微分吸收法测量二极管电压

给出了微分吸收法测量二极管电压的基本原理和实验结果。利用MCNP程序对轫致辐射-衰减-探测器系统建模,模拟得到了输出剂量与二极管工作电压关系拟合曲线。建立了微分吸收法测量二极管电压测量系统,通过在探测器前端放置不同厚度的吸收片,得到了衰减程度不同的波形。结合理论计算的拟合曲线和实验波形,利用迭代法计算得到了晨光号加速器二极管电压,电压峰值为0.58 MV。和传统方法所测得二极管工作电压进行了比较,结果较为一致。     

飞秒激光在晶体中传输的级联非线性过程

系统地回顾了有关级联过程导致的各种非线性效应的工作,指出了级联效应可导致不同光谱成分间出现能量转移现象,且二阶级联过程中产生的白光还能够提供种子光进而得到基于参量放大过程的宽带锥形辐射。在此基础上,进一步研究了入射的基频波长对于超连续白光能量转移效果及产生倍频效率的影响以及二阶级联过程引起的偏振调制现象,指出当入射波长越靠近相位匹配波长时倍频效率越高,发现二阶级联效应还可以引起显著的基频光偏振调制。     

Irreversibility of a quantum walk induced by controllable decoherence employing random unitary operations

Quantum walk is different from random walk in reversibility and interference. Observation of the reduced re- versibility in a realistic quantum walk is of scientific interest in understanding the unique quantum behavior. We propose an idea to experimentally investigate the decoherence-induced irreversibility of quantum walks with trapped ions in phase space via the average fidelity decay. By introducing two controllable decoherence sources, i.e., the phase damping channel (i.e., dephasing) and the high temperature amplitude reservoir (i.e., dissipation), in the intervals between the steps of quantum walk, we find that the high temperature amplitude reservoir shows more detrimental effects than the phase damping channel on quantum walks. Our study also shows that the average fidelity decay works better than the position variance for characterizing the transition from quantum walks to random walk. Experimental feasibility to monitor the irreversibility is justified using currently available techniques.     

Radiation characteristics and implosion dynamics of tungsten wire array Z-pinches on the YANG accelerator

We investigated the radiation characteristics and implosion dynamics of low-wire-number cylindrical tungsten wire array Z-pinches on the YANG accelerator with a peak current 0.8-1.1 MA and a rising time ～ 90 ns.The arrays are made up of(8-32)×5 μm wires 6/10 mm in diameter and 15 mm in height.The highest X-ray power obtained in the experiments was about 0.37 TW with the total radiation energy ～ 13 kJ and the energy conversion efficiency ～ 9%(24×5 μm wires,6 mm in diameter).Most of the X-ray emissions from tungsten Z-pinch plasmas were distributed in the spectral band of 100-600 eV,peaked at 250 and 375 eV.The dominant wavelengths of the wire ablation and the magneto-Rayleigh-Taylor instability were found and analyzed through measuring the time-gated self-emission and laser interferometric images.Through analyzing the implosion trajectories obtained by an optical streak camera,the run-in velocities of the Z-pinch plasmas at the end of the implosion phase were determined to be about(1.3-2.1)×10 7 cm/s.     

ZnO nanorod arrays with tunable size and field emission properties on an ITO substrate achieved by an electrodeposition method

In the present work,vertically aligned ZnO nanorod arrays with tunable size are successfully synthesized on nonseeded ITO glass substrates by a simple electrodeposition method.The effect of growth conditions on the phase,morphology,and orientation of the products are studied in detail by X-ray diffraction(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).It is observed that the as-prepared nanostructures exhibit a preferred orientation along c axis,and the size and density of the ZnO nanorod can be controlled by changing the concentration of ZnCl2.Field emission properties of the as-synthesized samples with different diameters are also studied,and the results show that the nanorod arrays with a smaller diameter and appropriate rod density exhibit better emission properties.The ZnO nanorod arrays show a potential application in field emitters.     

Defect properties of CuCrO2: A density functional theory calculation

Using the first-principles methods,we study the formation energetics properties of intrinsic defects,and the charge doping properties of extrinsic defects in transparent conducting oxides CuCrO2.Intrinsic defects,some typical acceptortype,and donor-type extrinsic defects in their relevant charge state are considered.By systematically calculating the formation energies and transition energy,the results of calculation show that,V Cu,O i,and O Cu are the relevant intrinsic defects in CuCrO2 ;among these intrinsic defects,V Cu is the most efficient acceptor in CuCrO2.It is found that all the donor-type extrinsic defects have difficulty in inducing n-conductivity in CuCrO2 because of their deep transition energy level.For all the acceptor-type extrinsic defects,substituting Mg for Cr is the most prominent doping acceptor with relative shallow transition energy levels in CuCrO2.Our calculation results are expected to be a guide for preparing promising n-type and p-type materials in CuCrO2.     

节能灯用BaMgAl10O17:Eu2+,Mn2+荧光粉的劣化机理研究

对节能灯用BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺荧光粉的热劣化和紫外辐照劣化机理进行了对比研究. 发现热处理和紫外辐照处理均对BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺产生明显的发光劣化作用. 研究结果表明：热劣化主要涉及到Eu²⁺ 的氧化及其格位偏移, 而紫外辐照劣化与上述过程无关. 紫外辐照劣化主要源自高能紫外辐照使Eu²⁺ 处于更加不稳定的状态, 从而降低Eu²⁺ 的直接吸收和发射强度.     

相移吸收二元性算法用于X射线混合衬度定量显微CT的可行性研究

本文采用相移吸收二元性(PAD)相位恢复算法来实现混合 衬度样品内部不同密度组分的定量成像, 采用数字模拟和实验研究验证该方法的可行性. 模拟结果表明, 对于三种不同材料其重构误差均小于1%, 且误差值随材料折射率的增大而减小. 利用上海光源X射线成像线站开展了实验研究, 结果表明用单距PAD相位恢复算法可获取样品的定量信息. 与模拟结果相比, 实验中的重构精度相对较低, 环状伪影可能是影响精度的主要原因. 模拟和实验研究过程中, 均只采用了一组单距投影数据. 可以认为, 相移吸收二元性算法可用于混合衬度样品的定量信息分析研究. 由于剂量相对较低, 应可适合于软组织和骨骼同时存在时生物医学样品的定量相衬CT研究.     

激光驱动气库靶对铝的准等熵压缩实验研究

利用激光驱动气库材料形成的等离子体射流对材料进行斜波加载, 可以获得高应变率的准等熵压缩. 在神光III 原型高功率激光装置上开展了激光驱动铝材料的准等熵压缩实验, 成像型速度干涉仪VISAR记录到样品自由面连续、光滑的速度历史, 采用反积分法得到60 GPa以上的峰值压强, 加载上升沿约10 ns,应变率可达10⁸ s ^-1, 并且观察到了压缩波在样品后表面的反射效应.     

第一性原理研究bct-C4碳材料的强度性质

本文采用第一性原理方法,分析了bct-C4碳材料的力学性质,尤其是抗压强度性质,并在研究中分析了在压缩过程中bct-C4碳的 键长随压缩应变的变化规律.计算结果表明, bct-C4碳材料不仅具有优秀的弹性性质和硬度性质,也具有优秀的强度特性, 其沿[100]晶向的抗压强度高于金刚石6.9%.本文的工作表明, bct-C4碳是一种高强度的碳同素异形体, 可以用于压缩包括金刚石在内的各种物质,并可用于研究物质在高压下的结构变化以及力、电学等性质. 同时,作为一范例,本文研究同样可以为寻找力学性质超越金刚石的物质提供参照.