Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

Crystallization temperatures of thin Co−Zr amorphous alloy films from electron diffraction

The transformation of amorphous thin alloy films of Co–Zr to the crystalline state was observed with an electron microscope in the diffraction mode. This investigation elucidates the crystallization temperatures,T _x , of thin films as opposed to theT _x presented for thicker samples; usually melt-quenched in the thickness range of 20–50 m. TheT _x of the thin films are compared also with theT _x for sputtered alloys of Co–Zr at 5 m.     

A DSC study of the effects of sugars on thermal properties of rice starch gels before and after aging

Thermal characterization of gelatinized binary rice starch-water and ternary starch-sugar-water gels before and after aging was carried out using differential scanning calorimetry. The glass transition temperature of the maximally freeze-concentrated solution (T_g) in both fresh and aged gels was observed to decrease progressively with increasing sugar concentration. Aging of the gels generally shiftedT_g to higher temperatures, but had little or no effect on the ice melting peak temperature (T _m). The presence of various sugars could either accelerate or retard starch (amylopectin) recrystallization, depending on the type and concentration of sugar, as well as on starch/water ratio. A hypothesis based on the dual antiplasticizing-plasticizing effects of sugars was postulated to explain the observed effects. Of the sugars studied, xylose and fructose appeared to display exceptional retardative and accelerative effects, respectively, on retrogradation.This study was funded by a Sixth Malaysia Plan R&D grant under the Intensification of Research Priority Areas (IRPA) Program of the Ministry of Science, Technology and Environment, Malaysia. We thank Dr. Harry Levine and Dr. Louise Slade for giving us the opportunity to contribute a paper to this special issue of JTA.     

Solvent extraction of lanthanum(III), europium(III) and lutetium(III) with fluorinated 1-phenyl-3-methyl-4-benzoyl-5-pyrazolones into chloroform

A series of chelating reagents, 1-phenyl-3-methyl-4-(2-fluorobenzoyl)-5-pyrazolone, 1-phenyl-3-methyl-4-(3-fluorobenzoyl)-5-pyrazolone and 1-phenyl-3-methyl-4-(4-fluorobenzoyl)-5-pyrazolone, has been synthesized. The extraction of Ln(III), (Ln = La, Eu and Lu) into chloroform with these reagents at 30 +/- 1 degrees has been studied. The composition of the complexes extracted has been determined by the slope method, and the extraction constants K(ex), were measured. The presence of the fluorine atom in the reagents does not make the K(ex), values much different from those obtained with the parent pyrazolone.     

Synthesis and Crystal Structure of a Novel Polymeric Lead(II) Compound: [Pb2(phen)2(N3)3(ClO4)]n

A 2D lead(II) coordination polymer [Pb₂(phen)₂(N₃)₃(ClO₄)]_n,( 1 ) containing 1,10‐phenanthroline (phen) and two different anions, has been synthesized and characterized by elemental analysis, IR and ¹H NMR spectroscopy and X‐ray crystallography. The single‐crystal X‐ray data show two different kinds of Pb²⁺ ions with coordination numbers of eight, Pb1 = PbN₆O₂ and Pb2 = PbN₈, with hemidirected and holodirected structures, respectively. The supramolecular features in 1 is negiotated through the weak but directional C‐H···O and C‐H···N interactions and aromatic π–π stacking interactions.     

Extraction and coordination studies of carbamoyl methyl sulfoxide (CMSO) with uranyl bis(β-diketonates). Synthesis and molecular structure of [{UO2(DBM)2}2C6H5CH2SOCH2CONHC6H5]

The carbamoyl methyl sulfoxide compounds of uranyl bis(β-diketonate) of the types [UO₂(DBM)₂CMSO] and [{UO₂(DBM)₂}₂CMSO] (where HDBM = C₆H₅COCH₂COC₆H₅; CMSO = C₆H₅CH₂SOCH₂CONHC₆H₅ or C₆H₅SOCH₂CONⁱPr₂) have been synthesized and characterized by IR and NMR spectroscopic techniques and elemental analysis. Spectral studies show that CMSO acts as a monodentate ligand in [UO₂(DBM)₂CMSO] compounds and bonds through the sulfoxo oxygen atom to the uranyl group. It acts as a bridging bidentate ligand in [{UO₂(DBM)₂}₂CMSO] compounds and bonds through both the sulfoxo and carbamoyl oxygen atoms to two different uranyl groups. The structure of the compound [{UO₂(DBM)₂}₂C₆H₅CH₂SOCH₂CONHC₆H₅] confirms the bridging bidentate mode of coordination for the CMSO ligand. Extraction studies show an enhancement in solvent extraction for the uranyl ion from nitric acid medium when a mixture of thenoyl trifluoroacetone (HTTA) and CMSO was employed.     

A modulated dsc study on the in situ polymerization of cyclic butylene terephthalate oligomers

The polymerization of a cyclic butylene terephthalate (CBT) oligomer was studied as a function of temperature (T=200 and 260°C, respectively) by modulated DSC (MDSC). The first heating was followed by cooling after various holding times (5, 15 and 30 min) prior to the second heating which ended always at T=260°C. This allowed us to study the crystallization and melting behavior of the resulting polybutylene terephthalate (PBT), as well. In contrary to the usual belief, the CBT polymerization is exothermic and the related process is superimposed to that of the CBT melting. The melting behavior of the PBT was affected by the polymerization mode (performed below or above the melting temperature of the PBT product) of the CBT. Annealing above the melting temperature of PBT yielded a product featuring double melting. This was attributed to the presence of crystallites with different degrees of perfection. The crystals perfection which occurred via recrystallization/remelting was manifested by a pronounced exothermic peak in the non-reversing trace.     

Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.