(甲基)丙烯酸酯的基团转移聚合

<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Novel strategy for constant-distance imaging using alternating current scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) still lacks reliable means for performing constant-distance imaging experiments. We demonstrate, for the first time, that the same negative alternating current (AC) feedback can be observed on approach to an insulator and an unbiased conductor at optimal experimental conditions. This leads to a novel constant-distance imaging mode. To perform AC-SECM imaging, only minor modifications of the existing SECM set-up were necessary. The new constant-distance AC-SECM imaging was conducted to provide topographical information not affected by variations in sample conductivity and reactivity. Furthermore, simultaneous AC and DC SECM measurements were carried out to demonstrate that both topographical and chemical information could be revealed.     

Oxygen effects on the interfacial electronic structure of titanyl phthalocyanine film: p-Type doping,band bending and Fermi level alignment

The effect of oxygen doping on titanyl phthalocyanine (TiOPc) film was investigated by ultraviolet photoelectron spectroscopy (UPS). The electronic structure of the interface formed between TiOPc films deposited on highly oriented pyrolytic graphite (HOPG) was clearly different between the films prepared in ultrahigh vacuum (UHV) and under O₂ atmosphere (1.3 × 10⁻² Pa). The film deposited in UHV showed downward band bending characteristic of n-type semiconductor, possibly due to residual impurities working as unintentional n-type dopants. On the other hand, the film deposited under O₂ atmosphere showed upward band bending characteristic of p-type semiconductor. Such trends, including the conversion from n- to p-type, are in excellent correspondence with reported field effect transistor characteristics of TiOPc, and clearly demonstrates that bulk TiOPc film was p-doped with oxygen. In order to examine the Fermi level alignment between TiOPc film and the substrate, the energy of the highest occupied molecular orbital (HOMO) of TiOPc relative to the Fermi level of the conductive substrate was determined for various substrates. The alignment between the Fermi level of conductive substrate and Fermi level of TiOPc film at fixed energy in the bandgap was not observed for the TiOPc film prepared in UHV, possibly because of insufficient charge density in the TiOPc film. This situation was drastically changed when the TiOPc film exposed to O₂, and clear alignment of the Fermi level fixed at 0.6 eV above the HOMO with the Fermi level of the conducting substrate was observed, probably by p-type doping effect of oxygen. These are the first direct and quantitative information about bulk oxygen doping from the viewpoint of the electronic structure. These results suggest that similar band bending with Fermi level alignment may be also achieved for other organic semiconductors under practical device conditions, and also call for caution at the comparison of experimental results obtained under UHV and ambient atmosphere.     

现场表面拉曼光谱研究Fe-Mo合金诱导共沉积

现场表面拉曼光谱结果显示，在0．2mol·L-1Na2MoO4,pH＝4．0的溶液中，电位正于0．5V（vsSCE）时只观察到多钼酸盐的拉曼峰（940、880和450cm-1）．负于-0．5V时，出现中心位于730cm-1的宽峰．同时电极表面有蓝色膜生成．表明混合氧化态（MO（Ⅳ），MO（Ⅴ））氧化膜的形成．730cm-1的峰在-1．9V时仍然存在，说明氧化膜没有被进一步还原．在钼酸钠溶液中同时含有0．1mol·L-1FeSO4和0．2mol·L-1柠檬酸时，中间态氧化膜的拉曼峰的中心移到740cm-1．且峰强度随着电位从-1．3V负移到-1．9V而逐渐减弱并最终消失．电极表面沉积层呈银白色，说明由于Fe2 的存在，钼的中间态氧化膜的结构发生了变化，能够被进一步还原形成Fe－Mo合金，表现出诱导共沉积的特征．     

Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

A new Fluorimetric Reagent for Highly Selective and Sensitive Determination of Terbium Ion

 In this work, a new ligand, 2,9-bis[N,N-bis(carboxymethyl)-aminomethyl]-1,10-phenanthroline (BBCAP), was synthesized and used to establish a novel fluorimetric method for the determination of trace amounts of terbium in a binary system. Its luminescence mechanism was studied. The excitation and emission wavelengths are 284 nm and 547 nm, respectively. Other rare-earth metal ions in 100-fold excess caused no interference. The fluorescence intensity was a linear function of the concentration of terbium in the range of 5.0 × 10⁻¹⁰–1.0 × 10⁻⁶ mol/L. The detection limit was 2.0 × 10⁻¹¹ mol/L (n = 12). The standard addition method was used to determine the terbium in a synthetic rare-earth sample with satisfactory results. This method represents a direct, rapid, selective and sensitive analytical procedure with a widely linear range. Received November 29, 2001 Revision February 9, 2002     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

反相高效液相色谱法分析无机阴离子研究

本文研究了提高ＲＰ－ＨＰＬＣ测定无机阴离子的选择性的方法，设计了利用对离子试剂和背景试剂兼作ｐＨ调节剂，建立了几种分离分析系统和实际样品分析方法。