排序方式: 共有68条查询结果,搜索用时 15 毫秒
1.
The spatial-temporal evolution of coherent structures(CS) is significant for turbulence control and drag reduction. Among the CS, low and high speed streak structures show typical burst phenomena. The analysis was based on a time series of three-dimensional and three-component(3D-3C) velocity fields of the flat plate turbulent boundary layer(TBL) measured by a Tomographic and Time-resolved PIV(Tomo TRPIV) system. Using multi-resolution wavelet transform and conditional sampling method, we extracted the intrinsic topologies and found that the streak structures appear in bar-like patterns. Furthermore, we seized locations and velocity information of transient CS, and then calculated the propagation velocity of CS based on spatial-temporal cross-correlation scanning. This laid a foundation for further studies on relevant dynamics properties. 相似文献
2.
SU CaiHong 《中国科学:物理学 力学 天文学(英文版)》2014,57(5):950-962
Up to now,the most widely used method for transition prediction is the one based on linear stability theory.When it is applied to three-dimensional boundary layers,one has to choose the direction,or path,along which the growth rate of the disturbance is to be integrated.The direction given by using saddle point method in the theory of complex variable function is seen as mathematically most reasonable.However,unlike the saddle point method applied to water waves,here its physical meaning is not so obvious,as the frequency and wave number may be complex.And on some occasions,in advancing the integration of the growth rate of the disturbance,up to a certain location,one may not be able to continue the integration,because the condition for specifying the direction set by the saddle point method can no longer be satisfied on the basis of continuously varying wave number.In this paper,these two problems are discussed,and suggestions for how to do transition prediction under the latter condition are provided. 相似文献
3.
利用高时间分辨率粒子图像测速技术(TRPIV)对回流式水槽中低浓度高分子溶液壁湍流的减阻机理进行实验研究。通过对比分析高分子溶液和纯水平板湍流边界层在相同来流速度下的平均速度剖面、湍流强度和雷诺应力,发现高分子溶液的壁面摩擦阻力减小了21.77%,并且其缓冲层增厚,按对数律外移,雷诺应力减小;高分子聚合物主要在近壁区起到抑制湍流脉动的作用,而在主流区的作用不太明显。用流向局部平均多尺度速度结构函数和相干结构条件采样方法,检测并对比了高分子溶液和水的壁湍流相干结构“喷射”和“扫掠”事件中的脉动速度、展向涡量、雷诺应力等物理量的二维拓扑形态,发现高分子溶液近壁区相干结构在猝发时的脉动速度减小,涡量受到抑制,雷诺应力明显减小,说明高分子溶液湍流近壁区相干结构“喷射”和“扫掠”的强度变弱,猝发频率降低,动量和能量的输运减弱,揭示出高分子溶液减阻的重要机理。 相似文献
4.
利用宏观应力联合原位微拉曼测试技术对双壁碳纳米管(Carbon Nanotube,CNT)纤维和薄膜材料的力学性能进行了实验分析,探讨了拉伸加载期间纤维和薄膜内CNT的载荷响应及其与宏观力学性能的关联,揭示了两种材料力学性能差异性的微观机理。实验分析表明,CNT纤维和薄膜的拉伸变形呈现弹性、强化和损伤断裂三个阶段,但其内的CNT只发生弹性变形,没有塑性形变,且没有明显的损伤或键的断裂,纤维和薄膜呈现阶段性拉伸变形的原因可归结为滑移。纤维的弹性模量显著高于薄膜,是薄膜的4.7倍,原因是弹性阶段纤维中CNT的轴向伸长对宏观应变的贡献较大。纤维和薄膜的拉伸强度相差较小,原因是强化阶段薄膜内不断有大量CNT进入承载队伍,这也使得薄膜具有比纤维更高的韧性。 相似文献
5.
《Journal of solid state chemistry》1987,67(1):131-141
An electrostatic method to determine variable atom parameters in ionic crystals with experimentally determined unit cell parameters and space group is proposed. The atom parameters are usually chosen to give the maximum Madelung constant. However, when these atom parameters generate interatomic distances at least one of which is less than a critical distance, which comes from repulsion between atoms, the atom parameters corresponding to that distance are assigned. Applicability was examined for three cases: TiO2 (rutile), UCl3, and β-Rb2GeF6. Agreement between the atom parameters of this method and of literature was good. Some discussion is presented on the basis of this method. In ionic crystals, the atoms with variable parameters are set first using the geometrical arrangement which is the most stable in an electrostatic sense, and then “real” distances are fixed under the interaction of repulsive forces. 相似文献
6.
