Multiplicity of solutions for a class of Kirchhoff type problems

In this paper we apply the （variant） fountain theorems to study the symmetric nonlinear Kirch- hoff nonlocal problems. Under the Ambrosetti-Rabinowitz＇s 4-superlinearity condition, or no Ambrosetti- Rabinowitz＇s 4-superlinearity condition, we present two results of existence of infinitely many large energy solutions, respectively.     

Rheological Behaviors of Poly(Vinylidene Fluoride)/“Bud-Branched” Nanotubes Nanocomposites

Bud-branched nanotubes, fabricated by growing metal particles on the surfaces of multiwall carbon nanotubes (MWCNTs), were used to prepare poly(vinylidene fluoride) (PVDF)-based nanocomposites. The melt viscoelastic behaviors of PVDF and its nanocomposites were characterized. The results showed that the introduction of both the MWCNTs and bud-branched nanotubes (MWCNTs-B) increased the storage modulus, loss modulus, and complex viscosity of the nanocomposites. However, the bud-branched nanotubes were more efficient to increase the elasticity than the MWCNTs that have relatively smooth surfaces. In particular, it was observed that the bud-branched nanotubes caused an increase of normal force and crossover modulus, while for MWCNTs, no variation in the normal force and a decrease of the crossover modulus were observed.     

中国散裂中子源快循环同步加速器主准直器的设计与研究

为满足强流加速器对准直器高散热性能、高抗辐射性能、超高真空、高定位精度、高稳定性和在线实时调整等特殊要求,在CSNS/RCS主准直器设计时针对结构方案和控制方案进行了详细设计和研究,针对关键部件:刮束器、真空盒、驱动装置和远程快速拆卸装置等设计难点进行了阐述,在设计中使用ANSYS完成了刮束器的热分析及支架强度和变形校核,用FLUKA程序对辐射屏蔽进行了分析和设计,确保主准直器设计的可靠性。     

簇间连接方式不同的簇网络的同步过程研究

本文对簇间连接方式不同的三类簇网络的同步能力和同步过程进行研究. 构成簇网络的两个子网均为BA无标度网络, 当簇间连接方式是双向耦合时, 称其为TWD网络模型, 当簇间连接是大子网驱动小子网时, 称其为BDS网络模型, 当簇间连接是小子网驱动大子网时, 称其为SDB网络模型. 研究表明, 当小子网和大子网节点数目的比值大于某一临界值时, TWD网络模型的同步能力大于BDS网络模型的同步能力, 当该比值小于某一临界值时, TWD网络模型的同步能力小于BDS网络模型的同步能力, SDB网络模型的同步能力是三种网络结构中最差的. 对于簇间连接具有方向性的单向驱动网络, 簇网络的整体同步能力与被驱动子网的节点数和簇间连接数有关, 与驱动网络自身节点数无关. 增加簇间连接数在开始时会降低各子网的同步速度, 但最终各子网到达完全同步的时间减少, 网络的整体同步能力增强. 文中以Kuramoto相振子作为网络节点, 研究了不同情况下三种簇网络的同步过程, 证明了所得结论的正确性. 关键词： 簇网络 有向连接 同步能力 Kuramoto振子     

一种双光梳多外差大尺寸高精度绝对测距新方法的理论分析

本文提出了一种双光梳多外差大尺寸高精度绝对测距的新方法, 结合基于双光梳互相关的多外差距离测量和基于重复频率的梳间拍频距离测量, 在不需要依靠脉冲飞行时间先验判断以及扫描重复频率或扫描参考光路的前提下实现km量程高精度绝对测距. 文章在光梳基本原理和测距方案的基础上, 建立了基于双光梳的大尺寸距离测量链理论模型, 讨论了多外差最低谱线和光梳重复频率稳定度对测量结果的影响, 并进行了大量仿真计算; 仿真结果表明, 在理想相位解调精度的前提下, 该方法的测距误差优于± 50 pm, 且多外差最低谱线的频率偏差对测距造成的影响远低于多外差测量的测距分辨力, 验证了该方法能够用于开展大尺寸高精度绝对测距研究. 关键词： 激光测距 飞秒光梳 重复频率 多外差干涉     

丙烯腈-尿素包合物的形成过程及特征

利用差示扫描量热法(DSC)和X射线衍射(XRD)研究了在不同丙烯腈/尿素投料比情况下的丙烯腈-尿素包合物的形成过程和组成. 实验结果表明DSC是一种研究包合物的客主比及分解热的有效方法. 测定了丙烯腈-尿素包合物的客主比和分解热分别为1.17和5361.53 J/mol. 同时发现丙烯腈-尿素包合物的形成依赖于冷冻时间,在足够长的冷冻时间之后丙烯腈-尿素包合物的组成达到稳定状态. 实验结果表明,丙烯腈分子可能是采用堆叠的方式排布在尿素晶道结构中. XRD结果表明只要丙烯腈分子进入尿素晶格中,丙烯腈-尿素包合物的结构便形成了,并且这种结构与形成过程终了时的结构是一致的. 只要丙烯腈是足量的,包合物中的丙烯腈分子排列会随冷冻时间的延长而增长,直到尿素的晶道结构被丙烯腈分子填满.     

Photo‐controlled Hierarchical Assembly and Fusion of Coumarin‐containing Polydiacetylene Vesicles

Herein, we synthesize a coumarin‐substituted diacetylene monomer (CODA) and report the novel photo‐controlled reversible assembly and disassembly behavior of the polymerized CODA (PCODA) vesicles. The photo‐triggered dimerization and cleavage reactions of the coumarin groups within the surface of the adjacent PCODA vesicles can be utilized as the driving force to induce assembly and disassembly of PCODA vesicles. Moreover, the boundary of PCODA vesicles in the aggregates becomes more obscure when the irradiation time exceeds 30 min. Fusion occurs upon close docking of target membranes, driven by sufficient dimerization of the coumarin groups within the surface of PCODA vesicles.     

Preparation of Poly (L-lactic Acid) Microsphere

Poly (L-lactic acid) (PLLA) microspheres were prepared by a solvent evaporation method based on an oil/water emulsion. The effect of the mass ratio of PLLA and poly(vinyl alcohol) (PVA) on the formation of the microspheres was discussed, and the influence of extraction speed of dichloromethane on the microsphere morphology was also studied. Moreover, the influences of the PLLA concentration and the volume ratio of water phase to dichloromethane phase were investigated. The results showed that stable microspheres can be obtained under the conditions that the mass ratio of PLLA to PVA is 20:1. Porous microspheres were obtained under faster evaporating speed of dichloromethane. The microsphere size increased with increasing PLLA concentration. The microsphere size also increased with the increase of the volume ratio of water phase to dichloromethane phase.     

Stretch-Induced Shish-Kebabs in Rubbery Poly(L-Lactide)

The oriented crystallization in stretched rubbery poly(L-lactide) has been studied with the aid of in-situ rheo-Fourier transform infrared spectroscopy (FTIR) measurements and morphological observations. The oriented segments that survived after stretching are first transformed into shish structure composed of helical sequences via intra-chain conformational ordering and propagation, followed by the transverse growth of kebabs from the coiled chains in the surrounding matrix. Moreover, the formation of shish structure and kebabs shows different dependences on the stretching temperature as a result of different controlling molecular processes.