A new family of supramolecular multiferrocenyl rhomboids:Synthesis,characterization,and their electrochemical behavior

Two novel,supramolecular,multiferrocenyl rhomboids 5 and 6 have been successfully constructed from newly designed 60 ferrocenyl donor precursor 1 via coordination-driven self-assembly.The structures of all multiferrocenyl rhomboids were characterized by multinuclear NMR(¹H and ³¹P),CSI-TOF-MS, and PM6 semi-empirical molecular simulation,and their electrochemical behaviors have been investigated.     

冬季平原河网水体溶存甲烷和氧化亚氮浓度特征及排放通量

以长江三角洲上海地区和海河流域天津地区水网为研究对象,对冬季河网表层水体溶存甲烷（CH4）和氧化亚氮（N2O）浓度、饱和度及水-气界面排放通量进行了研究.结果表明,冬季我国平原河网水体溶存CH4和N2O的浓度值都很高,呈高度过饱和状态：CH4浓度均值为0.86mol/L（饱和度：758%）,范围在（0.043±0.001）～（25.3±9.32）μmol/L之间;N2O浓度均值为86.8nmol/L（饱和度：488%）,范围在（9.71±0.41）～（691±35.2）nmol/L之间变化.天津排污河水体CH4和N2O浓度显著高于其他河流（均值分别为38.4mol/L和88.9nmol/L）.水体溶存CH4和N2O浓度、饱和度存在很大的地区差异,上海河网的CH4和N2O浓度和饱和度均值高于天津河网.河网水体水-气界面CH4和N2O排放通量变化范围很广,CH4通量在（1.35±0.22）～（665±246）mol/m2h之间,平均值为24.1mol/m2h,N2O通量在（0.19±0.02）～（22.6±5.05）mol/m2h之间,平均值为2.28mol/m2h.相关分析发现,河网水体溶存CH4浓度与DO显著负相关,与NH4＋显著正相关;N2O浓度则与NH4＋和NO3＋NO2显著正相关.河网水-气界面CH4和N2O排放通量均呈现出市区高郊区和农村低的空间分布规律,污染严重的河流已显然成为大气CH4和N2O的潜在排放源.     

应用多接收器电感耦合等离子体质谱法测定海洋碳酸盐中稳定铅同位素组成

研究了多接收器电感耦合等离子体质谱仪(MC-ICP MS)测定铅同位素比值时,影响测试结果准确度和精密度的主要因素及其优化过程。在优化条件下,10 h内连续30次测定4 ng/mL NIST SRM 981同位素标准溶液铅同位素比值,获得208Pb/206Pb、207Pb/206Pb和206Pb/204Pb相对标准偏差(RSDs)分别为0.005%、0.004%和0.054%。长期监测208Pb/206Pb、207Pb/206Pb和206Pb/204Pb,标准偏差(2SDs)分别为0.000 06、0.000 05和0.006 7。采用NEPTUNE MC-ICP MS法测定了低铅海洋碳酸盐样品中稳定铅的同位素比值,并对南海橙黄滨珊瑚(Porites lutea)和库氏砗磲(Tridacna gigas)进行了分析,得到全流程空白为8～10 pg,重复样误差优于0.1%。经0.50 mol/L HNO3洗脱之后,得到海南珊瑚样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.086 2±0.001 5、0.849 90±0.001 47(n=16);海南砗磲样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.116 9±0.004 2、0.864 81±0.001 62(n=9)。进一步考察了南海海洋碳酸盐中204Pb的同位素比值。分析结果表明,南海海洋碳酸盐中稳定铅同位素比值与中国气溶胶、珠江三角洲大气沉降、黄土及南海海底玄武岩等具有很好的相关性。方法适用于复杂基体高钙低铅的海洋碳酸盐样品中铅同位素比值的分析。     

Transfer of Sulfur: From Simple to Diverse

The introduction of sulfur atoms onto target molecules is an important area in organic synthesis, in particular in the synthesis of pharmaceutical compounds, and a wide variety of sulfuration agents have been developed for thionation reactions over the past few decades. In this Focus Review, we collect and summarize the C? S bond‐formation reactions that have been used to construct C? S bonds in natural products and pharmaceutical compounds.     

An efficient copper-catalyzed N-arylation of amides: synthesis of N-arylacrylamides and 4-amido-N-phenylbenzamides

Copper-catalyzed intermolecular C–N bond-forming reactions between aryl iodides and amides are described using sodium ascorbate, which is both cheap and nontoxic, as the additive. A variety of functionalized amides including some practical, unique secondary amides, such as N-arylacrylamides and 4-amido-N-phenylbenzamides, which are difficult to obtain by the classical methods, are prepared. Furthermore, some tertiary amides are prepared by using copper thiophenecarboxylate.     

