二硫化锡纳米片阻变存储器的制备与性能

采用水热法合成了尺寸为50~100 nm的二硫化锡纳米片,并首次以二硫化锡作为阻变层材料的阻变存储器（Cu/PMMA/SnS₂/Ag,PMMA=聚甲基丙烯酸甲酯）,对其阻变性能进行了研究。结果表明： Cu/PMMA/SnS₂/Ag阻变存储器的开关比约10⁵,耐受性2.7×10³。在上述2项性能指标达到较优水平的同时,开态与关态电压分别仅约为0.28与-0.19 V。     

光阑对偏振高斯-谢尔模型光束偏振特性的影响（英文）

根据广义惠更斯-菲涅尔原理和Collins公式,基于复高斯函数展开法,推导出椭圆偏振的高斯-谢尔模型光束经过矩形光阑衍射后的交叉谱密度公式,结合斯托克斯矢量理论推导了椭圆偏振高斯-谢尔模型光束在接收平面的光强、偏振度、方位角和椭圆度的表达式,数值分析了光阑的孔径遮拦比对光强、偏振度及方位角和椭圆度的影响.结果表明,光阑的孔径遮拦比在近场区对经过光阑后椭圆偏振高斯-谢尔模型光束的光强和偏振特性有显著影响;随着传输距离的增大,光强和偏振特性受孔径遮拦比的影响减小,光强和偏振特性变化平稳.     

Influence of TiO2 impregnated with a novel copper(II) carboxylic porphyrin and its application in photocatalytic degradation of 4-Nitrophenol

A novel 5,15-di-[4-carboxylatomethoxy]phenyl-10,20-diphenylporphyrin, its copper complex and the corresponding metalloporphyrin-TiO₂ photocatalyst were synthesized and characterized by DRS, SEM, XRD, and FT–IR. The photocatalytic effects of anataseTiO₂ impregnated with this copper(II) porphyrin was investigated by photodegradation of 4-nitrophenol(4-NP) in aqueous solution under Xenon lamp irradiation. The results indicated that the photoactivity of copper(II) porphyrin-TiO₂ composite was evidently enhanced by the interaction between carboxyl of the porphyrin molecule and hydroxyls anchored on the TiO₂. Futhermore, the copper(II) carboxylic porphyrin displayed good adsorption behavior and activity of the dye-sensized TiO₂ system.     

无电沉积法AuNPs-MWCNTs的制备及其对黄酮类化合物的电化学催化性能研究

利用多壁碳纳米管具有较低的还原电位,以多壁碳纳米管作为还原剂和负载基底,通过无电沉积法制备了负载纳米金粒子的碳纳米管催化剂。此种材料具有更多的活性位点,避免了纳米金粒子表面保护剂的存在造成其催化活性降低的缺陷,发现其对典型黄酮类化合物-芦丁和黄芩苷具有良好的电化学催化性能和较高的灵敏度,并将其应用于电化学分析检测黄酮类化合物。     

Topomer CoMFA,HQSAR Studies and Molecular Docking of 2,5-Diketopiperazine Derivatives as Oxytocin Inhibitors

Topomer comparative molecular field analysis(Topomer Co MFA) and holographic quantitative structure-activity relationship(HQSAR) for 130 2,5-diketopiperazine derivatives were used to build a three-dimensional quantitative structure-activity relationship(3D-QSAR) model. The results show that the models have high predictive ability. For Topomer CoMFA, the cross-validated q~2 value is 0.710 and the non-cross-validated r~2 value is 0.834. The most effective HQSAR model shows that the cross-validation q~2 value is 0.700, the non-cross-validated r~2 value is 0.815, and the best hologram length value is 353 using connections and bonds as fragment distinctions. 50 highly active 2,5-diketopiperazine derivatives were designed based on the three-dimensional equipotential map and HQSAR color code map. Finally, the molecular docking method was also used to study the interactions of these new molecules by docking the ligands into the diketopiperazine active site, which revealed the likely bioactive conformations. This study showed that there are extensive interactions between the new molecule and Arg156, Arg122 residues in the active site of diketopiperazine. These results provide useful insights for the design of potent of the new 2,5-diketopiperazine derivatives.     

