孔隙压力作用下圆形巷道围岩的蠕变分析

在原有的岩土流变理论基础上,与渗流力学原理相结合,考虑孔隙压力及孔隙度在岩石蠕变过程中对于岩体变形的影响,在弹性解答的基础上,通过Laplace变换(对应性原理)得出解析解．在一定的假设条件下,利用弹性力学基本方程、蠕变方程及有效应力原理(Terzaghi有效应力方程),采用H-K体模型作为本构方程,将孔隙压力引入到围岩蠕变方程中．给出在孔隙压力作用下的蠕变曲线,并与不考虑孔隙压力和定孔隙压力条件下蠕变曲线相比,其更接近于实际．     

考虑单元劈裂的流-固耦合连续-非连续方法及定向水力压裂模拟

为了更真实地模拟水力压裂过程中的岩石变形、裂缝扩展及流体流动,在自主开发的拉格朗日元与离散元耦合的连续-非连续方法的基础上,发展了一种流-固耦合方法。在该方法中,裂缝可沿四边形单元对角线和单元边界扩展,流体流动满足立方定律。通过与单一裂缝非稳态渗流模型及KGD模型的理论解进行对比,验证了该方法的正确性。由定向射孔水力压裂的模拟结果可以发现,(1)距离射孔越远,流体压力越小;随着时间的增加,裂缝中流体压力降低。(2)随着射孔角度的增加,裂缝起裂和扩展过程中的流体压力及转向距离增加;随着x方向水平应力的增加,裂缝起裂和扩展过程中的流体压力增加;两个方向水平应力之差越大,裂缝转向距离越小。(3)随着时间的增加,裂缝区段数目的增速变慢,这与裂缝体积增加变快有关。     

Evolution of the Flow Structure in the Gap and Near Wake of Two Tandem Cylinders in the AG Regime

Fluid Dynamics - A high-order discontinuous Galerkin method is employed to study the evolution of the flow structure in the gap and near wake of two tandem cylinders in the alternating in the gap...     

Chemical structure and gas products of different rank coals during pyrolysis

Journal of Thermal Analysis and Calorimetry - In this study, three coal samples (long flame coal/LFC, coking coal/CC, and anthracite/AC) from the same coal seam in Huaibei coalfield were simulated...     

Flow field analysis inside a gas turbine trailing edge cooling channel under static and rotating conditions: Effect of ribs

The present work is part of a wider research program which concerns the aero-thermal characterization of cooling channels for the trailing edge of gas turbine blades. The selected passage model is characterized by a trapezoidal cross-section of high aspect-ratio and coolant discharge at the blade tip and along the wedge-shaped trailing edge, where seven elongated pedestals are also installed. In this contribution, a new channel configuration provided with inclined ribs installed inside the radial development region is analyzed, extending the previous results and completing the already available data base, thus providing an overall review of the aero-thermal performance of the considered passage. The velocity field inside the channel was measured by means of 2D and Stereo-PIV techniques in multiple flow planes under static and rotating conditions. The tests were performed under engine similar conditions with respect to both Reynolds (Re = 20,000) and Rotation (Ro = 0, 0.23) numbers. Time averaged flow fields and velocity fluctuation data inside the stationary and rotating channels are analyzed and also critically compared with the data acquired without ribs. In this way the effects on the flow field induced by both rotation and ribs are clearly described. In particular, the ribs modify substantially both the flow field on the channel walls where they are installed and the 3D separation structures that surround the pedestals. If also rotation is taken into account, the relative flow field is characterized by a considerable guiding effect of the ribs coupled with a stronger flow separation on the obstacles that further enhances the heat transfer performances. This behavior was confirmed exploiting the wide thermal data base already available, obtaining a direct link between the observed flow features and the heat transfer performances.     

双空位缺陷双层石墨烯储钠性能的第一性原理研究

采用基于密度泛函理论(DFT)的色散修正方法,研究了Na吸附和嵌入在双空位缺陷(DV)双层石墨烯(BLG)体系中的形成能、电荷转移、电极电势和扩散行为。形成能计算表明,无论单个Na原子在BLG表面吸附还是层间嵌入,均在DV空位中心处更稳定。电荷密度分布和Bader电荷计算表明Na与BLG的结合方式表现出离子性。Na嵌入DV缺陷BLG层间,缺陷浓度增加使BLG由AB堆垛向AA堆垛转变过程推迟;使Na在DV缺陷BLG的表面和层间能够稳定储钠的容量之和增至262.75 mAh?g~(-1),对应浓度Na与C摩尔比为2:17,储钠浓度继续增加,Na在BLG表面吸附容易产生枝晶或团簇。当层间嵌入Na原子时,表面Na原子向DV缺陷中心方向扩散能垒减小、表面Na原子沿相反方向的扩散能垒增加,DV缺陷的存在提高了BLG表面捕获Na的能力。     

Iterative Intensity Integration Technique (IIIT) for contouring reflective surfaces

Intensity Integration Technique (IIT) is an image correlation technique founded on energy conservation principle to contour reflective surfaces. The sum (integral) of intensities along pixel lines is identified as correlation parameter between the loaded and the unloaded images. At present, this procedure is employed to contour 2D reflective plates aided by projected gridlines onto reflected intensity images. Here, the gridline projection is dispensed with thereby simplifying the experimental procedure, with an iterative algorithm, Iterative Intensity Integration Technique (IIIT), developed to contour deformed reflective plates. In illustration, centrally as well as eccentrically loaded circular plates are studied. As a viable extension of IIIT, a method is suggested for generating digital Moiré fringes with pixel lines as grating lines.     

基于相对熵的区间Pythagorean模糊多属性AQM决策方法及其应用

针对决策信息为区间Pythagorean模糊数,属性权重不完全确定的多属性决策问题,提出了一种基于相对熵的AQM决策方法。首先,提出区间Pythagorean模糊数的相对熵,计算了各方案与区间Pythagorean模糊正理想方案和负理想方案间的相对熵,据此构建了基于方案相对满意度最大的非线性规划属性权重确定模型;其次,针对每个属性,利用新的区间Pythagorean模糊数得分函数计算方案的0-1优先关系矩阵,依据AQM方法对所有0-1优先关系矩阵进行融合得到合成0-1优先关系矩阵,并确定了方案的综合度,由此获得方案的排序。最后,以软件开发项目的选取为实例说明了该方法的可行性和有效性。     

Numerical simulation for 2D double-diffusive convection (DDC) in rectangular enclosures based on a high resolution upwind compact streamfunction model I: numerical method and code validation

Applied Mathematics and Mechanics - A high resolution upwind compact streamfunction numerical algorithm for two-dimensional (2D) double-diffusive convection (DDC) is developed. The unsteady...