Characterization of Nested Hollow Inorganic Fullerene-like Tungsten Disulfide Nanoparticles Prepared by Solid-Gas Reaction

Non-carbon inorganic fullerene-like(IF) nanoscale materials have recently attracted intense interest due to their nested hollow and nanotube structures,In this letter,IF-WS2 nanoparticles prepared by solid-gas reaction were characterized by X-ray diffraction,Scanning electron microscopy and transmission electron microscopy.The results show that the IF-WS2 nanoparticles have a nested hollow closed spherical structure with diameter of 100-150mm.     

Theoretical Studies on the Abstraction Reaction of Atomic O（^3p） with Si2H6

The hydrogen abstraction reaction of O(^3P) with Si2H6 has been studied theoretially. Two transition states of ^3A″ and ^3A′ symmetries have been located for this abstraction reaction. Geometries have been optimized at the UMP2 leve with 6-311G (d) basis set. G3MP2 has been used for the final single-point energy calculation. The rate constants have been calculated over a wide temperature range of 200-3000K using canonical variational transition-state sheory (CVT) with small curvature tunneling effect(SCT). The calculated CVT/SCT rate constants match well with the experimental value.     

Enantiomer separations by nonaqueous capillary electrophoresis using octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin

The newest member of the single-isomer isomer sulfated cyclodextrin family, octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gamma-CD) was used for the first time as a resolving agent for the nonaqueous capillary electrophoretic separation of the enantiomers of 26 weak base pharmaceuticals in an acidic methanol background electrolyte. The solubility limit of ODAS-gamma-CD at room temperature proved to be 55 mM in this background electrolyte, which afforded good, fast enantiomer separations for most of the basic drugs tested. For all the bases studied, the effective mobilities and separation selectivities were found to follow the predictions of the charged resolving agent migration model of electrophoretic enantiomer separations. The effective mobilities of the weakly binding weak bases remained cationic throughout the entire 0 to 45 mM ODAS-gamma-CD concentration range; separation selectivities increased as the ODAS-gamma-CD concentration was increased. The effective mobilities of the moderately binding weak bases became anionic in the 2.5 to 45 mM ODAS-gamma-CD concentration range; separation selectivities first increased as the effective mobilities approached zero, then decreased again as the ODAS-gamma-CD concentration was increased further. The effective mobilities of the strongly binding weak bases became anionic in the 0 to 2.5 mM ODAS-gamma-CD concentration range; separation selectivities decreased as the ODAS-gamma-CD concentration was increased above 2.5 mM.     

Organic/inorganic hybrid vesicles based on a reactive block copolymer

Presented in this communication is a novel hybrid vesicle with a cross-linked polyorganosiloxane wall based on a new reactive block copolymer, poly(ethylene oxide)-block-poly(3-(trimethoxysilyl)propyl methacrylate) (PEO-b-PTMSPMA), which was synthesized by atom transfer radical polymerization. The vesicles were prepared first by self-assembly of the block copolymer in a selective solvent, and then the PTMSPMA block was subjected to hydrolysis and polycondensation reaction to fix vesicle wall in the presence of triethylamine as a catalyst. Transmission electron microscopy, scanning electron microscopy, NMR, and light scattering have been used to characterize the vesicles.     

用硼酸作催化剂一锅法合成双（二氢化嘧啶酮-4-基）苯

A simple effective synthesis of bis(dihydropyrimidinone-4-yl)benzene derivatives, using boric acid as catalyst,from isophthalic aldehyde or terephthalic aldehyde, 1,3-dicarbonyl compounds and urea or thiourea in glacial acetic acid was described. As the expansion of the classical Biginelli reaction, this method has the advantage of excellent yields 83%-94% and short reaction time 0.5-1.5 h.     

A novel mimetic enzymatic fluorescence immunoassay for hepatitis B surface antigen by using a thermal phase separating polymer

Iron tetrasulfonatophthalocyanine (FeTSPc), a peroxidase mimic, was used as a labeling reagent and poly(N-isopropylacrylamide) (PNIP) as the separation support of the immune complex for the mimetic-enzymatic immunoassay of hepatitis B surface antigen (HBsAg). PNIP was precipitated from aqueous solution when the ambient temperature was higher than its lower critical solution temperature of 31 degrees C. In a sandwich immunoassay, the antigen (HBsAg) first reacted with mouse anti-human HBsAg antibody immobilized on PNIP (PNIP-antibody) and then further reacted with FeTSPc-labeled mouse anti-HBsAg antibody (antibody-FeTSPc) at room temperature in a homogeneous format. After changing the temperature to separate the PNIP-antibody-HBsAg-antibody-FeTSPc conjugate moiety, it was re-dissolved and determined by coupling with the fluorogenic reaction of hydrogen peroxide and p-hydroxyphenylpropionic acid. The sensitivity of this method (3 ng mL-1) was close to that of the traditional ELISA using the same reactants. However, the assay was much faster (the assay time decreased from 100-120 to 45 min). This method was applied to determine HBsAg in human serum with satisfactory results.     

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).     

SiH2Cl2: ab initio anharmonic force field, dipole moments, and infrared vibrational transitions

The vibrational spectra of SiH2Cl2 have been recorded in the 1000-13,000 cm(-1) region, utilizing the Fourier-transform spectroscopy and Fourier-transform intracavity laser absorption spectroscopy. Totally 61 band centers and intensities are derived from the infrared spectra. An ab initio quartic force field is obtained by applying the second-order Moller-Plesset perturbation theory and correlation-consistent polarized valence triplet-zeta basis sets [J. Chem. Phys. 90, 1007 (1989); 98, 1358 (1993)]. Most observed bands are assigned by the vibration analysis based on the second-order perturbation theory. Reduced-dimensional ab initio dipole moment functions (two dimensional and three dimensional) have also been calculated to investigate the absolute band intensities of the SiH2 chromophore. The calculated values agree reasonably with the observed ones.     

Theoretical studies on vibrational spectra of some halides of Group IIB elements

The vibrational spectra of Group IIB elements halides MX2 and their dimers M2X4 (M=Zn(II), Cd(II) and Hg(II); X=F, Cl, Br and I) have been systematically investigated by ab initio RHF and B3LYP methods with LanL2MB, LanL2DZ and SDD basis sets. The optimized geometries, calculated vibrational frequencies are evaluated via comparison with the experimental data. The vibrational frequencies, calculated by these methods with different basis sets, are compared to each other too. The best results can be obtained by RHF/SDD method, with this method, the deviations for MX2 and Hg2X4 are <7%. Some vibrational frequencies of M2X4 that have not been experimentally reported are also predicted.     

Filter-based microfluidic device as a platform for immunofluorescent assay of microbial cells

A filter-based microfluidic device was combined with immunofluorescent labeling as a platform to rapidly detect microbial cells. The coin-sized device consisted of micro-chambers, micro-channels and filter weirs (gap = 1-2 microm), and was demonstrated to effectively trap and concentrate microbial cells (i.e., Cryptosporidium parvum and Giardia lamblia), which were larger in size than the weir gap. After sample injection, a staining solution containing fluorescently-labeled antibodies was continuously provided into the device (flow rate = 20 microl min(-1)) to flush the microbial cells toward the weirs and to accelerate the fluorescent labeling reaction. Using a staining solution that was 10 to 100 times more dilute than the recommended concentration used in a conventional glass method, those target cells with a fluorescent signal-to-noise ratio of 12 could be microscopically observed at single-cell level within 2 to 5 min prior to secondary washing.