REM树脂的制备及亲核加成应用研究

用Mitsunobu反应及丙烯酰氯酰化反应制备了用于固相有机合成的载体REM树脂，将REM树脂与苄胺加成，考查了所合成REM树脂的反应性能，并通过元素分析测定氮含量，推出REM树脂的烯丙基固载量。利用所合成的REM树脂进行了与胺、酚的加成反应动力学研究。结果表明，REM树脂与脂肪族伯胺和促胺的加成反应能够进行，与苯胺不发生反应；REM树脂与酚不能发生亲核加成反应。     

About the focal mechanism of Friuli earthquake occurred on May 6, 1976

Summary We are going to present the focal-mechanism solution of Fruili earthquake occurred on May 6, 1976, as it results from the analysis, on original seismograms, of the polarities of initial longitudinal waves obtained in 92 seismic stations. The polarities so obtained have been reported on the projection which represents the surface of the Earth and the solution has been drawn, directly, from the study of the resulting distribution, by establishing through Gr?fe's theory the two couples of forces considered as the sources of the seism at the focus. At last, a comparison has been carried out with the solution already obtained by other authors.

---

Riassunto Si presenta la soluzione del meccanismo focale del terremoto del Fruili del 6/5/1976 ottenuta dallo studio, sui sismogrammi originali, della polarità delle onde longitudinali iniziali, quale si è presentata in 92 stazioni sismiche vicine e lontane. Le polarità ottenute sono state riportate sulla superficie della Terra e la soluzione è stata ricavata direttamente dallo studio della distribuzione così ottenuta, definendo mediante la teoria di Gr?fe le due coppie di forze che hanno agito all'ipocentro. Un confronto è stato infine eseguito con le soluzioni in precedenza ottenute da altri autori.

---

Резюме Предлагается решение фокального механизма землетрясения, имевшего место в Фриули 6 мая 1976 г. Решение есть результат анализа исходных сейсмограмм, которые получены на 92 сейсмнческих, удаленнынных и близких. Полученные пояьрности представлены в проекции на поверхность Земли. Решение получено непосредственно из исследования результируюшего распределения, которое следует из теории Грефа для для двух пар сил, представляюших источники землетрясения в фокусе. В заключение проводится сравнение с решением, полученным ранее другими авторами.

     

基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．     

基于扩散势能和自由体积的自扩散系数模型

在考虑自由体积和局部临界扩散势能的基础上,提出一种新的计算自扩散系数模型,并给出新模型中各个因子物理含义．同时还提出一种计算局部临界扩散势能的新方法,并应用于新模型．另外将衍生van der Waals状态方程应用于求解自由体积,式中所需径向分布函数由Morsali-Goharshadi方程得到．在相同条件下,新模型比原自由体积模型更准确．     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.     

退火温度对低温生长MgxZn1－xO薄膜光学性质的影响

用射频磁控溅射法在80℃衬底温度下制备出Mg_xZn_1-xO(x=0.16)薄膜，用X射线衍射(XRD)、光致发光(PL)和透射谱研究了退火温度对Mg_xZn_1-xO薄膜结构和光学性质的影响.测量结果显示，Mg_xZn_1-xO薄膜为单相六角纤锌矿结构，并且具有沿c轴的择优取向；随着退火温度的升高，(002)XRD峰强度、平均晶粒尺寸和紫外PL峰强度增大，(002)XRD峰半高宽(F 关键词： xZn_1-xO薄膜')" href="#">Mg_xZn_1-xO薄膜 射频磁控溅射 退火     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.