Analytical methodologies for aluminium speciation in environmental and biological samples--a review

It is recognized that aluminium (Al) is a potential environmental hazard. Acidic deposition has been linked to increased Al concentrations in natural waters. Elevated levels of Al might have serious consequences for biological communities. Of particular interest is the speciation of Al in aquatic environments, because Al toxicity depends on its forms and concentrations. In this paper, advances in analytical methodologies for Al speciation in environmental and biological samples during the past five years are reviewed. Concerns about the specific problems of Al speciation and highlights of some important methods are elucidated in sections devoted to hybrid techniques (HPLC or FPLC coupled with ET-AAS, ICP-AES, or ICP-MS), flow-injection analysis (FIA), nuclear magnetic resonance (27Al NMR), electrochemical analysis, and computer simulation. More than 130 references are cited.     

微波干法催化芳香醛与绕丹宁及N-苯基绕丹宁的缩合反应

利用微波辐射和固体碱性载体试剂催化绕丹宁及N-苯基绕丹宁和芳香醛的缩合反应合成了14个绕丹宁衍生物并研究了影响反应的因素。     

乙醇在杂多酸上的氧化、脱水和程序升温脱附研究

合成了两个系列具有Keggin结构的12-钒钼磷酸和钨钼磷酸,研究了它们对乙醇氧化、脱水的催化反应。借助程序升温脱附技术研究了反应物及产物乙醇、乙烯、乙醚等在样品上的程脱作用。讨论了钨、钒取代部分钼原于后对杂多酸酸性及氧化性能的影响。     

二维DNA晶体的程序化设计与自组装的研究进展

按照Watson-Crick的碱基配对原则，在理论上能够人工设计与合成DNA碱基序列并自组装成任何一维和二维结构的DNA晶体。DNA分子这种底端向上(bottom-up)的自组装模式为我们提供了一种精确合成纳米材料的方法。本文将从程序化设计、合成刚性的DNA分子瓦(DNA tile)、分子瓦自组装成二维DNA晶体以及二维DNA晶体作为模板在纳米技术中的应用等方面展开，简述这一新奇的并且有着潜在应用前景的研究领域的最新进展。     

土壤微生物ATP、脱氢酶和尿素酶活性的ED50值评价外源镧的生物毒性

０IntroductionRareearthsarenowappliedwidelyinChina，whichcanimprovecropsyieldsandthetheirqualit－ies犤１犦．Thebeneficialeffectsmaybeduetothestimu－latoryeffectsoftheseelementsonthenutrientuptakebyplantsorontheincreasingofchlorophyllsynthesisintheplants犤２犦．Whilealotofresearcheshavebeendoneontheimprovednutritionofcropsafterapplica－tionofrareearths，muchlessattentionhasbeenpaidtothedeteriorationofsoilqualityduetotheapplicationofrareearthsforyears犤３犦．Scientistshavediscoveredthataccumula…     

Development of a modified beta-cyclodextrin based fluorosensor for dipyridamole

2,6-O-diethyl-β-cyclodextrins were prepared and immobilized onto silica gel to develop a fluorosensor for dipyridamole. The analytical performance characteristics of the proposed sensor for analysis of dipyridamole were as follows: the detection limit was 0.8 nmol/L with a relative standard deviation of 1.4% for 10 determinations of 50 nmol/L of dipyridamole. The modification of β-CD improved the sensitivity and selectivity for measuring dipyridamole. The recommended method has been successfully tested for the determination of dipyridamole in clinical samples (urine and pharmaceutical preparations). Received: 23 January 1997 / Revised: 14 April 1997 / Accepted: 21 April 1997     

2-氰基-2,3,3-三甲基-5-硫代-吡咯烷的合成新法

以3,3-二甲基-4-戊烯酸甲酯为原料, 经过6步反应合成了目标产物2-氰基-2,3,3-三甲基-5-硫酮-吡咯烷, 反应的总收率约为37%, 其中关键步骤为分子内环化和碘化氢消除反应. 通过元素分析, ¹H NMR, IR和MS对所合成化合物的结构进行了表征.     

石墨烯负载高活性Pd催化剂对乙醇的电催化氧化

以石墨粉为原料, 采用Hummers法液相氧化合成了氧化石墨(GO), 然后用化学一步还原制得石墨烯负载钯催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明, Pd在石墨烯载体上有较好的分散度, 粒径为3-5 nm. 电化学活性面积(EASA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)等电化学测试表明, 与传统Pd/Vulcan XC-72相比, Pd/石墨烯催化剂对碱性介质中乙醇电催化氧化的催化活性有了很大的提高.     

H2SO4处理的Nb2O5/γ -Al2O3催化剂表面酸性与催化性能研究

用Hammett指示剂法、红外光谱（IR）、示差扫描量热-热重法（DSC-TG）和微型催化反应装置等研究了H₂SO₄处理的负载型Nb₂O₅/γ-Al₂O₃催化剂表面酸性和催化异丁烯（IB）与异丁醛（IBA）反应生成2，5-二甲基-2，4-己二烯（DMHD）的催化性能。结果表明随所用H₂SO₄浓度增加，Nb₂O₅/γ-Al₂O₃催化剂表面酸性增强，B酸量增加，L酸量先增加后下降。经H₂SO₄处理的Nb₂O₅/γ-Al₂O₃催化剂的催化活性明显增加，但当H₂SO₄浓度超过0.05 mol·L^-1时催化活性又急剧下降，这可能是因为在H₂SO₄处理的催化剂表面形成的强酸中心上，产物分子进一步转化为积炭且封闭催化剂活性表面，导致催化活性下降。     

Development of ELISA and immunochromatographic assay for ofloxacin

Two rapid,sensitive and reliable immunoassay methods,namely competitive indirect enzyme-linked immunosorbent assay(CI- ELISA)and colloidal gold-based immunochromatographic assay(CGIA),were developed to detect ofloxacin(OFL).The linear range of the CI-ELISAwas from 0.5 to 128 ng/mL with a limit of detection(LOD)of 0.35 ng/mL.Good recoveries were obtained in analyzing simulated swine urine samples.The CGIA could accurately estimate OFL at concentrations as low as 10 ng/mL in less than 10 min,and test results were read visually without any instrument.