Asymmetric oxidation of sulfenates to sulfinates as a new route to optically active ortho-phosphorylated phenyl sulfoxides

An asymmetric synthesis of benzenesulfinates bearing a phosphonate group at the ortho-position, based on the diastereoselective oxidation of the corresponding sulfenates, has been developed. For this purpose, a number of sulfenates were prepared in high yields by TFFA-promoted condensation of different chiral alcohols with a suitable sulfenyl chloride precursor. Diastereomeric excesses were determined by ³¹P NMR spectroscopic data with the configuration of the newly created stereogenic centre being assigned through correlation and chemical studies. A practical synthesis of both enantiomers of diisopropyl (2-methylsulfinyl)phenylphosphonate 6 in enantiomeric excess close to 85% is also presented.     

Non-linear analysis of functionally graded fiber reinforced composite laminated plates,Part II: Numerical results

In this Part, the extensive parametric studies performed are reported and numerical results are presented for the non-linear vibration, non-linear bending and compressive postbuckling of uniformly distributed and functionally graded fiber reinforced unsymmetric cross-ply and/or antisymmetric angle-ply laminated plates resting on Pasternak elastic foundations under different hygrothermal environmental conditions. The numerical results show that the functionally graded fiber reinforcement has a significant effect on the postbuckling response and load-bending moment curves of plate bending, whereas this effect is less pronounced on the load-deflection curves of plate bending and the linear and non-linear frequencies of the same plate.     

A single-camera technique for simultaneous measurement of large solid particles transported in rapid shallow channel flows

This paper describes a measurement technique that was successfully applied in a study of bed load transport of large spherical solid particles in a shallow and supercritical flow (Fr?=?2.59–3.17) down a steep slope. The experimental condition was characterized by the relatively large solid particle size compared to the flow depth (d _p /h?=?0.23–0.35), and compared to the tracer diameter (d _p /d _t ?≈?130). The technique incorporated particle image velocimetry and particle tracking velocimetry (PTV) to simultaneously measure the characteristics of the two phases. In order to detect true solid particles and to distinguish them from each other and the unwanted objects, a particle characterization (PCR) algorithm based on Hough transform was employed. The output from the PCR process was utilized for PTV, as well as to generate the corresponding tracer images for special needs. Validation tests have confirmed the pixel accuracy and high reliability of the combined technique. Experimental results obtained with the developed technique include flow velocities, particle velocities, and concentration. The analysis has shown that the particle concentration profile followed an exponential relationship of the form similar to that of Rouse’s profiles, despite the large d _p /h ratio. It also revealed the effect of phase interaction, as a low loading rate of light particles on the order of O(10^?3) could yield a noticeable slowdown in the streamwise fluid velocity.     

Electroelasticity of polymer networks

A multiscale analysis of the electromechanical coupling in elastic dielectrics is conducted, starting from the discrete monomer level through the polymer chain and up to the macroscopic level. Three models for the local relations between the molecular dipoles and the electric field that can fit a variety of dipolar monomers are considered. The entropy of the network is accounted for within the framework of statistical mechanics with appropriate kinematic and energetic constraints. At the macroscopic level closed-form explicit expressions for the behaviors of amorphous dielectrics and isotropic polymer networks are determined, none of which admits the commonly assumed linear relation between the polarization and the electric field. The analysis reveals the dependence of the macroscopic coupled behavior on three primary microscopic parameters: the model assumed for the local behavior, the intensity of the local dipole, and the length of the chain. We show how these parameters influence the directional distributions of the monomers and the hence the resulting overall response of the network. In particular, the dependences of the polarization and the polarization induced stress on the deformation of the dielectric are illustrated. More surprisingly, we also reveal a dependence of the stress on the electric field which stems from the kinematic constraint imposed on the chains.     

Viscoelastic response and interlaminar delamination resistance of epoxy/glass fiber/functionalized graphene oxide multi-scale composites

Graphene oxide (GO) was functionalized using three different diamines, namely ethylenediamine (EDA), 4,4′-diaminodiphenyl sulfone (DDS) and p-phenylenediamine (PPD) to reinforce an epoxy/glass fiber (EP/GF) composite laminate, with the aim of improving the overall composite mechanical performance. Different mechanical characterization techniques were used to determine the mechanical performance, including: tensile stress strain, double cantilever beam (DCB) mode-I fracture toughness and dynamic mechanical thermal analysis (DMTA). Scanning electron microscopy (SEM) was used to support the results and conclusions. The results demonstrated remarkable enhancements in the mechanical performance of EP/GF composite laminates by incorporation of functionalized graphene oxide (FGO) nanofiller, whilst the mechanical performance of the GO reinforced composite only improved marginally. Finally, the mechanical performance of the EP/GF/FGO multi-scale composites was found to be dependent on the type of FGO functional groups; of which EDA exhibited the highest performance. These investigations confirmed that the EDA-FGO-reinforced EP/GF composites possess excellent potential to be used as multifunctional engineering materials in industrial applications.     

NFR (Natural Frequency Region) approach for dynamic evaluation of anti-vibration systems with rebound resilience method

There is no universal method to perform dynamic analysis on solid rubber anti-vibration systems. In this article, an equivalent damping ratio is introduced to account for rubber hysteresis using a resilience experiment. A new concept, NFR (Natural Frequency Region), is defined for dynamic evaluation based on natural characteristics of a rubber anti-vibration system itself. Two typical industrial products were selected to verify the proposed NFR approach. The verification procedure involves three parts: natural frequencies, harmonic spectra and impact responses. The dynamic responses from both simulation and experiment have been compared and have not only demonstrated that the proposed approach is reliable but that it could also be used to guide the design of rubber anti-vibration systems in industry. The key points for applying this approach are also presented through the verification procedure.     

A logarithmic complexity floating frame of reference formulation with interpolating splines for articulated multi-flexible-body dynamics

An interpolating spline-based approach is presented for modeling multi-flexible-body systems in the divide-and-conquer (DCA) scheme. This algorithm uses the floating frame of reference formulation and piecewise spline functions to construct and solve the non-linear equations of motion of the multi-flexible-body system undergoing large rotations and translations. The new approach is compared with the flexible DCA (FDCA) that uses the assumed modes method [1]. The FDCA, in many cases, must resort to sub-structuring to accurately model the deformation of the system. We demonstrate, through numerical examples, that the interpolating spline-based approach is comparable in accuracy and superior in efficiency to the FDCA. The present approach is appropriate for modeling flexible mechanisms with thin 1D bodies undergoing large rotations and translations, including those with irregular shapes. As such, the present approach extends the current capability of the DCA to model deformable systems. The algorithm retains the theoretical logarithmic complexity inherent in the DCA when implemented in parallel.     

Mo2C/Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Activity and Biocompatibility for Microbial Fuel Cells

A simple, cost-effective strategy was developed to effectively improve the electron transfer efficiency as well as the power output of microbial fuel cells (MFCs) by decorating the commercial carbon paper (CP) anode with an advanced Mo₂C/reduced graphene oxide (Mo₂C/RGO) composite. Benefiting from the synergistic effects of the superior electrocatalytic activity of Mo₂C, the high surface area, and prominent conductivity of RGO, the MFC equipped with this Mo₂C/RGO composite yielded a remarkable output power density of 1747±37.6 mW m⁻², which was considerably higher than that of CP-MFC (926.8±6.3 mW m⁻²). Importantly, the composite also facilitated the formation of 3D hybrid biofilm and could effectively improve the bacteria–electrode interaction. These features resulted in an enhanced coulombic efficiency up 13.2 %, nearly one order of magnitude higher than that of the CP (1.2 %).