VUV-UV excited luminescent properties of LnCa4O(BO3)3:RE (Ln=Y, La, Gd; Re=Eu, Tb, Dy, Ce)

Calcium lanthanide oxyborate doped with rare-earth ions LnCa₄O(BO₃)₃:RE³⁺ (LnCOB:RE, Ln=Y, La, Gd, RE=Eu, Tb, Dy, Ce) was synthesized by the method of solid-state reaction at high temperature. Their fluorescent spectra were measured from vacuum ultraviolet (VUV) to visible region at room temperature. Their excitation spectra all have a broadband center at about 188 nm, which is ascribed to host absorption. Using Dorenbos’ and Jφrgensen's work [P. Dorenbos, J. Lumin. 91 (2000) 91, R. Resfeld, C.K. Jφrgensen, Lasers and Excite States of Rare Earth [M], Springer, Berlin, 1977, p. 45], the position of the lowest 5d levels E(Ln,A) and charge transfer band E_ct were calculated and compared with their excitation spectra.Eu³⁺ and Tb³⁺ ions doped into LnCOB show efficient luminescence under VUV and UV irradiation. In this system, Ce³⁺ ions do not show efficient luminescence and quench the luminescence of Tb³⁺ ions when Tb³⁺ and Ce³⁺ ions are co-doped into LnCOB. GdCOB doped with Dy³⁺ shows yellowish white light under irradiation of 254 nm light for the reason that Gd³⁺ ions transfer the energy from itself to Dy³⁺. Because of the existence of Gd³⁺, the samples of GdCOB:RE³⁺ show higher excitation efficiency than LaCOB:RE³⁺ and YCOB:RE³⁺, around 188 nm, which indicates that the Gd³⁺ ions have an effect on the host absorption and can transfer the excitation energy to the luminescent center such as Tb³⁺, Dy³⁺ and Eu³⁺.     

Enantioselective olefin epoxidation using novel biphenyl and binaphthyl azepines and azepinium salts

Homologous biphenyl and (diastereomeric) binaphthyl tertiary azepines and quaternary iminium salts were prepared from (S)- and (R)-3,3-dimethylbutan-2-amine. Both the amines and iminium ions behave as effective catalysts for the enantioselective epoxidation of unfunctionalized olefins (ee up to 87%).     

Solutions of dynamic problems for incompressible and slightly compressible helically orthotropic non-uniform thick-walled cylinders

Exact analytic solutions are obtained of the one-dimensional dynamic problem for an incompressible elastic radially non-uniform helically orthotropic thick-walled cylinder under plane-strain conditions, loaded with a time-dependent pressure from inside and/or outside. The necessary and sufficient conditions for solutions to exist and to be unique are established. The convergence of the wave solutions for slightly compressible cylinders to the analytic relations obtained for incompressible cylinders is investigated.     

Preparation and characterization of carbon xerogel (CX) and CX–SiO composite as anode material for lithium-ion battery

Carbon xerogel (CX), a kind of novel carbon material with low-density and continuous nano-porous structure that can be controlled and tailored on nanometer scale, has been prepared through the sol–gel polycondensation of resorcinol (R) with formaldehyde (F) followed by drying at ambient pressure and carbonization in inert atmosphere, and CX–SiO composite has been synthesized by high energy mechanical ball-milling of the obtained CX and commercial SiO at room temperature and atmosphere. The characteristics of CX and CX–SiO as anode material for lithium-ion battery have been systematically investigated on basis of field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), electrochemical and charge–discharge tests. The results showed that, CX–SiO is composed of active carbon, graphite, SiO and dispersed Si crystal while CX consists of active carbon and graphite, CX–SiO has smaller and much more uniform particles than CX. SiO can greatly improve discharge capacity of CX with an acceptable sacrifice of cycling stability, and the charge–discharge capacity of CX–SiO comes mainly from lithium insertion–extraction in Si–SiO in the sample.     

Synthesis of perfluorinated functionalized, branched ethers

We wish to report synthesis of perfluorinated functionalized, branched ethers from their hydrocarbon analogues by direct fluorination. Yields up to 90%, with high purities, have been obtained at ambient temperature and pressure. This technique will likely develop into a new general method for producing perfluorinated, hyperbranched and dendritic polymers.     

Preparation of dye-loaded SiO2 nanoparticles

A room temperature method for the encapsulation of pyrene in SiO₂ nanoparticles is described. The relation between alkoxysilane surfactant chain length, reactant molar ratios and the uptake of dye, sample morphology, photophysical properties, and the ability of the silicate matrix to protect the encapsulated dye was examined. The synthesis can easily be adapted for the encapsulation of other hydrophobic and thermolabile substances, and used in the development of nanostructured optically active coatings, films and monoliths.     

Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Synthesis and characteristics of NiO nanoparticles by thermal decomposition of nickel dimethylglyoximate rods

Arrays of NiO nanoparticles have been synthesized via thermal decomposition of nickel dimethylglyoximate precursor. The structure, morphology and properties of the products were characterized by XRD, TEM, SAED and UV-vis spectrophotometry. TEM reveals that one-dimensional arrays consist of NiO nanoparticles. XRD and SAED indicate that these NiO nanoparticles crystallize with a polycrystalline structure. The optical absorption band gap of NiO nanoparticles is 3.51 eV.