多尺度Ag/CuO复合光热材料的制备及在海水淡化中的应用

采用原位化学反应和热处理相结合的策略,在泡沫铜表面形成丝线状与花瓣状的立体无机物阵列,然后在其表面蒸镀Ag纳米颗粒(NPs),成功制备了基于泡沫铜的Ag/CuO复合光热材料。该复合材料因表面三维立体阵列结构以及Ag NPs而具备较高的太阳光吸收率。故而,Ag/CuO复合光热材料结合三聚氰胺泡沫组成的蒸发器件实现了高效的海水淡化。本研究除了探索光陷阱深度和金属掺杂对吸收体光热转换效率增强之外,还搭建了太阳能驱动界面蒸汽生成测试系统,测试了样品的光热蒸发性能。在1倍太阳(1 kW·m~(-2))辐照下,该器件整体蒸发速率高达1.097 6 kg·m~(-2)·h~(-1),即其蒸发效率可达78.38%。     

分子凝胶:从结构调控到功能应用

作为一类典型软物质材料,近年来分子凝胶在生物医学、柔性电子设备、晶体控制生长、水体净化,以及3D打印材料、微纳米材料和高能量密度材料制备等领域表现出巨大的应用潜力,受到人们越来越多的关注。如何提高分子凝胶结构调控效率,拓展分子凝胶功能,促进分子凝胶实际应用已经成为新阶段分子凝胶研究的主要内容。本文结合本课题组的研究工作,从动态共价键调控分子凝胶力学性能、分子凝胶促进高品质有机晶体制备和高性能多孔高分子材料的分子凝胶(凝胶乳液)软膜板制备三个方面阐述分子凝胶的结构调控和功能化应用研究。在此基础上,简要展望分子凝胶研究的发展趋势。     

In situ Carbon Modification of g-C3N4 from Urea co-Crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light

An in situ strategy was introduced for synthesizing carbon modified graphitic carbon nitride(g-C₃N₄) by using urea/4-aminobenzoic acid(PABA) co-crystal(PABA@Urea) as precursor materials. Via co-calcination of the PABA co-former and the urea in PABA@Urea co-crystals, C guest species were generated and compounded into g-C₃N₄ matrix in situ by replacing the lattice N of the carbon nitride and forming carbon dots onto its layer surface. The carbon modification dramatically enhanced visible-light harvesting and charge carrier separation. Therefore, visible light photo-catalytic oxidation of methylene blue(MB) pollution in water over the carbon modified g-C₃N₄(C/g-C₃N₄) was notably improved. Up to 99% of methylene blue(MB) was eliminated within 60 min by the optimal sample prepared from the PABA@Urea co-crystal with a PABA content of 0.1%(mass ratio), faster than the degradation rate over bare g-C₃N₄. The present study demonstrates a new way to boost up the photocatalysis performance of g-C₃N₄, which holds great potential concerning the degradation of organic dyes from water.     

胶质液体泡沫(CLA)的形成及其稳定性研究

以研究胶质液体泡沫(CLA)内部结构及其特性为最终目的, 对组成为十二烷基醇聚氧乙烯(3)醚(AEO-3)/正癸烷/十二烷基硫酸钠(SDS)/水的CLA体系形成过程和稳定动力学行为进行了电导率测定和光学显微观察. 通过上述两过程的电导率变化探明了CLA的形成和稳定性动力学行为, 并被光学显微照片所证实. 实验结果表明CLA的形成是一个低能量乳化过程, 经历了水相泡沫化→油相替代气泡乳化→CLA形成. 在整个乳化过程中, 没有发生相的转变现象, CLA呈O/W型乳状液. 其稳定性并不遵守一级动力学模型. 在常温下, 其电导率曲线呈直线关系; 当温度超过318.15 K时, 其电导率曲线近似于Langmuir等温线形. 并可用Sigmoidal模型σ_t=(σ₁－σ₂)/[1＋e^(t－t₀)/S] ＋σ₂较好的拟合, 式中, σ_t表示t 时的电导率值(μS/cm); t表示时间(min); σ₁, σ₂分别代表存储过程中电导率最小值和最大值(μS/cm); t₀对应于σ_t等于 1/2(σ₁＋σ₂)的时间t值(min); S描述了电导率曲线陡峭程度(min). 并提出了CLA的破乳过程包括液膜排液和液膜破裂两个阶段, 同时伴随有絮凝过程发生的稳定性机理.