太赫兹波在一维反铁磁/电介质准周期光子晶体的传输性质

本文利用传递矩阵方法研究了电磁波倾斜入射时,一维反铁磁/电介质准周期光子晶体的透射性质.反铁磁层和电介质层按Fibonacci数列排列构成准周期光子晶体.通过数值模拟发现光子禁带中有透射峰出现, 而且随着准周期光子晶体级数的增加透射峰的数目也在增加.此外,透射峰受电介质层的介电常数、入射角度和电磁波偏振影响明显. 关键词： 反铁磁层 准周期光子晶体 太赫兹波传输性质     

扩展卡尔曼滤波和不敏卡尔曼滤波在实时雷达回波反演大气波导中的应用

为了改善雷达回波反演大气波导(RFC)方面存在的单时次、单方位角反演的问题,提出利用扩展卡尔曼滤波和不敏卡尔曼滤波的反演算法对大气波导结构的多方位角实时跟踪反演. 在卡尔曼滤波方法中分别给出大气波导结构的参数化方程、观测方程、滤波算法的状态转移方程,最后导出滤波反演算法的迭代求解流程. 在大气波导结构不随时间变化和随时间变化的两种条件下,对扩展卡尔曼滤波和不敏卡尔曼滤波算法进行数值实验. 实验结果表明,不敏卡尔曼滤波更适用于RFC这高度非线性反演问题,它可能今后为大气波导结构多方位角实时跟踪反演的业务化运行提供理论基础与技术保证. 关键词： 大气波导 雷达回波 扩展卡尔曼滤波 不敏卡尔曼滤波     

全谱拟合法研究聚丙烯腈基碳纤维形成过程中晶态结构演变

通过全谱拟合法对碳纤维制备过程中不同阶段纤维的XRD谱图进行处理,得到不同阶段纤维的微观结构参数,研究了聚丙烯腈(PAN)基碳纤维制备过程中晶态结构的演变.全谱拟合法基于晶体衍射的严格物理理论,拟合目标为整个衍射谱,并不是个别衍射峰,所得结果具有更高的可信度.研究结果表明:PAN原丝中的高分子链沿纤维轴高度取向,表观晶粒尺寸为6.5 nm左右;经过预氧化处理,纤维中的有序结构遭到破坏,表观晶粒尺寸锐减.纤维中逐渐形成梯形结构并沿纤维轴取向,从而形成新的有序结构;经过碳化处理后,环状梯形结构转变为碳的层状结 关键词： 碳纤维 晶体结构 XRD 全谱拟合法     

Tunable radiation source by coupling laser-plasma-generated electrons to a periodic structure

Near-infrared radiation around 1000 nm generated from the interaction of a high-density MeV electron beam, obtained by impinging an intense ultrashort laser pulse on a solid target, with a metal grating is observed experimentally. Theoretical modeling and particle-in-cell simulation suggest that the radiation is caused by the Smith-Purcell mechanism. The results here indicate that tunable terahertz radiation with tens GV/m field strength can be achieved by using appropriate grating parameters.     

Frabicating hydroxyapatite nanorods using a biomacromolecule template

Rod-like hydroxyapatite (HAp) nanoparticles with various aspect ratios are synthesized by means of low-temperature hydrothermal method in the presence of a N-[(2-hydroxy-3-trimethylammonium) propyl]chitosan chloride (HTCC) template. The synthesized HAps were examined by X-ray diffraction (XRD), Fourier transform infrared spectrophotometer (FTIR) and transmission electron microscopy (TEM) techniques. The results reveal that HAps are rod-like monocrystals, where the size and morphology can be tailored by varying synthesis conditions, such as pH, hydrothermal synthesis temperature and the ratio of PO₄³⁻ to the quaternary ammonium in HTCC. The mechanism of HTCC template on HAp nanorod preparation is analyzed.     

单目摄像机-激光测距传感器位姿测量系统

在单目视觉测量中,由于模型自身的限制,沿摄像机光轴方向上的位移测量精度一般远低于垂直光轴方向上的位移测量精度.首先,从数学模型上分析了单目视觉位姿测量在沿光轴方向上位移测量精度低的原因;然后,为了提高沿摄像机光轴方向上的位移测量精度,通过在沿摄像机光轴方向上加装一个高精度的激光测距传感器,设计了一种单目摄像机-激光测距...     

Photoemission intensity oscillations in the valence bands of C70 film

We have measured and analyzed the photoemission spectra (PES) of a C₇₀ film in the photon energy region from 13.4 eV to 98.4 eV. The photoelectron intensities of two C 2p π-derived features (denoted by A and B) oscillate regularly in the whole energy region with some fine structures below ∼30 eV. To obtain the detailed information of the oscillations, we have developed a sophisticated but practical procedure for intensity calculation. The procedure consists of two core concepts. The first is ascribing the PES features to their corresponding molecular orbitals with the help of density functional calculations. The second is a background subtraction algorithm. With this procedure, we obtained the oscillating behavior for individual features (A and B), which is by and large consistent with the predictions based on the spherical symmetric approximation although C₇₀ has the ellipsoidal shape. Owing to the solid state effect, the oscillating amplitudes of the A/B intensity ratios are smaller than those of gas phase C₇₀, but an orbital shift reported recently was not observed on our sample. The oscillating curve of a deeper feature, which consists of both σ and π states, are also reported.     

Simulation for light power distribution of 3D InGaN/GaN MQW LED with textured surface

In this paper, we introduce a full 3D simulation for light power distribution of an InGaN/GaN MQW LED with a textured surface. Device simulation was performed with the APSYS software to get power distribution of light sources inside the LED. Based on this, ray tracing simulation was carried out to get light power distribution outside the LED. During the process of ray tracing, the textured surface was treated as a special material interface whose reflectivity, transmittance and refraction angle are obtained with a Finite-Difference Time-Domain (FDTD) method instead of using the usual Fresnel formulas for normal material interfaces. By comparing the ray tracing results with and without the textured surface, we found that the textured surface yields a smoother transmitted power distribution and greatly improved power extraction efficiency, which are comparable to experiment. These effects may be further improved by optimizing the texture geometry.     

Synthesis and characterization of Ag-doped p-type ZnO nanowires

P-type ZnO nanowires with silver (Ag) doping were synthesized via a chemical vapor deposition process. The incorporation of Ag was confirmed by selected-area energy-dispersive x-ray spectroscopy. The formation of acceptor states was demonstrated by temperature and excitation power-dependent photoluminescence measurements. Characterization of field-effect transistors using Ag-doped ZnO nanowires as channels showed p-type conductivity of the nanowires with a hole concentration of 4.9×10¹⁷ cm⁻³ and a carrier mobility of approximately 0.18 cm² V⁻¹ s⁻¹.     

A study on the systems of the Volterra integral forms of the Lane–Emden equations by the Adomian decomposition method

In this paper, we introduce systems of Volterra integral forms of the Lane–Emden equations. We use the systematic Adomian decomposition method to handle these systems of integral forms. The Volterra integral forms overcome the singular behavior at the origin x = 0. The Adomian decomposition method gives reliable algorithm for analytic approximate solutions of these systems. Our results are supported by investigating several numerical examples. Copyright © 2013 John Wiley & Sons, Ltd.