LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

Heat exchanger process dynamics review

Process dynamics have become sufficiently important for literature reviews on specific areas of the field to be justified. In this paper we survey the     

Measurements of Absorption and Anisotropy Coefficients of the Fat Emulsion Intralipid-10%

We report measurements of absorption and anisotropy coefficients of the fat emulsion Intralipid-10%. An addingabsorber method is used for measurement of absorption and anisotropy coefficients of the Intralipid-10%. Using the diffusion theory which has been extended to include anisotropy scat geometry, we found that the standard deviations of multiple measurements for√μα/D are less than 0.6% and the residuals between the measured data and the fits have rms values of 0.1%, where μα is the absorbing coefficient of the solution in our experiment and D is the diffusion coefficient of the medium. The values of the standard deviations and the residuals demonstrate the high precision of the measurements.     

Energy fluctuation and correlation in Tsallis statistics

We investigate the fluctuation of the energy in the framework of Tsallis statistics and find the correlation plays an important role in energy fluctuations. In Tsallis statistics, the correlation is induced by the nonextensivity of Tsallis entropy and exists between particles even if the particles are dynamically independent. By taking the generalized ideal gas as an example, we get that when the particle number N is large enough, the relative fluctuation of the energy is proportional to 1/N instead of in Boltzmann statistics. Thus, the relative energy fluctuation is much smaller in Tsallis statistics than that in Boltzmann statistics. Besides, we demonstrate that the introduction of correlation between particle energies leads to smaller energy fluctuations in Tsallis statistics.     

基于渐进演化策略的增材制造自支撑结构拓扑优化算法

拓扑优化和增材制造分别是先进的结构设计技术和制造技术,将拓扑优化与增材制造融合能产生显著的协同效益.增材制造存在一些独特的制造约束,研究考虑结构自支撑约束的拓扑优化算法,可以降低材料和时间成本.基于SIMP方法框架,建立显式约束函数模型表征结构的自支撑特性,并发展了相应的拓扑优化流程,通过结构渐进演化实现自支撑.研究了相应的灵敏度分析方法,可实现并行计算.提出一个指向性灵敏度过滤算子促进支撑结构演化.采用3个数值算例进行分析,验证了指向性灵敏度过滤的有效性,所有拓扑优化结果均实现了结构自支撑.与典型方法相比,优化结果的可制造性更好.     

送风方式对飞机座舱内污染物传播影响研究

采用数值模拟方法研究了波音737-200座舱模型内的气流场以及污染物传播过程,并通过实验数据加以验证;分析了天花板加侧壁送风(混合送风)、侧壁送风以及天花板送风三种送风方式下座舱内的速度场、涡量场、污染物浓度场和空气龄,并且解释了舱内流场结构对污染物传播过程的影响。研究结果表明:不同送风方式下飞机座舱内污染物的传播过程差异明显,这是由流场结构特征的差异造成的,特别是在小尺度范围内,涡结构十分复杂,严重影响污染物的传播规律;在聚集过程中,污染物更容易在漩涡范围内聚集,而变形主导的气流运动会阻碍污染物向更大范围传播;在排除过程中,天花板送风形式下污染物的排除效率最快,混合送风次之,侧壁送风最慢。这对于防控新冠肺炎是有参考价值的。     

Global bifurcations and multi-pulse chaotic dynamics of rectangular thin plate with one-to-one internal resonance

Global bifurcations and multi-pulse chaotic dynamics for a simply supported rectangular thin plate are studied by the extended Melnikov method.The rectangular thin plate is subject to transversal and in-plane excitation.A two-degree-of-freedom nonlinear nonautonomous system governing equations of motion for the rectangular thin plate is derived by the von Karman type equation and the Galerkin approach.A one-toone internal resonance is considered.An averaged equation is obtained with a multi-scale method.After transforming the averaged equation into a standard form,the extended Melnikov method is used to show the existence of multi-pulse chaotic dynamics,which can be used to explain the mechanism of modal interactions of thin plates.A method for calculating the Melnikov function is given without an explicit analytical expression of homoclinic orbits.Furthermore,restrictions on the damping,excitation,and detuning parameters are obtained,under which the multi-pulse chaotic dynamics is expected.The results of numerical simulations are also given to indicate the existence of small amplitude multi-pulse chaotic responses for the rectangular thin plate.     

Synthesis and crystal structure of an infinite double- stranded chain manganese(II) coordination polymer bridged through 1,2-bis(imidazol-1-yl)ethane ligand

The manganese complex [Mn(bim)₂(NCO)₂]_n (1) (bim = 1,2-bis(imidazol-1-yl)ethane) has been synthesized and structurally characterized by X-ray diffraction analysis. It crystallizes in the monoclinic space group C2/c, a = 9.896(3) Å, b = 15.383(4) Å, c = 13.949(4) Å, β = 98.966(5)^∘, V = 2097.5(9) ų, Z = 4. The coordination geometry of Mn(II) atom is distorted octahedral; it is coordinated equatorially by four nitrogen atoms from the imidazole rings of four symmetry-related bim ligands, and axially by two nitrogen atoms from two symmetry-related cyanate anions. The structure is polymeric, with 18-membered spiro-fused rings and each 18-membered ring involving two inversion-related bim molecules.