蛋白质组学和代谢组学在微生物代谢工程中的应用

构建微生物细胞工厂是化学品、生物能源以及药物分子可持续生产的可行性策略。然而，微生物的代谢复杂、调控严谨，制约着目标产物高效合成。蛋白质组学和代谢组学可以从系统生物学角度分析酶和代谢物组分，从而理解复杂的生物系统，为微生物代谢工程改造提供重要线索。该文介绍了蛋白质组学和代谢组学在微生物代谢工程中的应用，包括基因组尺度代谢模型构建、菌株生物合成优化、指导菌株耐受性改造、限速步骤预测、植物次级代谢途径挖掘，从而为微生物合成天然产物提供新的基因或途径。在此基础上，该文还展望了生物大数据未来的发展方向。     

ZnHZSM-5上丙烷芳构化的研究-丙烷的活化

研究了HZSM－5、ZnHZSM－5和ZnNaZSM－5上的羟基振动光谱和一氧化碳吸附的红外光谱，以及丙烷的芳构化反应．红外光谱中发现表征强B酸的3610cm－1羟基振动峰相对强度由于锌离子的引入和浸渍氢氧化钠而减小，说明了锌离子和钠离子均进入了分子筛的阳离子位；一氧化碳在锌离子上的吸附峰位在2232cm－1，说明进入阳离子位的锌离子是一种强L酸．反应结果表明，锌离子的引入大大地促进了丙烷的转化和芳烃选择性的提高；在一定范围内，随浸渍氢氧化钠量的增加，丙烷转化率下降，而丙烯的选择性和产率增加，说明了锌组份直接参与了丙烷的脱氢过程．Zn－L酸是丙烷活化脱氢的中心，丙烷在该中心上异裂活化直接脱氢．     

铁铝复合柱撑粘土的制备、柱结构和稳定性(I)

用两种方法合成了一系列不同Fe/Al比的铁铝复合柱撑牯土(FeAl-PlLC). 用~(27)Al-NMR、UV、ESR等手段考察了柱溶液的结构和状态, 用XRD、DTA、UV-DRS 等技术对其结构、稳定性进行了研究. 结果表明, 铁铝柱撑粘土的底面间距为1.98～1.55 nm, Fe/Al比对其柱结构、比表面积、热稳定性均有较大影响. Fe/Al<0.5时, 层间柱主要呈现Keggin结构, Fe/Al≥0.5时, 可能为三聚结构. 随Fc/Al比的增加, d(001)值, 比表面面、热稳定性逐渐下降.     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

Depressing defocusing effect in microscopy by bi-orthogonal wavelet transform

For different dimensions, heights and irregular shapes, small and large particles cannot be viewed simultaneously as sharp images under the microscope due to optical defocusing effects. Bi-orthogonal wavelet transform is used in this paper to depress such defocusing effect by merging the wavelet coefficients of the image series. The algorithm is presented in detail, using SWE(13,7) and CDF(2,2), and a few particle images are provided to validate the proposed method.     

Preparation and characterization of vanadium(IV) oxide supported on SBA-15 and its catalytic performance in benzene hydroxylation to phenol using molecular oxygen

Preparation of dispersed transition metal oxides catalyst with low oxidation state still remains a challenging task in heterogeneous catalysis.In this study,vanadium oxides supported on zeolite SBA-15 have been prepared under hydrothermal condition using V 2 O 5 and oxalic acid as sources of vanadium and reductant,respectively.The structures of samples,especially the oxidation state of vanadium,and the surface distribution of vanadium oxide species,have been thoroughly characterized using various techniques,including N 2-physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV-visible spectra(UV-Vis) and UV-visible-near infrared spectra(UV-Vis-NIR).It is found that the majority of supported vanadium was in the form of vanadium(IV) oxide species with the low valence of vanadium.By adjusting hydrothermal treatment time,the surface distribution of vanadium(IV) oxide species can be tuned from vanadium(IV) oxide cluster to crystallites.These materials have been tested in the hydroxylation of benzene to phenol in liquid-phase with molecular oxygen in the absence of reductant.The catalyst exhibits high selectivity for phenol(61%) at benzene conversion of 4.6%,which is a relatively good result in comparison with other studies employing molecular oxygen as the oxidant.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

Facile filling of metal particles in small carbon nanotubes for catalysis

A versatile wet chemistry method is developed for filling of subnanometer sized metal particles in carbon nanotubes with a diameter smaller than 1.5 nm. As an example, we showed that a confined bi-component Pd-V catalyst exhibit a higher benzene hydroxylation activity compared with that within multi-walled carbon nanotubes.     

Numerical analysis of enhanced mixing in a Gallay tote blender

The mixing performance of a multi-bladed baffle inserted into a traditional Gallay tote blender is explored by graphic processing unit-based discrete element method software. The mixing patterns and rates are investigated for a binary mixture, represented by two different colors, under several loading profiles. The baffle effectively enhances the convective mixing both in the axial and radial directions, because of the disturbance it causes to the initial flowing layer and solid-body zone, compared with a blender without a baffle. The axial mixing rate is affected by the gap between the baffle and the wall on the left and right sides, and an optimal blade length corresponds to the maximum mixing rate. However, the radial mixing rate increases with the blade length almost monotonically.     

Harmonic and attosecond pulse enhancement in the presence of noise

<正>In this paper,we theoretically investigate the effect of noise on the photoionization,the generation of the high-order harmonic and the attosecond pulse irradiated from a model He~+ ion.It shows that by properly adding noise fields,such as Gaussian white noise,random light or colored noise,both the ionization probabilities(IPs) and the harmonic yields can be enhanced by several orders of magnitude.Further,by tuning the noise intensity,a stochastic resonance-like curve is observed,showing the existence of an optimal noise in the ionization enhancement process.Finally,by superposing a properly selected harmonic,an intense attosecond pulse with a duration of 67 as is directly generated.