基团的电子效应与单取代苯对位^1H,^13C的化学位移

基团的电子效应与单取代苯对位１Ｈ、１３Ｃ的化学位移＊韩长日冯娇杨钟照平（海南师范学院化学系海口５７１１５８）关键词１Ｈ的化学位移１３Ｃ的化学位移基团电负性共轭效应引言在１Ｈ、１３Ｃ核磁共振谱中，化学位移值的大小主要取决于屏蔽作用的大小，而屏蔽作用的大...     

Photocatalytic Oxidation of Aniline in the Gas Phase Using Porous TiO2 Thin Films

The gas-phase photocatalytic oxidation of aniline on a new kind of porous nano-TiO₂ composite films is investigated. The composite film was prepared on glass fiber with the water glass as binders and dilute H₂SO₄ solution as solidifying reagent. The surface characters were observed by scanning electron microscope. The photocatalytic degradation of aniline on the composite films was carried out in a TiO₂/UV system. Some important factors affecting the photodegradation, such as the concentration of TiO₂, the initial concentration of aniline, and the existing water vapor, are also studied. The product of photocatalytic oxidation was detected by Fourier transform-Infrared. The partial intermediate products were absorbed on TiO₂ surface, which resulted in catalyst deactivation. But when it was irradiated under UV illumination or solar irradiation for some time, the catalyst could be reused without loss of catalytic activity. Translated from the Journal of Wuhan University (Natural Science Edition), 2005, 51(2) (in Chinese)     

Determination of adefovir in human plasma by liquid chromatography/tandem mass spectrometry: application to a pharmacokinetic study

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed and validated to determine the concentrations of adefovir [9-(2-phosphonylmethoxyethyl)adenine, PMEA] in human plasma. After one-step protein precipitation of plasma samples by methanol, adefovir was analyzed by LC/MS/MS using positive electrospray ionization. Chromatography was performed on a C18 column. The extraction recoveries of adefovir were found to be 85.1-89.3%. Adefovir was stable under routine laboratory conditions. A minimal matrix effect resulting in a slight ionization enhancement of adefovir (<10.9%) was observed, which did not markedly affect the behavior of the calibrations curves and accuracy and precision data. The method had a chromatographic run time of 7.8 min and a linear calibration curve over the concentration range 1.5-90 ng/mL for adefovir. The lower limit of quantification of the method was 1.5 ng/mL. The intra- and inter-day precision was less than 8.4%. These results indicated that this LC/MS/MS method has high selectivity and efficiency, and acceptable accuracy, precision and sensitivity. The validated LC/MS/MS method has been successfully used in a pharmacokinetic study in healthy volunteers treated with oral adefovir dipivoxil at 10 and 20 mg.     

On-surface isostructural transformation from a hydrogen-bonded network to a coordination network for tuning the pore size and guest recognition

Rational manipulation of supramolecular structures on surfaces is of great importance and challenging. We show that imidazole-based hydrogen-bonded networks on a metal surface can transform into an isostructural coordination network for facile tuning of the pore size and guest recognition behaviours. Deposition of triangular-shaped benzotrisimidazole (H₃btim) molecules on Au(111)/Ag(111) surfaces gives honeycomb networks linked by double N–H⋯N hydrogen bonds. While the H₃btim hydrogen-bonded networks on Au(111) evaporate above 453 K, those on Ag(111) transform into isostructural [Ag₃(btim)] coordination networks based on double N–Ag–N bonds at 423 K, by virtue of the unconventional metal–acid replacement reaction (Ag reduces H⁺). The transformation expands the pore diameter of the honeycomb networks from 3.8 Å to 6.9 Å, giving remarkably different host–guest recognition behaviours for fullerene and ferrocene molecules based on the size compatibility mechanism.

A hydrogen-bonded network on a Ag(111) surface can transform into an isostructural Ag(i) coordination network, giving drastically different host–guest recognition behaviours.     

Renewable amperometric immunosensor for complement 3 assay based on the sol-gel technique

A renewable amperometric immunosensor based on the sol-gel technique has been constructed by dispersing graphite, complement 3 (C3) antiserum, and sol-gel at low temperature. The prepared immunosensor is rigid, porous, and has a renewable external surface. A competitive binding assay has been used to determine C3 in human serum with the aid of C3 labeled with horseradish peroxidase. The enzyme-labeled antigen can readily diffuse toward the encapsulated antibody, which retains its binding properties. The experimental conditions for the assay with the biocomposite, including the loading of C3 antiserum in the biocomposite, the amount of labeled C3 in incubation solution, incubation time, and temperature, have been optimized. Using C3 labeled with horseradish peroxidase, and o-AP as the substrate, amperometric detection at -150 mV (relative to the SCE) results in a linear detection range of 1.17-35.1 microg mL(-1), with a detection limit of 0.56 microg mL(-1). Serum samples have been assayed and the results demonstrate the feasibility of the proposed immunosensor for clinical analysis. The surface of the immunosensor can be renewed simply by polishing to obtain a fresh immunocomposite ready to use in a new competitive assay.     

Syntheses and characterization of two new zinc phosphites with 1D chains decorated by Zn-centered complexes

Two inorganic-organic hybrid solids, Zn₂(phen)(HPO₃)₂ (1) and Zn(phen)(HPO₃) (2), have been synthesized under solvothermal conditions in the presence of 1,10-phenanthroline (phen) ligands. Their structures were determined by single-crystal X-ray diffraction and further characterized by FTIR, elemental analysis, powder X-ray diffraction, thermogravimetric analysis and fluorescent spectra. Compound 1 crystallizes in the triclnic system, space group P-1, , , , α=75.609(1)°, β=79.145(2)°, γ=67.157(2)°, , Z=2. Compound 2 is monoclinic, C2/c, , , , β=94.175(4)°, , Z=8. Both structures consist of 1D chains constructed from strictly alternating ZnO₄ and HPO₃ polyhedra through sharing vertices. The chains are further decorated by Zn-centered complex architectures, [Zn(phen)]²⁺ for 1 and [Zn(phen)₂]²⁺ for 2. The 2D and 3D supramolecular arrays for 1 and 2 are stably stacked via strong π-π interactions of the phen groups, respectively.     

Alkynylzirconation of alkynes and application to one-pot bisalkynylation of alkynes

Stereocontrolled alkynylzirconation of unactivated alkynes was achieved by the reaction of an alkyne with Cp2ZrEt2 and alkynyl halide in this order. After hydrolysis of the alkynylzirconation product, trisubstituted enyne derivatives were obtained in good yields. Functionalized enynes were also prepared by the reaction of the alkynylzirconation products with a variety of electrophiles. Subsequent addition of the second alkynyl halide to the alkynylzirconation products provided an in situ protocol for bisalkynylation of alkynes into (Z)-enediynes in good yields.     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

偏钛酸型锂离子交换剂固相合成反应动力学

偏钛酸型锂离子交换剂固相合成反应动力学钟辉＊郭灵虹（成都理工学院应用化学系成都６１００５９）（四川联合大学分析测试中心成都）关键词偏钛酸锂，离子交换剂，合成，固相反应动力学１９９７－０８－２５收稿，１９９７－１２－１０修回四川省应用基础研究基金资助项...