Hyperchaos,quasi-period and coexisting behaviors in second-order-memristor-based jerk circuit

The European Physical Journal Special Topics - This paper generalizes a second-order-memristor-based jerk circuit, which is achieved by substituting the first-order memristor contained diode-bridge...     

Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range. Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation, noise control and one-way propagation.     

小波变换对OCT图像的降噪处理

通过分析光学相干层析成像系统中的噪音源以及不同噪音对成像质量的影响,利用小波变换的方法,结合软阈值滤波对图像去噪,消除噪音对图像的干扰,处理后图像变得清晰了,图像质量得以改善,表明该方法能达到减小图像噪音的目的.     

硫化铟锌的改性合成及光催化特性

随着社会经济的高速发展,能源的短缺和生态的破坏引起了人们的关注。近年来,寻找合适的解决方案已成为关注的重点。作为一种绿色环保技术,光催化由于其高效、低成本等优点而成为能源和环境问题的研究热点。在许多光催化材料中,三元硫化物硫化铟锌(ZnIn₂S₄)由于具有可见光响应特性、简单的制备方法和出色的稳定性而表现出巨大的潜力。然而,较高的载流子复合率限制了其光催化性能。近年来,许多研究报道了改性ZnIn₂S₄以提高其光催化性能,在此,本文详细介绍了各种改性研究,包括ZnIn₂S₄单体的合成、半导体化合物的结构、贵金属沉积、碳元素改性、离子掺杂。然后,系统完整地总结了ZnIn₂S₄在光催化、降解有机污染物、去除六价铬、还原CO₂和有机合成等方面表现出的光催化特性和机理。最后,对ZnIn₂S₄的发展前景提出了展望,以期ZnIn₂S₄光催化剂得到更广泛和深入的研究,尽快在实际生产中得到应用。     

Magnetic properties of some RCo2B2 and RCo4B4 compounds

RCo₂B₂ (R=Pr, Nd, Sm, Gd) and RCo₄B₄ (R=Pr, Nd, Sm) compounds have been investigated by X-ray and magnetometry techniques in the temperature range 4.2-300 K. These compounds crystallize in tetragonal crystal structures of the types CeAl₂Ga₂ and CeCo₄B₄, respectively, with lattice parameters decreasing for increasing atomic weight of the rare earth ion. All compounds order magnetically with the Curie temperatures much below room temperature. Anomalous magnetic behavior is observed for RCo₄B₄ alloys.     

Stress response of Barkhausen noise in a tempered C-Mn steel

The dependence of Barkhausen noise on tensile stress is measured in a high strength vanadium microalloyed C-Mn steel after tempering at 200, 400, 500, 600 and 650°C. Simultaneously, the coercive force and two field parameters related to the magnetic reversal curve are recorded for some of the specimens tempered at 500, 600 and 650°C. Tempering causes a maximum in Barkhausen noise vs. stress curve and minima in the field strength vs. stress curves. An increase in the impedimental force due to stress gradients experienced by domain walls is suggested as the cause of the maximum. Stress gradients with short “wavelenghts” are thought to be produced in lath-or plate-like martensitic/bainitic structures. The effect appears in the course of tempering, as recovery processes reduce the dislocation density, and vanishes as recrystallization leads to an almost complete elimination of these dislocations.     

石墨烯负载高活性Pd催化剂对乙醇的电催化氧化

以石墨粉为原料, 采用Hummers法液相氧化合成了氧化石墨(GO), 然后用化学一步还原制得石墨烯负载钯催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明, Pd在石墨烯载体上有较好的分散度, 粒径为3-5 nm. 电化学活性面积(EASA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)等电化学测试表明, 与传统Pd/Vulcan XC-72相比, Pd/石墨烯催化剂对碱性介质中乙醇电催化氧化的催化活性有了很大的提高.     

以多聚甲醛为还原剂制备新型阳极Pt/CMK-3催化剂

 以多聚甲醛为还原剂,采用液相还原法制备了Pt/CMK-3直接甲醇燃料电池(DMFC)阳极催化剂,并采用透射电镜和X射线衍射技术对其进行了表征. 结果表明,有序介孔碳CMK-3具有规整的二维有序孔道结构,为DMFC中电子和燃料的传输提供了方便的路径,同时它较大的比表面积使得Pt纳米粒子很好地分散在其表面; Pt/CMK-3催化剂中Pt粒子的平均粒径为2.8 nm, 小于E-TEK公司的商品化Pt/XC-72和以甲醇为还原剂制备的Pt/C-M催化剂,并且粒径分布范围窄,结晶度低. 察了Pt/CMK-3催化剂对甲醇的电催化氧化性能,发现Pt/CMK-3催化剂对甲醇氧化的电催化性能优于Pt/XC-72和Pt/C-M催化剂.     

Ultrasonic assisted polyol synthesis of highly dispersed Pt/MWCNT electrocatalyst for methanol oxidation

A novel chemical method based on ultrasonic assisted polyol synthesis for the fabrication of highly dispersed Pt nanoparticles on multi-walled carbon nanotubes (MWCNTs) was developed. The simple and green method took only about 10 min at ambient temperature. The structure and chemical nature of the resulting Pt/MWCNT composites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive X-ray spectrometry (EDS). The results showed that the prepared Pt nanoparticles were uniformly dispersed on the MWCNT surface. The mean size of Pt nanoparticles was about 2.8 nm. Electrochemical properties of Pt/MWCNT electrode for methanol oxidation were examined by cyclic voltammetry (CV) and excellent electrocatalytic activities could be observed. The possible formation mechanism of Pt/MWCNTs was also discussed.     

不同形貌Co3O4的水热-微乳液法制备及其电化学性能

以四元微乳液(水/十六烷基三甲基溴化铵/环己烷/正戊醇)为介质, 在100 ℃水热环境下成功地合成了具有蒲公英状、剑麻状以及捆绑式结构的前驱化合物, 经300 ℃焙烧可得结构保持的Co3O4. X-射线衍射(XRD)、扫描电镜(SEM)测试表明, 所得样品为立方尖晶石结构, 同时水热反应时间对材料的形貌有很大的影响. 循环伏安和恒电流充放电等电化学测试均表明, 水热反应6 h、经热处理后得到Co3O4具有较好的电化学电容行为, 单电极比电容可达340 F·g-1.