Bio-Plasmonics: Nano/micro Structure of Surface Plasmon Resonance Devices for Biomedicine

We have reported a novel design of surface plasmon resonance (SPR) device, which uses alternating dielectric layers to enhance the SPR signal quality and modulate its resonant position. Admittance loci method of thin film design has been used in the design of such a device. The use of biomolecular thin film, such as DNAs or Porteins, in this design can result in resonant condition of wavelength changes as well. Bio-plasmonics is proposed for the research and development of novel devices, which use biomolecules as a part of the plasmon oscillation system to actively interact with nano/micro structure.     

Fully-developed pipe and planar flows of multimode viscoelastic fluids

Two solutions are presented for fully-developed pipe and planar flows of multimode viscoelastic models. The fluids have a Newtonian solvent contribution and the polymer modes are described by the Phan-Thien—Tanner (PTT), the FENE-P or the Giesekus equation. The first solution is exact and can handle any number of modes, but is only semi-analytical. The second solution, which is presented only for the PTT model with a linear stress coefficient and the FENE-P model, can also handle any number of modes. It is based on a truncated series expansion and is completely analytical, but provides only an approximated solution. The complexity of the multimode solutions is investigated first with the exact semi-analytical method and it is shown that at high Deborah number flows the high-order stresses can become as important as the stress of the first mode. It is also under these conditions that the approximated analytical solution deviates from the exact semi-analytical solution. A criterion for the accurate use of the approximated solution is presented. Fortran codes are provided to obtain these solutions at the internet address at the end.     

Electric field and force on a conducting sphere in contact with a dielectric solid

This paper presents the analysis of electric field and force on a conducting sphere lying on a dielectric solid under a uniform field. To achieve high accuracy, we have applied the analytical method of successively placing three infinite sequences of point and dipole charges (zero- or first-order multipoles). The electric field is highest at the contact point, called the triple junction, where the conductor, the dielectric solid, and the surrounding medium (gas or vacuum) meet together. Both the contact-point field and the force increase with the permittivity ratio of the solid to that of the surrounding medium. The resulting force always attracts the sphere to the solid, in contrast to the repulsive force in the case of a conducting sphere lying on a plane conductor under an external field. We have given very simple formulae for approximating the contact-point field and the force which agree with the precise values within a difference of 3% for permittivity ratios up to 32 and 64, respectively.     

Duration-Dependent Asymmetry in Photoionization of H atoms in Few-Cycle Laser Pulses

The photoionization of H atoms irradiated by few-cycle laser pulses is studied numerically. The variations of the total ionization, the partial ionizations in opposite directions, and the corresponding asymmetry with the carrier-envelope phase in several pulse durations are obtained. We find that besides a stronger modulation on the partial ionizations, the change of pulse duration leads to a shift along carrier-envelope （CE） phase in the calculated signals. The phase shift arises from the nonlinear property of ionization and relates closely to the Coulomb attraction of the parent ion to the ionized electron. Our calculations show good agreement with the experimental observation under similar conditions.     

An Average-Stretch Full-Network Model for Rubber Elasticity

Two constitutive models that are based on the classical non-Gaussian, Kuhn-Grün probability distribution function are reviewed. It is shown that all chains of a network cell structure comprised of a finite number of identical chains in an affine deformation referred to principal axes may have the same invariant stretch, if and only if the chains are oriented initially along any of eight directions forming the diagonals of a unit cube. The 4-chain tetrahedral and the 8-chain cubic cell structures are familiar admissible models having this property. An easy derivation of the constitutive equation for the Wu and van der Giessen full-network model of initially identical chains arbitrarily oriented in the undeformed state is presented. The constitutive equations for the neo-Hookean model, the 3 -chain model, and the equivalent 4- and 8-chain models are then derived from the Wu and van der Giessen equation. The squared chain stretch of an arbitrarily directed chain averaged over a unit sphere surrounding all chains radiating from a cross-link junction as its center is determined. An average-stretch, full-network constitutive equation is then derived by approximation of the Wu and van der Giessen equation. This result, though more general in that no special chain cell morphology is introduced, is the same as the constitutive equation for the 4- and 8-chain models. Some concluding remarks on extensions to amended models are presented.     

Detection of low caloric power of coal by pulse fast-thermal neutron analysis

This paper introduces the analysis method and principle of pulse fast-thermal neutron analysis (PFTNA). A system for the measurement of low caloric power of coal by PFTNA is also presented. The 14 MeV pulse neutron generator and BGO detector and 4096 MCA were applied in this system. A multiple linear regression method applied to the data solved the interferential problem of multiple elements. The error of low caloric power between chemical analysis and experiment was less than 0.4 MJ/kg. This revised version was published online in July 2006 with corrections to the Cover Date.     

Highly reflective AlGaAsSb/InP Bragg reflector at 1.55 μm grown by MOVPE

The metalorganic vapor-phase epitaxy growth of a highly reflective 24-pair AlGaAsSb/InP-distributed Bragg reflector (DBR) is reported for the first time. The influence of the growth parameters such as the V/III input ratio, the growth temperature and the pressure, the total H₂ flow, the gas velocity and the switching sequence of the source gases at the interfaces has been deeply investigated and optimized to achieve stable growth conditions. The DBR achieves a reflectivity as high as 99.5% around 1.55 μm, a uniform stable composition, and an excellent crystal quality over the 2 inch wafer, with a surface free of crosshatch and a defect density below 1/cm². For the optical characterizations, measurements of linear and nonlinear reflectivity, transmission, pump-probe and photoluminescence were done. The interfaces and bulk layers of InP/AlGaAsSb/InP heterostructures were analyzed by transmission electron microscopy. High resolution X-ray diffraction measurements were used to determine the composition shift in the growth plane of the DBR. The measurements show the high quality of the growth and demonstrate that thick AlGaAsSb/InP heterostructures can be grown by metalorganic vapor-phase epitaxy (MOVPE), and in particular DBRs above 1.31 μm.     

Nonlinear transient analysis of moderately thick laminated composite sector plates

This study presents a simple formulation for the nonlinear dynamic analysis of shear-deformable laminated sector plates made up of cylindrically orthotropic layers. The non-axisymmetric formulation in cylindrical coordinates is discretized in space domain using two-dimensional Chebyshev polynomials. Houbolt time marching is used for temporal discretization. Quadratic extrapolation is used for linearization along with fixed-point iteration for obtaining the results. Several combinations of simply supported, clamped and free edge conditions are considered. Convergence study has been carried out and the results are compared with the results of square plates. Effects of boundary conditions, moduli ratio, lamination scheme, sector angle and annularity on the transient deflection response are plotted graphically. Transient responses are compared for step, saw-tooth and sinusoidal loadings.