基于相同雷诺数下清水和高分子聚合物溶液壁湍流的高时间分辨率粒子图像测速技术(time-resolved particle image velocimetry, TRPIV)的对比实验, 从高聚物溶液对湍流边界层动量能量输运影响的角度分析其减阻的机理. 对比两者的雷诺应力发现高聚物的存在抑制了湍流输运过程. 这一影响与高聚物对壁湍流中占主导地位的涡旋运动和低速条带等相干结构的作用密切相关. 运用条件相位平均、相关函数和线性随机估计(linear stochastic estimation, LSE)等方法, 分析提取了高聚物溶液流场中的发卡涡和发卡涡包等典型相干结构的空间拓扑形态. 相比于清水, 高聚物溶液中相干结构的流向尺度增大, 涡旋运动的发展及低速流体喷射的强度受到削弱, 表明了添加的高聚物阻碍了湍流原有的能量传递和自维持的机理. 正是通过影响相干结构, 高聚物抑制了湍流边界层中近壁区与外区之间的动量和能量输运, 使得湍流的无序性降低, 从而减小了湍流流动的阻力. 相似文献
7.
Qing-Qing Rong Yu-Hong Cui Takahiro Shimada Jian-Shan Wang Takayuki Kitamura 《Acta Mechanica Sinica》2014,30(4):533-539
Self-shaping materials such as shape memory polymers have recently drawn considerable attention owing to their high shape-changing ability in response to changes in ambient conditions, and thereby have promising applications in the biomedical, biosensing, soft robotics and aerospace fields. Their design is a crucial issue of both theoretical and technological interest. Motivated by the shape-changing ability of Towel Gourd tendril helices during swelling/deswelling, we present a strategy for realizing self-shaping function through the deformation of micro/nanohelices. To guide the design and fabrication of selfshaping materials, the shape equations of bent configurations, twisted belts, and helices of slender chiral composite are developed using the variation method. Furthermore, it is numerically shown that the shape changes of a chiral composite can be tuned by the deformation of micro/nanohelices and the fabricated fiber directions. This work paves a new way to create self-shaping composites. 相似文献
8.
Forward-/backward-facing steps in boundary-layer flows are often seen in engineering applications, and they have potential impacts on laminar-turbulent transition through scattering of the oncoming instability modes(e.g., Tollmien-Schlichting(T-S) waves). This issue is studied in the present paper by applying a local scattering framework, which is a rather generic mathematical framework on describing the mode scattering process. In this framework, a high-Reynolds-number triple-deck formalism is employed, and a transmission coefficient, defined as the ratio of the asymptotic amplitude of the instability mode downstream of the step to that upstream, is introduced. Through the systematical study, it has been found that both the forward-and backward-facing steps have a destabilizing effect on the oncoming T-S waves in subsonic boundary layers, this effect increases with the height of the step and/or the frequency of the T-S wave, and a backward-facing step(BFS) always has a greater impact than a forward-facing step(FFS). These facts agree with most of the previous investigations.However, one numerical study(WORNER, A., RIST, U., and WAGNER, S. Humps/steps influence on stability characteristics of two-dimensional laminar boundary layer. AIAA Journal, 41, 192–197(2003)), which was based on an ad-hoc configuration, showed an opposite impact of an FFS. Through the investigation on the specific configuration, it is revealed that the wrong conclusion was drawn by misinterpreting the numerical results. 相似文献
9.
We revisit an iconic deformation of non-linear elasticity: the inflation of a rubber spherical thin shell. We use the 3-parameter Mooney and Gent-Gent (GG) phenomenological models to explain the stretch–strain curve of a typical inflation, as these two models cover a wide spectrum of known models for rubber, including the Varga, Mooney–Rivlin, one-term Ogden, Gent-Thomas and Gent models. We find that the basic physics of inflation exclude the Varga, one-term Ogden and Gent-Thomas models. We find the link between the exact solution of non-linear elasticity and the membrane and Young–Laplace theories often used a priori in the literature. We compare the performance of both models on fitting the data for experiments on rubber balloons and animal bladder. We conclude that the GG model is the most accurate and versatile model on offer for the modelling of rubber balloon inflation. 相似文献
10.
面向微尺度平面变形的精细测量对碳纳米管应变传感测量方法进行了理论与实验研究。利用碳纳米管的拉曼应变敏感性及其偏振选择性,针对各种典型的拉曼光谱系统偏振构型,推导建立了适于各种偏振拉曼构型的碳纳米管平面应变传感解析关系式。从测量学角度出发,对不同偏振构型下的应变传感进行了对比分析,得出入射与散射光偏振方向皆能够连续控制且始终保持平行的双偏协同构型最适合于平面应变传感,并进一步提出易于实现的双偏协同构型光路配置方式与控制方法。通过实验应用证明,所提出的方法能够有效的实现基于偏振拉曼的碳纳米管平面应变传感测量。 相似文献