Direct fabrication of periodic patterns with hierarchical sub-wavelength structures on poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) thin films using femtosecond laser interference patterning

A simple optical interference method for the fabrication of simply periodic and periodic with a substructure on poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) using femtosecond laser interference patterns is demonstrated. The femtosecond laser pulse was split by a diffractive beam splitter and overlapped with two lenses. Homogeneous periodic arrays could be fabricated even using a single laser pulse. In addition, multipulse irradiation resulted in reproducible sub-wavelength ripples oriented perpendicularly to the laser polarization with spatial period from 170 to 220 nm (around one-fourth of the laser wavelength). In addition, the observed size of the spatial period was not affected by the number of incident laser pulses or accumulated energy density. Using high energy pulses it was possible to completely remove the PEDOT:PSS layer without inducing damage to the underneath substrate.     

Facile fabrication of a lotus-effect composite coating via wrapping silica with polyurethane

A lotus-effect coating was fabricated by wrapping micro-silica and nano-silica with polyurethane (PU) and subsequent spraying. The coating shows the similar self-cleaning property as lotus leaves: the contact angle is as large as 168° and the sliding angle is as low as 0.5°. Surface morphology of the coating was studied with scanning electron microscopy and atomic force microscopy. The composite coating shows the similar structure as lotus leaves.     

Effect of annealing temperature on structure, magnetic properties and optical characteristics in Zn0.97Cr0.03O nanoparticles

The Cr-doped zinc oxide (Zn_0.97Cr_0.03O) nanoparticles were successfully synthesized by sol-gel method. The relationship between the annealing temperature (400 °C, 450 °C, 500 °C and 600 °C) and the structure, magnetic properties and the optical characteristics of the produced samples was studied. The results indicate that Cr (Cr³⁺) ions at least partially substitute Zn (Zn²⁺) ions successfully. Energy dispersive spectroscopy (EDS) measurement showed the existence of Cr ion in the Cr-doped ZnO. The samples sintered in air under the temperature of 450 °C had single wurtzite ZnO structure with prominent ferromagnetism at room temperature, while in samples sintered in air at 500 °C, a second phase-ZnCr₂O₄ was observed and the samples were not saturated in the field of 10000 Oe. This indicated that they were mixtures of ferromagnetic materials and paramagnetic materials. Compared with the results of the photoluminescence (PL) spectra, it was reasonably concluded that the ferromagnetism observed in the studied samples was originated from the doping of Cr in the lattice of ZnO crystallites.     

Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor

One-dimensional nanostructured manganese dioxide/polypyrrole (MnO₂/PPy) composite was prepared by in situ chemical oxidation polymerization of pyrrole in the host of inorganic matrix of MnO₂, using complex of methyl orange (MO)/FeCl₃ as a reactive self-degraded soft-template. The morphology and structure of the composite were characterized by infrared spectroscopy (IR) X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the MnO₂/PPy composite consists of α-MnO₂ and PPy with nanotube-like structure. Electrochemical properties of the composite demonstrated the material showed good electrochemical reversibility after 500 charge-discharge cycles in the potential range of −0.4 to 0.6 V, the tube-like nanocomposite has the potential application in electrochemical capacitor.     

Surface characterization and growth mechanism of laminated Ti3SiC2 crystals fabricated by hot isostatic pressing

Laminated Ti₃SiC₂ crystals were prepared by hot isostatic pressing from Ti, Si, C and Al powders with NaCl additive in argon at 1350 °C. The morphology and microstructure of Ti₃SiC₂ crystals were investigated by means of XRD, SEM, and TEM. The high symmetry and crystalline was revealed by high resolution transmission electronic microscope (HRTEM) and selected area electron diffraction (SAED). The growth mechanism of Ti₃SiC₂ crystals controlled by two-dimensional nucleation was put forward. The growth pattern of layered steps implies that the growth of the (0 0 2) face should undergo two steps, the intermittent two-dimensional nucleation and the continuous lateral spreading of layers on growth faces.     

