Synthesis and photophysics of novel 8-hydroxyquinoline aluminum metal dye with hole transfer groups

A novel luminescent dye metal complex, (CZHQ)3Al, with 8-hydroxyquinoline aluminum and hole-transporting carbazole units was designed and synthesized. The (CZHQ)3Al optical properties were carefully investigated by UV-vis absorption and fluorescence spectra in diluent solution. The results showed that the luminescent quantum yield of (CZHQ)3Al was 0.62 in DMSO and it emitted red-light with the band gap of 2.89 eV estimated from the onset absorption. In addition, the light-emission of (CZHQ)3Al can be quenched by electron acceptor (dimethylterephalate), where the process followed the Stern-Volmer equation. However, the fluorescent intensities of (CZHQ)3Al were slowly increased with the addition of electron donor (N,N-dimethylaniline). Furthermore, the molecular interactions of (CZHQ)3Al with fullerene (C60) and carbon nanotubes (CNTs) were also respectively investigated, which indicated the metal dye can be used as new fluorescent probe.     

Spectral study on the interaction of cryptophane-A and neutral molecules CHnCl4-n (n=0, 1, 2)

Cryptophane-A was synthesized from vanillin by a three-step method and its spectroscopic properties in different organic solvents were determined. Two absorption bands at about 240-250 and 280-290 nm were observed for cryptophane-A. A fluorescence emission peak was obtained at 320-330 nm using a solution of approximately 10(-5)M cryptophane-A. The interaction of cryptophane-A with chlorinated compounds CH(n)Cl(4 - n) (n=0, 1, 2) in dioxane and ethyl acetate solvents were studied in detail by fluorescence spectroscopy, respectively. The results show that cryptophane-A is well suited for inclusion of CH(2)Cl(2) to form a stable 1:1 complex and the binding constant was estimated to be 19+/-2M(-1). These results were also confirmed by (1)H NMR and CPK models. Larger similar molecules such as CHCl(3) and CCl(4) are unable to enter the cavity of cryptophane-A because of their bigger sizes. However, the fluorescence emission of cryptophane-A can be efficiently quenched by CHCl(3) and CCl(4), following the Stern-Volmer relationship.     

Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO催化剂的制备与表征

采用浸渍法对无定形ZnO分别用稀H2SO4和(NH4)2S2O8溶液处理, 制备了SO42-/ZnO和S2O82-/ZnO固体酸. 通过固体离子交换法制备了Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO两种催化剂, 并采用XRD, FTIR, TPD和TPR等进行了表征. 研究结果表明, 用稀H2SO4和(NH4)2S2O8溶液分别浸渍处理无定形ZnO, 经过500-600 ℃高温焙烧后得到的SO42-/ZnO和S2O82-/ZnO固体酸表面形成了Zn3O(SO4)2物种; py-FTIR结果表明, 两者均具有B酸中心和L酸中心, 进一步的NH3-TPD研究结果证明, 制备的固体酸NH3脱附峰均出现在543 ℃附近, 属于高强度固体酸. 结构分析认为, 由于SO42-强烈的电子诱导作用, SO42-和ZnO形成的桥式配位物种产生了B酸中心和L酸中心, 而其螯合配位形成的物种没有酸性. SO42-/ZnO和S2O82-/ZnO固体酸与CuCl进行离子交换所制备的Cu(Ⅰ)/SO42-/ZnO和Cu(Ⅰ)/S2O82-/ZnO催化剂的Cu(Ⅰ)易于还原, 对甲醇氧化羰基化合成碳酸二甲酯(DMC)表现出较高的活性和选择性, DMC选择性为98.3%, 时空收率可达到1.9 g(g·h).     

Surface Structure and Catalytic Performance of CuCl/SiO2-Al2O3 Catalysts for Methanol Oxidative Carbonylation

Aluminum was doped into amorphous silica gel to modify its surface structure. The obtained SiO₂-Al₂O₃ support was used to prepare the CuCl/SiO₂-Al₂O₃ catalyst by solid-state ion exchange, and the catalyst activity for liquid-phase oxidative carbonylation of methanol to dimethyl carbonate was investigated. The results showed that the prepared SiO₂-Al₂O₃ support kept the amorphous structure of the silica gel. The BET specific surface area of the silica gel was decreased to 200 m²/g, and the surface acid sites (including Brønsted acid sites) were increased. In the CuCl/SiO₂-Al₂O₃ catalyst, CuCl was not only dispersed on surface but also was ion exchanged with surface Brønsted acid sites of the SiO₂-Al₂O₃ support to form Cu⁺ species, which resulted in a decrease in BET specific surface area to 148 m²/g. These two kinds of Cu⁺ species on the catalyst surface were both active centers for the oxidative carbonylation of methanol to dimethyl carbonate. When the catalyst was prepared with Si/Al molar ratio of 5 and was calcined at 500 °C, the selectivity and space-time yield of dimethyl carbonate reached 74% and 1.27 g/(g·h), respectively.     

