Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.     

Radon and gamma-radiation measurements in schools on the territory of the abandoned uranium mine “Žirovski vrhl”

On the territory of the abandoned uranium mine irovski vrh, Slovenia, indoor radon and gamma dose rate measurements were carried out in nineteen schools from February 10 to May 10, 1995, using scintillation cells and etched track detectors for radon and thermoluminescence dosimeters for gamma-ray detection. In five schools indoor radon levels exceeded 400 Bq·m^-3, which is the proposed Slovene action level. The maximum average radon value of 1600 Bq·m^-3 and the maximum gamma-dose rate of 172 Sv·month^-1 were found in the same school. According to the ICRP 65 methodology, annual effective doses from radon decay products ranged from 0.05 to 6.10 mSv for pupils and from 0.04 to 4.90 mSv for teachers. Gamma dose rates ranged from 0.05 to 0.19 mSv·y^-1 for pupils and from 0.07 to 0.27 mSv·y^-1 for teachers.     

Detecting proximities between quadrupolar nuclei by double-quantum NMR

A robust, easy to optimize, and efficient homonuclear correlation NMR experiment for half-integer quadrupolar nuclei in solids is described and has been experimentally tested on anhydrous Na2HPO4-(23Na, S= 3/2 nucleus) and as-synthesized AlPO4-14 (27Al, S= 5/2 nucleus), an aluminophosphate molecular sieve.     

Development of a radiochemical neutron activation analysis procedure for determination of rhenium in biological and environmental samples at ultratrace level

Summary Radiochemical neutron activation procedures using liquid-liquid extraction with tetraphenylarsonium chloride in chloroform from 1M HCl and solid extraction with ALIQUAT 336 incorporated in a polyacrylonitrile binding matrix from 0.1M HCl were developed for accurate determination of rhenium in biological and environmental samples at the sub-ng ^. g^-1 level. Concentrations of Re in the range of 0.1 to 2.4 ng ^. g^-1 were determined in several botanical reference materials (RM), while in a RM of road dust a value of ~10 ng ^. g^-1 was found. Significantly elevated values of Re, up to 90 ng ^. g^-1 were found in seaweed (brown algae). Results for Re in the brown algae Fucus vesiculosus in which elevated ⁹⁹Tc values had previously been determined suggested possible competition between Re and Tc in the accumulation process.     

Precipitation and recrystallization of uniform CuCl particles formed by aggregation of nanosize precursors

Uniform, spherical CuCl particles were obtained by mixing aqueous solutions of CuCl ₂ and ascorbic acid in the presence of polyvinylpyrrolidone (PVP) as dispersing agent. The size and the uniformity of the resulting particles depended on the volume ratio of the reactant solutions, their concentrations, the distribution of the stabilizers, and the mixing method. The single jet precipitation yielded large spheres of broad size distributions, while the particles obtained by the double jet technique were rather uniform in size. The final colloidal CuCl particles were formed by the aggregation of nanocrystals, initially generated in the system. Depending on the pH of the reaction mixture, these particles slowly change to large CuCl crystals on aging in the mother liquor.     

Investigation of mercury speciation in lichens.

Epiphytic lichens have long been considered to be reliable bioindicators of air pollution. In the present study only one lichen species, Hypogymnia physodes (L.) Nyl., was chosen; this species is very often used for biomonitoring in Europe. Total mercury and methylmercury were determined in lichens taken from various polluted and unpolluted locations in Slovenia, including a mercury mining area around Idrija. Additionally, total gaseous mercury in air was also determined at several sampling points.     

Rapid radiochemical neutron activation analysis for iodine in urine by different separation techniques.

In the present work on radiochemical neutron activation analysis for the determination of iodine in urine samples, the performance of three different radiochemical separation techniques, namely, direct extraction, use of an iodinated ion-exchange resin column and Sch?niger combustion, were intercompared and validated. The practical advantages of the iodinated-resin technique make it most suitable for the rapid routine determination of iodine in urine. It was further verified by participation in an international intercomparison run of urine analysis, and used in a pilot study on iodine determination in the urine of 171 Slovenian schoolchildren, where it gave results in good agreement with the catalytic method.     

Solid-phase microextraction of hop volatiles. Potential use for determination and verification of hop varieties

The composition of hop essential oil is an important tool for evaluation of hop quality. As each hop variety has a typical essential oil pattern (fingerprint), hop oil analyses can be used to distinguish between hop varieties. The headspace solid-phase microextraction (SPME) method as described in this contribution is a simple sample preparation technique and represents an alternative procedure for essential oil fingerprint determination. Different SPME parameters (extraction temperature, extraction time and sample mass) were studied and the results were compared with those obtained by the routine distillation method. It is shown that SPME results can be used for determination and verification of varieties grown in Slovenia by means of principal components analysis.     

Corrosion of Cu-xZn alloys in slightly alkaline chloride solutions studied by stripping voltammetry and microanalysis

The mechanism of corrosion of Cu-xZn alloys (x = 10-40 wt %) in slightly alkaline chloride solutions was investigated by analysing solid reaction products by energy dispersive X-ray analysis (EDS) and dissolved reaction products by differential anodic pulse stripping (DAPS) voltammetry. The corrosion process was studied under open circuit and under potentiostatic conditions at selected potentials. Pure metals were studied comparatively so that an interacting effect of particular metal components in the alloy could be determined. All four Cu-xZn alloys show an improved behaviour compared to pure metals. Under open-circuit condition both components dissolve simultaneously in the solution. With increasing immersion time the preferential, dissolution of zinc in the solution becomes pronounced. It is the highest for Cu-10Zn and the lowest for Cu-30Zn alloy. Under potentiostatic control the dissolution mechanism depends on the electrode potential and changes from exclusive dissolution of zinc to simultaneous dissolution of both components with preferential dissolution of zinc. The latter decreases, as the electrode potential becomes more positive.     

TPR, TPO, and TPD examinations of Cu0.15Ce0.85O(2-y) mixed oxides prepared by co-precipitation, by the sol-gel peroxide route, and by citric acid-assisted synthesis

Temperature-programmed reduction (TPR), oxidation (TPO), and desorption (TPD) studies were performed on three copper-ceria mixed oxide samples having the same nominal composition, Cu0.15Ce0.85O(2-y), but prepared in three different ways: by co-precipitation, the sol-gel peroxide route, and the sol-gel citric acid route. The obtained results reveal that despite a drastic initial drop in specific surface area after consecutive redox cycles, the hydrogen consumption remains constant. This is because CuO is highly dispersed over the surface of CeO2 nanocrystallites and remains highly dispersed even after the agglomeration of CeO2 nanocrystallites in a denser secondary structure. The dispersed CuO is reduced to Cu(0) during the TPR, forming agglomerated metal particles on the surface of partially reduced CeO2. However, after subsequent temperature-programmed oxidation all the Cu(0) is oxidized back into CuO and redispersed over the CeO2 crystallites.