Use of zwitterionic buffer additives to improve the separation of proteins in capillary zone electrophoresis

In CZE, the adsorption of the proteins on the capillary wall is a common problem. This paper describes the simple method of utilizing zwitterionic buffer additives to improve the separation of proteins in untreated fused silica capillaries at neutral pH. Three kinds of zwitterion are evaluated in the separation of acidic, neutral, and basic proteins, including their effect on protein efficiency, mobility, separation, and resolution; the difference between the effects of the different additives are also highlighted. The method has proved to be a possible means of reducing protein adsorption, especially for basic proteins.     

三氮烯类化合物作为酸碱指示剂的研究及应用

本文报道了三氮烯类化合物作为酸碱指示剂的研究及应用.以我们新近合成的此类试剂之一——2-氯一4一硝基苯基重氮氨基偶氮苯为研究主要对象,分别讨论了有无表面活性剂存在、以及不同类型表面活性剂存在下,试剂的离解常数及变色区域.在TritonX-100存在下,其试剂的pKa=9.25±0.01,变色区域为pH8.40(黄)～10.0(紫);在CTMAB存在下,pKa=7.35士0.03,变色区域pH6.85～7.90;在混合表面活性剂TritonX-100-CTMAB存在下,pKa=8.20±0.05,变色域pH7.45～9.00(黄～紫).特别是在阳离子表面活性剂存在下,滴定终点颜色变化十分敏锐清晰,是一种优于酚酞和甲基橙的指示剂.最后并对此类试剂与表面活性剂的相互作用作了简单探讨.     

冶炼工业废气中SO_2的脱除研究

研究用软锰矿的水悬浮液脱除冶炼工业废气中SO_2的工艺可行性,提出抑制副产物MnS_2O_6生成的途径。     

THE INFLUENCE OF SPINNING CONDITION ON STRUCTURE & PROPERTIES OF MASS-DYED SUPERFINE PP AS-SPUN FILAMENTS

The effect of colorant additive on the rheology of PP polymer melt and the influence of spinning conditions on the crystalline and orientation structure of mass-dyed as-spun PP filament are reported. The △E~~~ value for all colored chips is higher than that of blank chip to a varying degree. The crystallinity and orientation degree of dyed PP as-spun filament decrease with increasing melt temperature, decreasing spinning speed and increasing denier per filament (dpf), while the crystallinity of dyed as-spun filament increases with the content of colorant additive as a nucleation agent.     

结构稳定性在非线性系统鲁棒性分析中的应用

探讨了非线性系统的结构稳定性、分叉点和鲁棒性之间的关系，提出了一种分析非线性系统鲁棒稳定性的方法，并给出了相应的计算实例．     

An experimental and computational investigation of crack initiation and stable crack growth of ductile materials

Crack initiation and stable crack growth under monotonic loading in steels has been studied using an elastic-plastic finite element analysis. The fracture criterion used for crack initiation and stable crack growth was the critical strain energy density. In addition the shift core method for the analysis of crack extension was used. In the shift core modelling method, crack advance is simulated by moving the coordinates of the core region which surrounds the crack tip, to obtain the stiffness reduction. Simultaneously the core itself geometrically undergoes a simple rigid-body motion or translation during the crack extension. The analytically calculated and experimentally measured load for crack initiation and the subsequent stable crack growth agreed well.     

整体优化 提高高校学报质量

本文从学报形成的全过程入手,分析了影响学报质量的诸因素,提出了人与科学技术相结合;编者与作者相结合;编者与读者需要相结合;办刊与高校教育相结合来提高学报质量的观点,使学报在信息传播的全过程中实现整体优化。     

条件泛函及其导数非参数估计的强一致收敛速度

研究了条件泛函及其导数的非参数估计,对随机与固定设计的条件泛函,分别利用核估计和非参数加权估计,在核函数及权函数满足一定条件下,证明了估计一致强收敛于待估函数的速度可达到最优。从而进一步推广和发展了Hrdle,etal.(1988)、Severini,etal.(1992)的许多结果。     

C~k连续的保形分段2k次多项式插值

1．引言在每个子区间上，通过插入至多一个内结点，Brodlie和Butt［1］给出了分段三次多项式保形插值算法，Randal［2］等讨论了分段五次多项式插值，作者［31讨论了一般分段奇次多项式的保形插值，并且给1了内结点的位置范围公式．这种插值方法完全解决了一般的分段奇次多项式的保形插值问题．关于分段偶次多项式的保形插值，大多数文献只讨论分段二次保形插值，这里要特别指出的是Shumake［4j导出了二次样条保凸的充要条件，并且给出了一个二次样条保形插值的方法．在每一个子区间上至多插入一个内结点，则一个二次插值样条就可得到．作…