Complex dynamics of a chemostat with variable yield and periodically impulsive perturbation on the substrate

In this paper, we consider the dynamic behaviors of a mathematical chemostat model with variable yield and periodically impulsive perturbation on the substrate. The microbial growth rate is the Monod function and the variable yield coefficient δ(S) is quadratic (1 + cS ²). Using Floquet theory and small amplitude perturbation method, we establish the condition under which the boundary periodic solution is globally asymptotically stable. Moreover, the permanence of the system is discussed in detail. Finally, by means of numerical simulation, we demonstrate that with the increasing of the pulsed substrate in the feed the system exhibits the complex dynamics.      

泡沫镍铁合金自支撑NiFeOOH纳米片的制备及析氧性能研究

电催化析氧反应(OER)是电解水制氢的重要半电池反应。然而,OER的缓慢动力学仍需研究高效的电催化剂。在非贵金属催化剂中,NiFe基材料是OER催化剂研究热点。本文通过食人鱼溶液简单一步浸渍刻蚀法将不同Fe含量的泡沫NiFe合金进行氧化,制备了表面具有纳米片形貌的NiFeOOH自支撑电催化剂,并深入研究其电催化析氧性能。通过SEM、XRD、XPS等对电催化剂的形貌结构及成分进行表征,证实了三维多孔基底上NiFeOOH纳米片结构的形成。由于高价镍、铁物种的存在以及二维纳米片结构的生成,NiFeOOH/NF的析氧性能大幅度提高,在10 mA?cm-2的电流密度下过电位仅155.68 mV,Tafel斜率为 88.2 mV?dec-1。这为研制高效、耐用的自支撑非贵金属电极提供了新思路。     

Polyvinyl alcohol-modified graphene oxide as a support for bimetallic Pt–Pd electrocatalysts to enhance the efficiency of formic acid oxidation

The aim of this research was to study the efficiency of polyvinyl alcohol (PVA)-modified graphene oxide (GO) as a supporting material for catalysts that oxidize formic acid. The active metal catalysts (e.g., Pt and Pd) were electrodeposited on PVA/GO surfaces. The morphologies of the prepared catalysts were characterized by scanning electron microscopy and transmission electron microscopy, while their chemical compositions were identified by X-ray diffraction and X-ray photoelectron spectroscopy. The results show that compared with the other catalysts on GO, the prepared active PtPd alloy catalyst nanoparticles with 11.49–20.73 nm sizes were well dispersed on the PVA/GO surfaces. Electrochemical results indicate that the activities of the catalysts with PVA provided a higher current density than that of the catalysts without PVA. The bimetallic 3Pt3Pd/PVA/GO catalyst showed the greatest catalytic activity, stability, and CO oxidation when compared to those of other catalysts. The electronic, morphological, and structural properties promote the mass-charge transfer through the interaction. These results indicate that the PVA-modified GO provides a suitable site for active bimetallic catalyst surfaces, resulting in excellent formic acid oxidation and high CO elimination. The 3Pt3Pd/PVA/GO electrocatalyst is promising for enhancing formic acid oxidation.     

Spectrophotometric determination of nickel in biological samples using 1-azobenzene-3-(3-hydroxyl-2-pyridyl)-triazene

A new sensitive and selective chromogenic reagent, 1-azobenzene-3-(3-hydroxyl-2-pyridyl)-triazene (ABHPT), was synthesized. It has been found that ABHPT reacts with nickel(II) in a borax buffer solution (pH 10.0) to form 2: 1 red complexes with the maximum absorption at 530 nm. The apparent molar absorptivity of the complex is 2.6 × 10⁵ L/(mol cm). Most metal ions can be tolerated in considerable amounts, whereby only zinc and mercury may interfere with the determination of nickel(II). Nevertheless, this can be easily eliminated by prior separation with sulfhydryl dextran gel. A new method for the spectrophotometric determination of trace nickel(II) was developed. Beer’s law is obeyed for 0–15 μg of nickel(II) in 25 mL of solution. The limit of quantification, limit of detection, and relative standard deviation are 0.74 ng/mL, 0.25 ng/mL, and 1.0%, respectively. The method has been applied to the determination of trace nickel(II) in biological samples with satisfactory results. The text was submitted by the authors in English.