Compact resonantly intra-cavity pumped tunable Ho:Sc2SiO5 laser

A compact intra-cavity pumped low threshold continuous-wave Ho:Sc₂SiO₅ laser is reported. The characteristics of output wavelength tuning are investigated by use a intra-cavity briefringent (BF) filter. A wavelength tunable range of 140 nm from 2020 to 2160 nm is achieved. For the free-running mode, the laser slope efficiency is 24.8%, when the output central wavelength is 2110 nm. The laser threshold is about 820 mW of incident pump power. With the BF filter, a maximum output power of 870 mW is obtained at the incident pump power of 5 W, corresponding to a slope efficiency of 20.3%. The characteristics of output wavelength verse the crystal temperature are also investigated.     

基于Visco-SCRAM模型的侵彻装药点火研究

针对弹体侵彻过程中装药的安全性,基于黏弹性统计裂纹力学(visco-statistical crack mechanics, Visco-SCRAM)模型计算装药整体温升、装药裂纹摩擦生热以及弹体装药与壳体摩擦生热,考察这3种机制对装药温升的贡献以及侵彻装药的点火机制,得到了装药点火对应的弹体侵彻临界初始速度。结果表明:(1)装药与弹体内壁摩擦生热对装药温升有一定贡献,随着弹体初始撞击速度的提高,摩擦生热对温升的贡献逐渐增大;(2)黏性、损伤和绝热体积变化导致的装药整体温升对装药点火的作用有限; (3)裂纹摩擦形成热点是侵彻装药点火的物理机制;(4)采用Visco-SCRAM模型可预测低强度、长脉冲载荷作用下的装药点火响应。     

Reduced-order modeling of three-dimensional unsteady partial cavity flows

An efficient reduced-order modeling to analyze three-dimensional unsteady partial cavity flows is proposed. The proposed approach is based on the boundary element method along with the potential flow assumption. To this end, a novel non-iterative method based on the flow eigenmodes of three-dimensional partial cavity flows is applied. Eigenanalysis and reduced-order modeling for unsteady flows over a three-dimensional hydrofoil with various sections are performed. The results obtained from the present analysis are compared with those reported in the literature to verify the strength of the proposed approach. In order to examine the performance of the introduced algorithm for unsteady cavitating flows, various simulations for several reduced frequencies, hydrofoil geometries and different cavitation numbers are also investigated. Comparison between the obtained results using the novel and conventional methods indicates that the present algorithm works very well with sufficient accuracy. Moreover, it is shown that the proposed method is computationally more efficient than the conventional ones for unsteady sheet cavitation analysis on three-dimensional hydrofoils.     

非球面检测中衍射光学补偿器的校准定位研究

在非球面检测中,为了消除衍射光学补偿器的位置偏差.在补偿器的外围设计、制作了位相型反射式菲涅耳波带板作为衍射光学校准器.利用微细加工手段,将补偿器和校准器整体集成在同一片基上.通过位相型反射式菲涅耳波带板的自校准功能,使其衍射光波与参考光波干涉,形成校准干涉条纹.测量时,调节校准干涉条纹成为最简单的形式,即可校正补偿器的离焦、偏心和倾斜误差,实现位置的精确校准.实验中,得到了近似零校准干涉条纹,有效地消除了补偿器的装调误差对测量的影响.     

Target tracking in infrared imagery using a novel particle filter

To address two challenging problems in infrared target tracking, target appearance changes and unpre- dictable abrupt motions, a novel particle filtering based tracking algorithm is introduced. In this method, a novel saliency model is proposed to distinguish the salient target from background, and the eigenspace model is invoked to adapt target appearance changes. To account for the abrupt motions efficiently, a two- step sampling method is proposed to combine the two observation models. The proposed tracking method is demonstrated through two real infrared image sequences, which include the changes of luminance and size, and the drastic abrupt motions of the target.     

