Improved enzyme immobilization for enhanced bioelectrocatalytic activity of porous electrodes

Porous electrodes with increased surface area have been prepared using a template route via colloidal crystals. The ordered porous structure and the interconnections between the pores have been quantitatively characterized by Focused Ion Beam Tomography. The internal surfaces of the electrodes have been biofunctionalized with two enzymatic systems for glucose oxidation. In order to increase significantly the stability, the biocatalysts have been immobilized either by crosslinking or by incorporation in an electrodeposition paint. The modified porous electrodes show an increased overall signal and therefore a better detection limit and a higher sensitivity when used as sensors, and a potentially higher power output when employed in biofuel cells.     

Small copper nanoclusters: X-ray absorption analysis

X-ray absorption near edge structure (XANES) spectra at the cooper L_2,3-edge of small cooper nanoclusters has been studied. Theoretical interpretation of XANES spectra measured for small copper nanoclusters have been performed. Theoretical analysis is based on a self-consistent full multiple scattering theory of X-ray absorption as well as on non-muffin-tin finite difference method (FDM). This approach allows choosing the best model for local geometry of small cooper nanoclusters.     

Determination of Hg(II) in waters by on-line preconcentration using Cyanex 923 as a sorbent — Cold vapor atomic absorption spectrometry

Using a solid phase extraction mini-column home-made from a neutral extractant Cyanex 923, inorganic Hg could be on-line preconcentrated and simultaneously separated from methyl mercury. The preconcentrated Hg (II) was then eluted with 10% HNO₃ and subsequently reduced by NaBH₄ to form Hg vapor before determination by cold vapor atomic absorption spectrometry (CVAAS). Optimal conditions for and interferences on the Hg preconcentration and measurement were at 1% HCl, for a 25 mL sample uptake volume and a 10 mL min^− 1 sample loading rate. The detection limit was 0.2 ng L^− 1 and much lower than that of conventional method (around 15.8 ng L^− 1). The relative standard deviation (RSD) is 1.8% for measurements of 40 ng L^− 1 of Hg and the linear working curve is from 20 to 2000 ng L^− 1 (with a correlation coefficient of 0.9996). The method was applied in determination of inorganic Hg in city lake and deep well water (from Changchun, Jilin, China), and recovery test results for both samples were satisfactory.     

Catalytic Activity of Complex-Oxide Perovskite-containing Compositions in Reactions of Oxidation of CO and Organic Compounds

The catalytic activity of composites constituted by a porous metallic or ceramic support, intermediate layers of oxide nature, and perovskite coatings, including those doped with silver, was studied in reactions of deep oxidation of CO and organic compounds of various classes. The relationship between the catalytic activity of a composite and its composition and nature of substances being oxidized was analyzed.     

Ferroelectric phase transitions in Pb2xSn2(1-x)P2Se6 system

Heat capacities of the Pb_2xSn_2(1-x)P₂Se₆ crystals (x=0, 0.098, 0.251, 0.402 and 1.0) were measured using an adiabatic calorimeter at temperatures between 10 and 350 K. In the crystal of x=0, two heat capacity anomalies corresponding to the ferroelectric commensurate - intermediate incommensurate(C-IC) phase transition temperature T _i, and the incommensurate - paraelectric (IC-N) phase transition temperature T _c, were observed at 193.24±0.10 and 220.07±0.15 K, respectively. The phase transition temperatures decreased with an increase in Pb²⁺ concentration. The anomaly at Ti disappeared at x=0.251 in the mixed systems of the Pb_2xSn_2(1-x)P₂Se₆. In the crystal of Pb₂P₂Se₆ (x=1.0), no phase transition was observed. The normal heat capacities for the mixed crystals were determined by least squares fitting of the Debye and Einstein functions to the experimental data. The anomalous heat capacities gave the phase transition entropies of 8.5 and 1.5 J mol^-1 K^-1 for x=0. The large transition entropies are consistent with an order-disorder mechanism in the ferroelectric-paraelectric phase transitions in x=0. This revised version was published online in August 2006 with corrections to the Cover Date.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

