH3C6H4、p-CH3OC6H4、p-CiC6H4), 在低温下反应, 生成的酰羰基锂盐中间体用三乙基氧 -四氟硼酸盐(Et3OBF4)在水溶液中于0℃进行烷基化时, 双环烯烃配体开环, 生成组成为(C12H6F4)(CO)2FeC(OC2H5)Ar的螯合双烯丙基二羰基铁配合物(2-7), 配合物5的晶体属单斜晶系, 晶胞参数为;a=16.870(4), b=13.707(4), c=19.361(4)A, β=107.92(2)°.V=4259(1)A^3, Z=8, 空间群为C^62h-C2/c, 最后的偏离因子R=0.0409, Rw=0.0391。     

三元体系MCl-SbCl~3-HOAc (M=Li,Na; 25℃)的研究

测定了三元体系MCl-SbCl~3-HOAc(M=Li,Na;25℃)的溶度数据和饱和溶液的折光指数,并绘制了相应的溶度图及其折光指数曲线。M=Li时,体系的溶度曲线和折光指数曲线均由三支组成,分别与LiCl.0.5HOAc,LiCl,SbCl~3相对应。M=Na时,体系属于简单共饱型,无任何新相形成。研究结果表明,当M分别是Li,Na或K,NH~4,Rb,Cs时,体系的物理化学行为有着极为显著的不同,说明MCl-SbCl~3-HOAc(M=Li,Na,K,NH~4,Rb,Cs)体系可以作为区分碱金属系列阳离子性质差别的典型体系。