Lattice dynamics of room temperature orthorhombic SrHfO3

The lattice dynamics of room temperature orthorhombic phase of SrHfO₃ has been computed, using density functional perturbation theory. The full set of zone center phonon frequencies and infrared reflectivity spectra were reported, providing benchmark theoretical results for the interpretation of future experimental phonon measurements. It is found that the static dielectric constant is relatively anisotropic. This anisotropy has been discussed in relationship to the oscillator strengths and contributions of the lowest IR active modes.     

Pyrolysis oil from fast pyrolysis of maize stalk

Maize stalk was fast pyrolysed at temperatures between 420 °C and 580 °C in a fluidized-bed, and the main product of pyrolysis oil was obtained. The experimental results showed that the highest pyrolysis oil yield of 66 wt.% was obtained at 500 °C for maize stalk. Chemical composition of the pyrolysis oil acquired was analyzed by GC–MS and its heat value, stability, miscibility and corrosion characteristics were determined. These results showed that the pyrolysis oil could be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel could be refined to be used by vehicles.     

乙酸稀土盐催化缩聚合成聚(对苯二甲酸乙二酯-co-己二酸乙二酯)

合成了一系列乙酸稀土盐(乙酸钇,乙酸镧,乙酸钕,乙酸镝),作为单组分催化剂,采用熔融缩聚法催化对苯二甲酸二甲酯、乙二醇和1,6-己二酸的共缩聚反应,制备了芳香族脂肪族共聚酯——聚(对苯二甲酸乙二酯-co-己二酸乙二酯)(PETA).通过1H-NMR,SEC,DSC及力学性能测试表征了聚合物的序列结构,分子量及分布,热性能及机械性能.结果表明,乙酸稀土盐单组分可催化共缩聚反应,效果优良,能够合成高分子量和较窄分子量分布的共聚酯,共聚酯具有较高的拉伸强度和断裂伸长率.     

四氧化二氮微量水标准物质的研制

以四氧化二氮为原料,经预脱水、深度脱水和精馏等处理工艺制备了7种浓度的四氧化二氮微量水标准物质.两家实验室采用核磁共振方法对标准物质中的微量水含量进行定值分析.用方差统计方法对定值结果进行数据处理和不确定度评定.     

丙烯酰氯改性木质素模型物制备丙烯酸单体及聚合活性分析

以木质素模型化合物二氢丁香酚(DH)为原料,利用丙烯酰氯(AC)进行接枝改性制备丙烯酸二氢丁香酚酯(DH-AC)。采用傅里叶变换红外光谱(FTIR)、气相色谱-质谱联用仪(GC-MS)、核磁共振氢谱(1H-NMR)和凝胶色谱(GPC)等分析手段研究了丙烯酸二氢丁香酚酯的结构以及聚合活性。FTIR结果表明二氢丁香酚经过丙烯酰氯改性后,3 495 cm-1为酚羟基伸缩振动吸收峰完全消失,在1 762 cm-1处有新的酯基峰生成,同时在1 631和981 cm-1出现CC的特征吸收峰,表明丙烯酸酯官能团已成功接枝到二氢丁香酚上。1H-NMR分析结果显示DH-AC在δ=5.6的酚羟基质子峰完全消失,同时在δ=6.0,6.4和6.7出现了三个不同的质子峰,这主要是由于乙烯基CHCH₂结构的引入,该结果进一步证明目标产物丙烯酸二氢丁香酚酯结构的正确性。GC-MS结果表明目标产物丙烯酸二氢丁香酚酯的纯度为98.63%。GPC结果显示DH-AC在偶氮二异丁氰(AIBN)作为引发剂的存在下,DH-AC可以发生聚合反应,均聚物相对分子质量结果为：Mw(37400),Mn(23400),Mw/Mn=1.60,表明丙烯酸二氢丁香酚酯单体具有高的聚合活性。丙烯酸二氢丁香酚酯(DH-AC)的制备和性能研究为开发新型木质素基高分子材料奠定了理论基础。