Screening of glycoside isomers in P. scrophulariiflora using ionic liquid‐based ultrasonic‐assisted extraction and ultra‐performance liquid chromatography/electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry

A powerful ionic liquid‐based ultrasonic‐assisted extraction (ILUAE) method combined with ultra‐performance liquid chromatography coupled to electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry (UPLC/ESI‐QTOFMSⁿ) was employed in the rapid simultaneous screening of iridoid glycosides, phenylethanoid glycosides, and cucurbitacin glycosides from P. scrophulariiflora. The ILUAE procedure was optimized over several ultrasonic parameters, including the ultrasonic power, concentration of the ionic liquid, and solid–liquid ratio. A comparison with conventional heat‐reflux extraction and regular UAE demonstrated that the optimized approach yielded a high extraction efficiency (Picroside I, 2.84%; Picroside II, 3.57%; 6‐O‐E‐feruloyl catalpol, 2.20%) within a short extraction time of 30 min. Negative ion mode ESI‐QTOFMS² analysis of the fragmentation reactions of the [M–H]^– ions was conducted to characterize the diagnostic ions related to the glycosyl moieties, aglycone units, and the type and substituted position of the ester groups. Interestingly, the positional isomers of the iridoid glycosides could be easily discriminated based on the characteristic ions. A total of 15 glycosides, including three groups of iridoid glycoside isomers and two groups of phenylethanoid glycoside isomers, were conveniently identified within 13.5 min. Moreover, 6'‐O‐vanilloyl catalpol was identified in P. scrophulariiflora for the first time. The method developed here was further validated by measuring the recovery, correlation coefficient (R²), and reproducibility (RSD, n = 5) of three iridoid glycosides: 89.60%–109.02%, 0.9991–0.9998, and 0.93%–1.44%, respectively. This study demonstrated the capabilities of ILUAE combined with UPLC/ESI‐QTOFMSⁿ for the rapid screening of glycosides in P. scrophulariiflora. This method offers an approach to similar studies on other natural plants. Copyright © 2012 John Wiley & Sons, Ltd.     

Upper Critical Solution Temperature-Type Responsive Cyclodextrins with Characteristic Inclusion Abilities

Water-soluble and thermoresponsive macrocycles with stable inclusion toward guests are highly valuable to construct stimuli-responsive supramolecular materials for versatile applications. Here, we develop such macrocycles – ureido-substituted cyclodextrins (CDs) which exhibit unprecedented upper critical solution temperature (UCST) behavior in aqueous media. These novel CD derivatives showed good solubility in water at elevated temperature, but collapsed from water to form large coacervates upon cooling to low temperature. Their cloud points are greatly dependent on concentration and can be mediated through oxidation and chelation with silver ions. Significantly, the amphiphilicity of these CD derivatives is supportive to host-guest binding, which affords them inclusion abilities to guest dyes. The inclusion complexation remained nearly intact during thermally induced phase transitions, which is in contrast to the switchable inclusion behavior of lower critical solution temperature (LCST)-type CDs. Moreover, ureido-substituted CDs were exploited to co-encapsulate a pair of guest dyes whose fluorescence resonance energy transfer process can be switched by the UCST phase transition. We therefore believe these novel thermoresponsive CDs may form a new strategy for developing smart macrocycles and allow for exploring smart supramolecular materials.     

Thermo-induced structural transformation with synergistic optical and magnetic changes in ytterbium and erbium complexes

Dinuclear ytterbium and erbium based bifunction complexes Ln₂L₂(depma₂)Cl₂ (1-Ln, Ln = Yb and Er, H₂L = N¹,N³-bis(salicylideneimino)diethylenetriamine, depma₂ = dimerized 9-diethyl-phosphonomethylanthracene) are reported. They undergo thermo-induced consecutive phase transitions, first the dissociation of depma₂ ligand forming LnL(depma)Cl (2-Ln) and then the release of chloroethane forming LnL(epma) (3-Ln, epma = 9-ethylphosphonomethylanthrancene). The structural transformations are accompanied with synergetic switch of the luminescence in visible and NIR regions and also magnetic dynamics.     

Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.     

Palladium‐catalyzed Suzuki–Miyaura coupling with aryl and heteroaryl bromides using N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (1) combined with PdCl₂ affords an efficient catalytic system for Suzuki cross‐coupling of aryl and heteroaryl bromides. A high turnover number of 750 000 is obtained with the catalyst loading as low as 1 ppm. This catalyst system exhibits good stability and longevity. In this study, a broad scope of substrates is investigated and satisfactory yields are obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

杠杆教学的高端备课

从杠杆的本质出发,提出杠杆是“放大”或“缩小”力的装置.按照从特殊到一般的顺序进行杠杆的教学,通过强化研究思路,全面介绍杠杆分类,从而使杠杆教学达到一个新的水平.     

Simultaneous determination of eight components in Angelica sinensis based on UHPLC‐ESI‐MS/MS method for quality evaluation

A method employing ultra‐high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) for determination of eight components including ferulic acid, senkyunolide A, butylphthalide, ligustilide, butylidenephalide, senkyunolide I, senkyunolide H and levistolide A in Angelica sinensis was established. The separation was carried out using a Waters ACQUITY UHPLC BEH C₁₈ column with gradient elution with 0.1% formic acid aqueous and acetonitrile at a flow rate of 0.4 mL/min. Good linearity was attained with R² of 0.9983–0.9998 in wide concentration ranges. The method had limit of detection (LOD) and quantitation (LOQ) in the range of 0.42–6.98 ng/mL and 1.39–23.28 ng/mL, respectively. Intra‐ and inter‐day precisions varied with relative standard deviations (RSDs) from 0.33% to 0.88% and 0.37% to 1.04%, respectively. Moreover, the average recoveries were in a satisfactory range of 92.7%–102.1% with RSDs of less than 3.60%. Finally, the method was successfully applied to analyze 19 batches of A. sinensis samples grown in Min County, Gansu province, China, as well as that collected in other regions. The findings indicated that the established method is reliable and may thus be applied as a powerful tool for qualitative and quantitative analysis of components in A. sinensis, which has its implications in quality control of A. sinensis.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

A three-dimensional in vitro culture model for primary neonatal rat ventricular myocytes

To overcome bad prognosis of patients with heart failure and the lack of organ donors, cardiac tissue engineering has developed as a biomimetic approach to repair, replace, and regenerate the damaged cardiac tissue. During the past decade years, researchers are devoted to find different natural and/or synthetic materials that can build appropriate physical structures to contain and organize implanted cells. In this study, we present a new method for primary neonatal rat cardiomyocytes culture in vitro using alginate/collagen/chitosan hydrogel. To investigate the feasibility of this material as scaffold for cardiac myocytes, neonatal rat ventricular myocytes were isolated and encapsulated in alginate-based beads cross-linked with calcium ion. The growth of cells was evaluated by staining with α-Sarcomeric actin (α-SCA) and Troponin T type 2 (TNNT2), and the viability of cardiomyocytes was studied in vitro by assessing the expression levels of several cardiac ion channels, including CACNL1A1, Connexin 43 and SCN5A. The results showed a significant increase in cardiac myocytes number, and the expression levels of CACNL1A1, Connexin 43 (Cx43) were up-regulated significantly except SCN5A, as compared with two-dimensional cultures. Moreover, extracellular matrix produced by the seeded cells themselves was observed by staining with fibronectin. Taken together, these findings indicate that this alginate/collagen/chitosan hydrogel bead is suitable for supporting the growth and retaining the morphologic and electrophysiologic characteristics of primary cultured rat cardiac muscle cells.