The aldol–annulation–fragmentation strategy toward the taxoid diterpene framework revisited. Instructive failures in the chemistry of medium ring containing systems

Central intermediate 5 for the taxoid diterpene framework, prepared by the aldol–annulation sequence, permitted the construction of A-secotaxane frameworks incorporating differentiatable olefin and oxygen functionalities suitable for further elaboration. The key BC-subunits 9 and 8 have proven amenable to efficient conversion into both oxa-bridged 7 and its central eight-membered B-ring analogue 6, providing two potential precursors for taxoid construction. Although their further elaboration into 4 was not progressed at this stage, 6 and 7 are potentially useful synthetic intermediates. Extensive structural studies that included 800 MHz ¹H (200 MHz ¹³C) NMR as well as X-ray crystallographic analyses of 7, 17, and 20 have contributed to the unambiguous elucidation of all the complex structures synthesized.     

Novel approach to bismuth modifying procedure for voltammetric thick film carbon containing electrodes

The novel bismuth modifying technique for disposable thick film carbon containing sensors (TFCC) by means of a surface synthesis of the modifier (bismuth phosphate) have been developed. The optimal composition and the method of cathodic reduction (“activation”) of the modifying BiPO₄ layer has been proposed. These conditions provided the structure of a modifying layer with the bismuth nano particles of size less than 0.1 μm. On the important analytical parameters (sensitivity, accuracy, tolerance to surfactant fouling effect, particularly for Zn), sensor developed (TFCC/BiPO₄) surpasses TFCC with electrolytic bismuth films. The detection limit of 8 nM for zinc, 4 nM for cadmium and 2 nM for lead was achieved after a 2 min accumulation. Therefore, the developed non-toxic and low cost disposable sensor excludes the necessity of mechanical pretreatment of a working surface and can be used in field, laboratory and automatic systems for environmental monitoring (at the trace level inclusive).     

Investigation of the interaction between sodium dodecyl sulfate and cationic polymers

Aggregation properties of sodium dodecyl sulfate (SDS) on a cationic hydroxyethyl cellulose, Polyquaternium-10 (PQ-10), of low charge density were studied by potentiometric and pyrene fluorescence methods and compared with those of poly(diallyldimethylammomium chloride) (PDADMAC) of high charge density. The critical aggregation concentration (cac) was measured with the potentiometric method and further confirmed with the fluorescence method. The former was found to be more accurate. The value of the cac for the SDS/PQ-10 system was measured at 100, 200, and 400 ppm polymer and at 288.2,298.2, and 308.2 K. They showed almost the same cac value, 0.04 mmol dm-3. The I1/I3 value of the pyrene fluorescence spectrum in the SDS/PQ-10 system at higher SDS concentration was smaller than that in SDS/PDADMAC solution and much larger than that of water. From the binding isotherm by the potentiometric method, the free DS- concentration (Cf) and the bound DS- concentration (Cb) could be evaluated with ease over the SDS concentration range above the cac. The aggregation number of DS- aggregates for both the above polymers was evaluated from the fluorescence quenching method using the values of Cf and Cb from the potentiometric method. Because Cf in the SDS/PQ-10 system above the cac did not maintain a constant value contrary to that in the SDS/PDADMAC system but increased quite a lot, Cb should not be regarded as [SDS] - cac above the cac. The aggregation number in the SDS/PQ-10 system increased almost linearly with increasing total concentration of SDS, while that in the SDS/PDADMAC system reached a plateau. With increasing temperature, the aggregation number of the SDS/PDADMAC system decreased more rapidly than that of the SDS/PQ-10 system.     

Comparison between self-reinforced composites based on ultra-high molecular weight polyethylene fibers and isotropic UHMWPE

1. Download : Download high-res image (140KB)
2. Download : Download full-size image