交流源作用下介观RLC电路系统量子态随时间的演化

根据量子不变量理论，同时考虑介观电容器极板间电子波函数的耦合作用和电路的耗散,研究介观RLC电路系统在交流电流源作用下动力学的演化过程，并且得到描述系统量子态随时间的演化算符.进一步的分析结果表明，介观RLC电路系统的波函数将由任意的初态演化到一般的压缩态. 关键词： 介观RLC电路 交变电源 不变量理论 时间演化算符     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

The prediction of the peak width at half height in HPLC

The prediction of the peak width at half height is an important aspect in the optimization of the chromatographic operating conditions. In this paper, a linear relationship, between the peak widths at half height and the retention values with various isocratic elution is observed. In gradient elution, however, the relationship between the peak widths at half height and the so-called invented retention values that correspond to the mobile phase composition by eluting the solute from the column end is developed. We believe that there is almost the same band width at half height inside the column (in unit of length) for different solutes. The peak width at half height in the chromatogram (in unit of time) is mainly determined by the capacity factor of the solute when it is eluted from the column end. The larger the capacity factor of a solute eluted from the column end, the more slowly will be the solute eluted from the column end and the wider will be the peak width at half height. It is possible to predict the peak width at half height in various isocratic and gradient elutions by using this linear relationship.     

市场营销专业课程体系探索

从市场营销专业人才培养目标出发，分析了市场营销专业课程体系的不足，提出了面向21世纪的市场营销专业课程体系的构建思路。     

乙烷—丙烷混合裂解模型及产率预计

本文研究了乙烷和丙烷的混合裂解,并与乙烷、丙烷单独裂解进行了比较。解决了微分方程组的刚性问题,提出了混合裂解反应动力学模型。明确了三种选择性的概念,即;真实选择性、迭加选择性和总选择性,从而澄清了国际上对于选择性有正偏差和负偏差的不同观点。为乙烯生产提供了有效利用乙烷和丙烷的分析评价方法。     

位置参数估计量的损失函数之估计

本文考虑损失函数的估计问题,分别对于球对称分布和均匀分布情形给出了其参数的J-S型估计量的损失之估计,它们满足[1]中提出的条件(Ⅰ)和(Ⅱ).     

钨酸铜的生成及其氢还原过程的研究

本文提出一种生产微细钨铜复合粉的方法。将WO_3(或蓝钨)和CuO均匀混合,在空气中焙烧生成CuWO_4,再在氢气中还原,就能制得微细钨铜复合粉,其钨、铜两相分布均匀,钨颗粒细小且分布狭窄。本文详细地研究了钨酸铜的生成及其氢还原过程,与WO_3相比,发现两者的还原相变过程及动力学过程有某些差异。