膨胀的热夸克胶子物质的中等质量双轻子的增强

基于一个描述夸克胶子火柱演化的相对论流体力学模型,研究了夸克相、强子相互作用以及非热过程(DrellYan对、粲强子衰变)的中等质量双轻子的产生.发现由于相边对夸克胶子物质演化的影响和RHIC能量核碰撞产生的夸克胶子物质具有高的初始温度,夸克相对双轻子的贡献显著增强,比那些来自强子相互作用的贡献重要,甚至能与来自非热的贡献比较.表明中等质量双轻子的增强是一个在核碰撞中产生了夸克胶子物质的可能信号. 关键词： 夸克-胶子物质 双轻子增强 相对论流体力学模型     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

Electrochemical studies of glutathione monolayer assembled on a polycrystalline gold electrode

The glutathione (GSH) monolayer and complex monolayer of GSH-metallic ion on polycrystalline gold electrode were studied by using K₃Fe(CN)₆ as the redox probe. As for the GSH monolayer, it was found that the metallic ions could open the ion-gate in the monolayer dramatically in the order La³⁺> Pb²⁺>>Ba²⁺>Ca²⁺ whereas Zn²⁺ ion closed the ion-gate. The complexes of GSH-metallic ions were capable of self-assembling the different kind of monolayer. All the differences were related to the structural configuration of the anchored GSH molecule, which changed with different metallic ions or pH. Biography:Fang Cheng (1971-) male, Ph. D, research direction: electroanlysis.     

无K1,r图中的哈密顿圈（英文）

本文借助对图的本质独立集和图的部分平方图的独立集的研究，对于K1,r图中哈密顿圈的存在性给出了八个充分条件。我们将利用T－插点技术对这八个充分条件给出统一的证明，本文的结果从本质上改进了C－Q.Zhang于1988年利用次形条件给出的k-连通无爪图是哈密顿图的次型充分条件，同时。G.Chen和R.H.Schelp在1995年利用次型条件给出的关于k-连通无K1，4图是哈密顿图的充分条件也被我们的结果改进并推广到无K1,r图。     

Adhesion measurement of thin films by a modified laser spallation technique: theoretical analysis and experimental investigation

Laser driven shocks can lead to a dynamic failure, called film spallation. Here, we use a modified laser spallation set-up to measure the dynamic adhesion of thin films and we propose a novel diagnostic technology. Based on correlation theory, new spallation criteria for characterizing the progressive damage at the interface between the film and the substrate are established, such as interface delamination, film spallation and film expulsion. With the help of the theory, the degree of damage and the dimension of damage (i.e. fracture), such as the minimum width of delamination radius, the thickness of the film etc., are estimated. Experiments are carried out on epoxy/stainless steel and epoxy/Al, and the experimental results show that their dynamic bonding strengths are about 25 MPa and 20 MPa, respectively. The detailed results, analyses and discussions are presented in this paper. Received: 6 February 2001 / Accepted: 3 December 2001 / Published online: 11 February 2002     

Engineering issue study of triple harmonic method for in situ flying height analysis

In situ flying height testing technology is becoming more and more important in slider–disk interaction analysis and manufacturing quality control of disk drives and head-related components. Triple harmonic method is a quite promising choice for in situ flying height analysis, compared with other in situ methods reported up to now. This paper reports results of investigations on engineering issues of applying triple harmonic method for in situ flying height analysis. The paper reports results of analysis on the effects of various testing conditions on flying height testing repeatability and accuracy. Results suggest that working at reasonable high channel density and working on the ratio between third and first harmonics will be an advantage in terms of both flying height testing sensitivity and testing repeatability. Comparing with media thickness effect, the gap-length variation among different heads will be important if it is to study flying height difference among different heads and the testing is at high channel density. Also, it is suggested to work at AC erased track, in order to reduce the non-linearity caused by hard transition.     

接触载荷作用下的表面裂纹分析

用边界积分方法分析了表面裂纹在接触载荷作用下的张开位移和应力强度因子，该方法将埋在无穷大弹性介质中裂纹模拟为连续分布的位错环，根据两个位错环之间的相互作用能可以得到弹性体的应变能，对弹性体的势能取极值，可以得到关于裂纹张开位移的边界积分方程，通过把半空间的边界模拟成一个包含在无穷大弹性介质中大裂纹，该方法能用已有的边界积分方法很好的处理具有任意表面形状的表面裂纹，文中算例分析了不同倾角的表面裂纹在法向和切向接触载荷作用下，裂纹尖端的应力强度因子，其结果对于分析路面表面裂纹的扩展具有重要意义。     

新型金属杂冠醚配合物18-MC-6[Mn6(4-Amashz)6(DMF)6]·12DMF的合成

合成了一种新型金属杂冠醚配合物[Mn6(4-amashz)6(DMF)6]·12DMF,并用X射线衍射法对其结构进行了表征.研究了该化合物修饰金电极催化氧还原的性质,结果表明,该化合物具有平面碟状结构,对在碱性溶液中的氧有显著的催化还原作用.     

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Chitosan/magnetite nanocomposite was synthesized induced by magnetic field via in situ hybridization in ambient condition. Results of XRD patterns and TEM micrographs indicated that magnetite particles with 10–20 nm were dispersed in chitosan homogeneously. An interesting result is that magnetite nanoparticles were assembled to form chain-like structures under the influence of the external magnetic field, which mimics the magnetite chains inside of magnetotatic bacteria. The saturated magnetization (Ms) of nano-magnetite in chitosan was 50.54 emu/g, which is as high as 54% of bulk magnetite. The remanence (Mr) and coercivity (Hc) were 4 emu/g and14.8 Oe, respectively, which indicated that magnetite nanoparticles were superparamagnetic. The key of route is that a pre-precipitated chitosan hydrogel membrane, used as chemical reactor, which controlled the precipitation of chitosan precipitation and in situ transformation of magnetite from the precursor simultaneously in the magnetic field environment.     

从一道力学综合题谈物理情景的建构

系统如图1所示，滑轮与绳的质量忽略，绳不可伸长．设系统所有的部位都没有摩擦，物体B借助导轨（图中未画出来）被限定在沿物体C的右侧面运动，试求物体C的运动加速度。