A numerically stable restrained electrostatic potential charge fitting method

Inspired by the idea of charge decomposition in calculation of the dipole preserving and polarization consistent charges (Zhang et al., J. Comput. Chem. 2011, 32, 2127), we have proposed a numerically stable restrained electrostatic potential (ESP)‐based charge fitting method for protein. The atomic charge is composed of two parts. The dominant part is fixed to a predefined value (e.g., AMBER charge), and the residual part is to be determined by restrained fitting to residual ESP on grid points around the molecule. Nonuniform weighting factors as a function of the dominant charge are assigned to the atoms. Because the residual part is several folds to several orders smaller than the dominant part, the impact of ill‐conditioning is alleviated. This charge fitting method can be used in quantum mechanical/molecular mechanical (QM/MM) simulations and similar studies, where QM calculated electronic properties are frequently mapped to partial atomic charges. © 2012 Wiley Periodicals, Inc.     

磷化镍催化剂的制备机理及其加氢脱氮性能

采用热重-质谱联用技术研究了次磷酸盐在氮气中的热分解过程,探讨了次磷酸盐热分解法制备磷化镍的反应机理:次磷酸镍中的Ni²⁺能够"催化"H₂PO₂^-低温发生歧化反应生成PH₃,继而还原Ni²⁺得到Ni₂P。制备了不同负载量的Ni₂P/SiO₂催化剂,用X射线衍射(XRD)、低温N₂吸附-脱附、高分辨透射电镜(HRTEM)等分析技术对催化剂结构进行表征。结果表明,Ni₂P活性组分在SiO₂载体上具有良好的分散性,颗粒粒径为5～8 nm。以喹啉为加氢脱氮模型化合物,在高压微型固定床反应器上对催化剂活性进行评价,在反应温度为360℃、氢气压力为2.0 MPa、液时空速为2.0 h^-1、氢油体积比为500:1时,Ni₂P(20%)/SiO₂催化剂的加氢脱氮率为41.5%。     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

FDU-15-Pt composites with different Pt loading and their electrocatalytic reduction to ultratrace nitroaromatic compounds

FDU-15 is a hexagonal mesoporous material with nanometer-sized, highly ordered arrays and large special surface area. In this work, FDU-15-Pt with 2.0%, 5.0% and 8.0% Pt loading were synthesised and used for electrochemical detection of trace nitroaromatic compounds (NACs). The FDU-15-Pt samples were characterised by CO Chemisorption, transmission electron microscopy (TEM) and X-ray diffraction (XRD). It has been demonstrated that FDU-15-Pt with 2.0% Pt loading has the smallest Pt particle size of 2.9?nm, highest Pt metal dispersion of 37.7% and largest Pt metal surface area of 21.36?m^2?g^?1. The FDU-15-Pt/PDDA modified electrode were assembled by electrostatic adsorption of Poly (diallyldimethylammonium chloride) (PDDA) and FDU-15-Pt. The 2.0% FDU-15-Pt modified sensor showed higher selectivity for NACs than those of 5.0% and 8.0% FDU-15-Pt, which were verified by electrochemical experiments. A linear response over TNT concentration ranging from 8.8?×?10^?9?M to 1.2?×?10^?5 M was exhibited with a low detection limit of 2.9?×?10^?9?M (S/N?=?3). Moreover, the proposed 2.0% FDU-15-Pt/PDDA modified sensor has been applied to the detection of NACs in spiked environmental water samples and shows promise for fast and accurate determination of trace NACs in real samples.     

Collective Total Synthesis of Englerin A and B,Orientalol E and F,and Oxyphyllol: Application of the Organocatalytic [4+3] Cycloaddition Reaction

The concise collective total synthesis of englerin A and B, orientalol E and F, and oxyphyllol has been accomplished in 10–15 steps, with the total synthesis of orientalol E and oxyphyllol being achieved for the first time. The success obtained was enabled by the realization of the [4+3] cycloaddition reaction of 9 and 10 . Other features of the synthesis include 1) the intramolecular Heck reaction to access the azulene core, 2) the epoxidation–S_N2′ reduction sequence to access the allylic alcohol, 3) the efficient regioselective and stereoselective formal hydration of the bridging C?C bond in the synthesis of englerins, and 4) the late‐stage chemo‐ and stereoselective C? H oxidation in the synthesis of orientalol E. The total synthesis of these natural products has enabled the structural revision of oxyphyllol and established the absolute stereochemical features of the organocatalytic [4+3] cycloaddition reaction. The identification of 5 as the natural product oxyphyllol, the success in converting 5 to orientalol E, along with the fact that englerins and oxyphyllol were isolated from plants of the same genus Phyllanthus gives support to our proposed biosynthetic pathways. This work may enable detailed biological evaluations of these natural products and their analogues and derivatives, especially of their potential in the fight against renal cell carcinoma (RCC).