An investigation of structural phase transformation and electrical resistivity in Ta films

In this work, we report the effect of substrate, film thickness and sputter pressure on the phase transformation and electrical resistivity in tantalum (Ta) films. The films were grown on Si(1 0 0) substrates with native oxides in place and glass substrates by varying the film thickness (t) and pressure of the working gas (p_Ar). X-ray diffraction (XRD) analysis showed that the formation of α and β phases in Ta films strongly depend on the choice of substrate, film thickness t and sputter pressure p_Ar. A stable α-phase was observed on Si(1 0 0) substrates for t ≤ 200 nm. Both α and β phases were found to grow on glass substrates at all thicknesses except t = 100 nm. All the films grown on Si(1 0 0) substrates for p_Ar ≤ 6.5 mTorr had α-phase with strong (1 1 0) texture normal to the film plane. The glass substrates promoted the formation of β-phase in all p_Ar except p_Ar = 5.5 mTorr. The resistivity ρ was observed to decrease with t, whereas ρ was increased with p_Ar on Si(1 0 0) substrates. In all films, the measured resistivity ρ was greater than the bulk resistivity. The resistivity ρ was influenced by the effects of surface roughness and grain size.     

The Crystallization and Morphology of Isotactic Polypropylene Nucleated by Magnesium Sulfate Whiskers Surface Modified by Pimelic Acid

Pimelic acid (PA) was used to modify the surface of magnesium sulfate whiskers (M-HOS). The treated M-HOS and its effects as a function of concentration on the crystallization and morphology of isotactic polypropylene (iPP) were investigated. Scanning electron microscopy (SEM), wide-angle X-ray diffraction (WAXD), thermogravimetic analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) revealed that PA reacted with M-HOS and formed magnesium pimelate on the surface after the reaction. The results of differential scanning calorimetry (DSC) and polarized light microscopy (PLM) showed that the treated M-HOS had the ability to induce β-spherulites, increase the crystallization temperature and decrease the size of spherulites in iPP. It was the most effective to form β-spherulites when the content of PA treated M-HOS was 5 wt%.     

Morphological and Rheological Properties of Poly(Trimethylene Terephthalate)/Maleic Anhydride Grafted Poly (Ethylene-Octene)/Organoclay Ternary Nanocomposite

Poly(trimethylene terephthalate) (PTT)/poly(ethylene-octene) POE-g-MA/organoclay ternary nanocomposites were prepared using melt blending in order to simultaneously improve the toughness and stiffness of PTT. The phase morphology and dispersion of organoclay were characterized by scanning electron microscope (SEM), X-ray diffractometer (XRD), and transmission electron microscopy (TEM). The melt rheological behavior of the ternary nanocomposites was determined by plate/plate rheological measurements. XRD and TEM analysis indicated that the ternary nanocomposites contained exfoliated nanoparticle when a small amount of organoclay (1 part per hundred) was added. The high aspect ratio of the organoclay platelets induced the average size of the dispersed domain to become smaller. Melt rheological studies revealed that the ternary nanocomposites exhibited strong shear thinning behavior and showed good processability.     

Influence of Mixing Technique on Microstructure and Impact Properties of Isotactic Polypropylene/ Poly(Cis-Butadiene) Rubber Blends

Isotactic polypropylene/poly(cis-butadiene) rubber (iPP/PcBR vol%: 80/20) blends were prepared by melt mixing with various mixing rotation speeds. The effect of mixing technique on microstructure and impact property of blends was studied. Phase structure of the blends was analyzed by scanning electron microscopy (SEM). All of the blends had a heterogeneous morphology. The spherical particles attributed to the PcBR-rich phase were uniformly dispersed in the continuous iPP matrix. With increase of the mixing rotation speed, the dispersed phase particle's diameter distribution became broader and the average diameter of the separated particles increased. The spherulitic morphology of the blends was observed by small angle light scattering (SALS). Higher mixing rotation speed led to a more imperfect spherulitic morphology and smaller spherulites. Crystalline structure of the blends was measured by wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS). The introduction of 20 vol% PcBR induced the formation of iPPβ crystals. Higher rotation speed led to a decrease in microcrystal dimensions. However, the addition of PcBR and the increase of mixing rotation speed did not affect the interplanar distance. The long period values were the same within experimental error as PcBR was added or the mixing rotation speed quickened. The normalized relative degree of crystallinity of the blends slightly increased under lower rotation speeds (30 and 45 rpm) and decreased under higher rotation speeds. The notched Izod impact strength of the blends was enhanced as a result of the increase of mixing rotation speed.