Rapid dendrite growth in quaternary Ni-based alloys

Dendritic growth is one of the most common micro-structural formation mechanisms during crystal growth. Its morphology provides the kinetics information of crystal growth. Therefore, it is valuable to perform the research on rapid dendrite growth in order…     

Shenzhousia qilianshanensis gen. et sp. nov. (Protodonata, Meganeuridae), a giant dragonfly from the Upper Carboniferous of China

A new dragonfly of family Meganeuridae Shenzhousia qilianshanensis gen. et sp. nov., discovered from Ningxia Hui Autonomous Region in North China, is described in the present paper. It has an estimated wingspan of about 450?500 mm and may be the largest fossil insect in Late Carboniferous Namurian Stage discovered by far. The new species is referred to Meganeuridae because of the presence of the characteristic oblique vein between anterior branch of radius (RA) and posterior branch of radius (RP) near the base of RP2. It differs from other genera within the family in the following characteristics: Precostal area short and not extending to the midwing; posterior branch of subcostal vein short, merging into costal vein near the level of originating point of IR₂; RP forking earlier than anterior branch of media basally; RP_1＋2 and RP_3＋4 parallel and close to each other for a long distance, and then diverge gradually surpass midwing.     

模具热处理工艺并行设计

针对目前模具热处理中存在的问题，提出模具热处理工艺并行设计的新思想，将热处理CAD／CAE集成于并行环境中，并建立了相关模型，在各模块之间以实体一关系模型串联，建立动态推理机制，可使各单元模型间实现联动效应．将温度、组织、应力及性能进行耦合是模具热处理未来发展的方向，但建立一个普适性的数学模型是必要的，通过灵活的管理与协调，可及时沟通信息，减少冲突与冗余过程。     

冷冲压模具质量综合评价体系的建立

针对冷冲压模具生产的特点，提出了模具质量综合评价体系和多层次递进修正指标体系；参照模具工艺和设计规范确定了评价标准，采用层次递进和模糊综合法进行了科学评价，实际应用表明该体系能够对模具质量做出客观、公正、公平的评价。     

Jin-Xin模型初边值问题整体光滑解的存在性

运用特征线法和一阶拟线性双曲系统极大值原理,在松弛时间ε充分小的条件下,对初值不做任何小性假设,得到解的先验估计,证明了Jin-Xin模型初边值问题整体光滑解的存在性.     

具有两类索赔的风险过程的破产概率

古典风险模型主要考虑同一类型的风险构成的风险过程，研究当承保人承保两类不同的风险时，相应的风险总和构成的风险过程．在两类索赔计数过程均为Erlang（2）过程时，通过补充新的风险过程和相应的破产概率，通过考虑在首个指数时刻发生的不同情况，推导出破产概率所满足的微积分方程组，并就索赔额服从指数分布的情形得到了破产概率的精确表达式．最后利用更新方程还给出了不同类型破产概率的一个上界．这些结论的得出对于保险人评估风险具有重要的指导意义．     

凉山州马铃薯产业现状及发展对策浅析

本文对凉山州马铃薯产业现状、限制因素、潜力及优势等进行了分析,针对问题提出了发展马铃薯应采取的对策。     

中间相沥青基介孔炭的表征及其用作锂离子电池负极材料的电化学性能

以中间相沥青为碳源、CaCO_3为模板,制备中间相沥青基介孔炭(MPMC)。采用XRD、SEM、TEM等手段表征所制介孔炭的结构和形貌,并将其用作锂离子电池的负极材料,测试电化学性能。结果表明,所制MPMC具有丰富的介孔结构和较大的比表面积及孔体积,随着CaCO_3质量分数的增加,MPMC的比表面积和孔体积先增加后减小,当CaCO_3的质量分数为70%时,所制MPMC的比表面积和孔体积最大;MPMC用作锂离子电池负极材料具有良好的电化学性能,能有效提高锂离子电池的可逆比容量,具有良好的循环稳定性和倍率性能。     

Synthesis of Novel Naphthoquinone Fused 1, 3-Dithioles

2, 3-Dichloro-1, 4-naphthoquinone 3 reacts with 1, 1 -dithiolates 2, prepared from the reaction of CH-acids and carbon disulfide, to give 2-methylidene-4, 10-dioxonaphtho [2, 3-d]-1, 3-dithioles 4. The similar reaction of 3 and dithiocarbamates 6 affords 2-imino-4, 10-dioxonaphtho [2, 3-d] dithioles 7.