广义变系数模型的Bayesian B样条估计

提出了广义变系数模型函数系数的一种新的估计方法．我们用B样条函数逼近函数系数,不具体选择节点的个数,而是节点个数取均匀的无信息先验,样条函数系数取正态先验,用Bayesian模型平均的方法估计各个函数系数．这种估计方法一个主要特点是允许各个函数系数所需节点个数的后验分布不同,因此允许不同函数系数使用不同的光滑参数．另外,本文还给出了Bayesian B样条估计的计算方法,并通过模拟例子,说明广义变系数模型的函数系数可以由Bayesian B样条估计方法得到很好的估计．     

高非线性度向量弹性函数

利用已知弹性函数级联上高非线性度多输出布尔函数的方法构造（n,m,t）弹性函数,其非线性度为2^n-1-2^n-l/2-1＋2^l/2.nlmax（n-l,m,t）,在相同条件下改进了Kurosawa的非线性度2^n-1-2^n-l/2-1.特别地,本文构造了两类具体的向量弹性函数,得到两个不同的非线性度.本文所得函数的非线性度在大多数情况下是比较好的.     

Darboux Transformation of a Differential-Difference Equation and Its Explicit Solutions

The Darboux transformation of a differential-difference equation associated with a 3 × 3 matrix spectral problem is derived. As an application, explicit soliton solutions of the differential-difference equation are presented.     

High power diode single-end-pumped Nd:YVO4 laser

A fiber-coupled diode-single-end-pumped Nd:YVO₄ laser with an Nd:YVO₄ crystal of 0.3 at% doping concentration and 3×3×10 mm³ dimensions was reported. 14.850 W of continuous-wave output power in an M² factor of 1.12 was obtained under pump power of 27.365 W, with an optical conversion efficiency of 60.49%, and a slope efficiency of 64.5%.     

A Nonconforming Arbitrary Quadrilateral Finite Element Method for Approximating Maxwell's Equations

The main aim of this paper is to provide convergence analysis of Quasi-Wilson nonconforming finite element to Maxwell's equations under arbitrary quadrilateral meshes.The error estimates are derived,which are the same as those for conforming elements under conventional regular meshes.     

Mössbauer study of fired Lishan clay and terra-cotta warriors and horses of Qin dynasty (221 B.C.)

The sherds of terra-cotta warriors and horses and Lishan clay were characterized by Mossbauer spectroscopy, XRD, XRF, NAA, thermal and chemical analyses. Lishan clay was testified as the original material of terracotta warriors and horses, the kilning of these warriors and horses was first carried out in an oxidizing atmosphere, and then changed to a predominantly reducing atmosphere. With refiring experiments, the temperatures of Q3 and Q4 samples were determined to be 830±50 and 980±50°C respectively. Transformations of Lishan clay were determined by firing in oxidizing and reducing atmospheres. The Mossbauer parameters of Lishan clay, which was taken after 2–24h firing, were changing up to 12h.     

混合指数更新模型下平均折现惩罚函数

本文讨论了以混合指数分布为点间间距的更新风险模型下平均折现惩罚函数, 在简单条件下, 利用Dickson and Hipp (2001)中引入的变换方法, 得到了平均折现惩罚函数的Laplace变换的精确表达式.     

离散型半参数广义线性纵向数据模型的方差成分检验

在回归分析中, 随机误差是否存在方差非齐性是大家十分关心的问题, 本文根据Laplace展开原理针对随机效应的影响研究了基于纵向数据的离散型半参数广义线性模型的方差成分检验,得到了Score检验统计量, 最后通过一个实例和计算机模拟验证了本文所提出的方法的有效性.     

200MW非再热双抽供热机组变工况计算及工况图的绘制

工况图在热电厂的设计和运行中具有广泛的用途。本文根据引进型双抽非再热200MW供热机组的技术特点，通过编程在纯凝汽工况、单抽工业抽汽工况、单抽采暖抽汽工况和双抽供热等典型变工况计算的基础上，完成了当新蒸汽负荷、工业抽汽负荷和采暖抽汽负荷发生改变时的变工况计算，并绘制了该机组的运行工况图．     

书籍扫描图像畸变参数自动计算方法的研究

为实现书籍扫描图像的畸变自动校正,提出用多项式来描述各像素的理论灰度g(zi)与页面上对应点到扫描仪工作平面距离zi二者之间的关系。为确立该多项式,在畸变参数已知条件下扫描一幅图像,根据已知畸变参数求出zi,即可按最小二乘法原理由各像素灰度的实际值求出多项式的各个系数。实验证明,采用4阶多项式已能满足一般要求,并求出了各系数。对任意扫描图像,自动计算畸变参数的方法为:首先利用扫描图像上页边空白处各像素的灰度,对畸变参数进行估计,并求出zi的估计值;然后代入所确立的多项式,可求得g(zi);通过调整各畸变参数的估计值,直到g(zi)与gi最为接近,即得最佳畸变参数。用于图像校正实验,获得了较好的校正效果,最大误差由不校正时的41%下降到了6.9%。这使得无需用户测量并输入有关畸变参数即可进行自动校正。