Rhodium‐Catalyzed Cyclization of Diynes with Nitrones: A Formal [2+2+5] Approach to Bridged Eight‐Membered Heterocycles

N‐aryl‐substituted nitrones were employed as five‐atom coupling partners in the rhodium‐catalyzed cyclization with diynes. In this reaction, the nitrone moiety served as a directing group for the catalytic C? H activation of the N‐aryl ring. This formal [2+2+5] approach allows rapid access to bridged eight‐membered heterocycles with broad substrate scope. The results of this study may provide new insight into the chemistry of nitrones and find applications in the synthesis of other heterocycles.     

Sulfur/carbon composites prepared with ordered porous carbon for Li-S battery cathode

Ordered porous cabon with a 2-D hexagonal structure,high specific surface area and large pore volume was synthesized through a twostep heating method using tri-block copolymer as template and phenolic resin as carbon precursor.The results indicated the electrochemical performance of the sulfur/carbon composites prepared with the ordered porous carbon was significantly affected by the pore structure of the carbon.Both the specific capacity and cycling stability of the sulfur/carbon composites were improved using the bimodal micro/meso-porous carbon frameworks with high surface area.Its initial discharge capacity can be as high as 1200 mAh·g~(-1) at a current density of 167.5 mA·g~(-1)The improved capacity retention was obtained during the cell cycling as well.     

Preparation and characterization of Ti0.7Sn0.3O2 as catalyst support for oxygen reduction reaction

Sn-doped TiO_2 nanoparticles with high surface area of 125.7 m~2·g~(-1) are synthesized via a simple one-step hydrothermai method and explored as the cathode catalyst support for proton exchange membrane fuel cells.The synthesized support materials are studied by X-ray diffraction analysis,energy dispersive X-ray spectroscopy and transmission electron microscopy.It is found that the conductivity has been greatly improved by the addition of 30 mol%Sn and Pt nanoparticles are well dispersed on Ti_(0.7)Sn_(0.3)O_2 support with an average size of 2.44 run.Electrochemical studies show that the Ti_(0.7)Sn_(0.3)O_2 nanoparticles have excellent electrochemical stability under a high potential compared to Vulcan XC-72.The as-synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 exhibits high and stable electrocatalytic activity for the oxygen reduction reaction.The Pt/Ti_(0.7)Sn_(0.3)O_2 catalyst reserves most of its electrochemically active surface area(ECA),and its half wave potential difference is 11 mV,which is lower than that of Pt/XC-72(36 mV) under 10 h potential hold at 1.4 V vs.NHE.In addition,the ECA degradation of Pt/Ti_(0.7)Sn_(0.3)O_2is 1.9 times lower than commercial Pt/XC-72 under 500 potential cycles between 0.6 V and 1.2 V vs.NHE.Therefore,the as synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 can be considered as a promising alternative cathode,catalyst for proton exchange membrane fuel cells.     

Efficient oxidation of ethylbenzene catalyzed by cobalt zeolitic imidazolate framework ZIF-67 and NHPI

Efficient catalytic oxidation of ethylbenzene to acetophenone was realized using the catalytic system of cobalt zeolitic imidazolate framework ZIF-67/N-hydroxyphthalimide （NHPI） under mild conditions. 95.2% conversion of ethylbenzene with 90.3% selectivity to acetophenone could be obtained at 373 K under 0.3 MPa 02 for 9 h. The results show that there exists synergetic effect between ZIF-67 and NHPI. 1-Phenylethyl hydroperoxide （PEHP） was generated via a radical process involving the hydrogen abstraction from ethylbenzene by phthalimide N-oxyl, and subsequently effectively decomposed to acetophenone by ZIF-67.     

Co3O4纳米晶催化氧化甲烷的理论研究：C-H键活化的晶面效应及活性中心

甲烷是一种在自然界中大量存在的原材料,在取代原油和合成重要化工产品等许多领域具有潜在的应用价值. 然而,由于CH₄中C-H键的键能特别大（约~4.5 eV）,如何实现甲烷的绿色有效转化在化学化工领域仍然是一个挑战. 本文采用密度泛函理论对Co₃O₄（001）和（011）晶面活化甲烷C-H键的机理进行了理论研究,得到了如下结论：（1） CH₄的C-H键在Co₃O₄晶面的解离具有很高的活性,只需要克服大约1 eV的能垒;（2）与Co^2＋相连的Co-O离子对是CH₄活化的活性位点,其中两个带正负电荷的离子对C-H解离起着协同作用,帮助产生Co-CH₃和O-H物种;（3）（011）面的反应活性明显大于（001）面,与实验的观察一致. 本文的计算结果表明,Co₃O₄纳米晶面对CH₄中C-H键的活化表现出明显的晶面效应和结构敏感效应,Co-O离子对活性中心对于活化惰性的C-H键发挥了关键作用.     

一种新型双亲性有机小分子催化剂在水相体系中催化环己酮与硝基烯烃直接不对称Michael加成反应

设计合成了一系列基于脯氨酸巯基咪唑衍生物的新型双亲性有机小分子催化剂,在水相中加入酸作为助催化剂,可以高效高选择性的催化环己酮与硝基烯烃的不对称Michael加成反应,非对映选择性和对映选择性分别高达99：1和96%.     

分子氧为氧化剂磷钒酸盐为催化剂超深度氧化脱除柴油中的二苯并噻吩

一种“双帽Keggin型”磷钒酸盐在温和的反应条件下以分子氧为氧化剂氧化二苯并噻吩至二苯并噻吩砜的反应中表现出很高的催化活性. 用溶剂萃取或者选择吸附等方法可轻易地将反应产生的二苯并噻吩砜从油品中除去. 这提供了一种新型的分子氧为氧化剂的超深度氧化脱硫方法.     

纤维素直接催化转化制乙二醇及其他化学品:从基础研究发现到潜在工业应用(英)

纤维素直接催化转化制乙二醇是一条极具吸引力的生物质转化途径,有助于减轻化石能源资源的消耗。综述了从该反应途径的发现到获得高效、高稳定性催化剂的快速发展过程。基于对钨基催化剂的大量研究结果,本文讨论了反应机制,明确了反应路径、催化剂状态、钨物种及加氢催化活性中心各自在串联反应中的作用。围绕该反应过程的工业化应用需要,讨论了有关原生木质纤维素生物质催化转化以及高效反应过程的发展策略。在此基础上,将纤维素催化转化制乙二醇过程与生物质发酵制丙酮-丁醇-乙醇的生物炼制路线进行整合,构建出一个理想的反应过程潜在应用范例。最后,对纤维素催化转化制乙二醇反应过程进行了总结和前景展望.     

改性ZSM-5分子筛催化裂解湛江等鞭金藻制取低碳烯烃(英)

研究了湛江等鞭金藻(Isochrysis zhanjiangensis)在改性ZSM-5分子筛上催化裂解制取低碳烯烃的过程.与热裂解过程相比,湛江等鞭金藻催化裂解可以得到更高的低碳烯烃选择性和收率.同时还研究了湛江等鞭金藻中不同油脂和藻渣的催化裂解.结果表明,微藻中的油脂能有效转化为烯烃,其中中性脂的烯烃收率最高,可达36.7%.不同溶剂抽提后得到的藻渣也可转化为低碳烯烃,但收率远低于微藻中的油脂.微藻中的油脂,特别是中性脂,是烯烃的主要贡献者,提高微藻中的中性脂含量能够得到更高的低碳烯烃收率.