一类具无穷时滞泛函微分方程的周期解

讨论具有无穷时滞中立型泛函微分方程$ \frac{\rm d}{{\rm d}t}\left(x(t)-\int_{-\infty}^{0}g(s,x(t+s)){\rm d}s\right) =A(t,x(t))x(t)+f(t,x_t)$的周期解问题,利用重合度理论中的延拓定理得到了周期解的存在性和唯一性条件;特别地,当$g(s,x)\equiv 0, A(t,x)=A(t)$时, 给出了存在唯一稳定周期解的条件.     

半变系数模型PLS估计的渐近正态性

半变系数模型在统计建模中具有重要的应用．最近几年，人们提出了许多方法来估计其常系数和函数系数，但是估计的渐近性质还没有被系统的研究．本文介绍了半变系数模型的PLS估计，在Fan和Huang对常系数渐近性质研究的基础上，给出了函数系数的渐近正态性。     

Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

流动-差热吸附量热系统 Ⅰ. 装置考察与氢型丝光沸石(HM)-苯体系吸附热的测定

本文介绍了一种差热分析(DTA)与色谱联用的吸附量热系统。经特别设计的柱恒温箱把差热与色谱结合起来, 达到了吸附量热所要求的高灵敏度与低噪声。配置了可变宽度的矩形脉冲进样系统。进样与响应的同步性良好。结合 HM-苯体系吸附热的测定, 给出了量热图谱的解析方法。得出了与文献中吸附微量热计接近的结果。利用本系统还可获得吸附平衡的信息。结果表明, 量热与吸附平衡实验数据之间具有良好的一致性。本系统适用于在接近工业反应的动态条件下研究催化剂的吸附性能。     

Synthesis of molecular sieve AlPO4-12

A member of the novel family of crystalline microporous aluminophosphates, AlPO₄-12, was synthesized by hydrothermal crystallization using different aluminum-containing compounds. Three new crystalline phases were obtained by varying the composition of the reaction mixture. The effect of the synthesis conditions on the hudrothermal process and the kinetics of crystallization are discussed. The apparent activation energies obtained for AlPO₄-12 are 20.9 and 14.6 kcal/mol for nucleation and crystallization, respectively. The adsorption isotherms of one AlPO₄-12 product were measured.     

甲醇在超临界环已烷中形成簇团的Monte Carlo初探

用Ｍｏｎｔｅ Ｃａｒｌｏ方法研究了甲醇－环己烷体系的微观结构随压力（密度）的变化情况，结果表明，在临界区域甲醇分子的聚集最为明显，形成的甲醇团簇尺寸最大，溶剂分子在甲醇周围的局部密度则在低于临界区或亚临界区较大。     

超细Ni-Cu-Co-La的制备及其催化乙腈加氢性能

以水合肼和硼氢化钾为共还原剂制备了四元合金催化剂Ni-Cu-Co-La,并将其应用于乙腈催化加氢反应.采用X射线衍射、X射线光电子能谱、透射电镜和H2程序升温脱附对催化剂进行了表征,考察了催化剂组分对乙腈选择性加氢制乙胺催化性能的影响.结果表明,Cu,Co和La的加入均不同程度地提高了催化剂的活性和选择性,在反应压力1.8 MPa,反应温度120℃,反应时间1 h的条件下,乙腈转化率和乙胺选择性分别为100%和98.24%,优于使用Raney Ni、非晶态Ni-B和Co-B合金催化剂时的结果.     

Nontrivial structural organization of pivalate complexes with the fragment {Fe2Li(μ3-O)}

1. Download : Download high-res image (228KB)
2. Download : Download full-size image