带有弹性碰撞的离散的凝结方程

带有弹性碰撞的离散的凝结方程是反映粒子增长动力学的数学模型，它刻划了这样一种粒子反应系统；系统中任意两个粒子碰撞后一定的概率或者凝结成为更大的粒子，或者发生弹性碰撞．本文研究了这一系统发生冻肢的可能性，并给出了一个充分条件．     

双间隙加速管设计中几个问题的研究

对加速管的放电或击穿与绝缘环，电极材料，极间距离和真空度等因素的关系进行了分析，为加速管的设计提供了依据。以此研制的加速算运行正常。     

HL－1装置中LHCD和等离子体参数的关系

本文研究了在ＨＬ－１托卡马克的不同放电阶段的低混杂波驱动特性。给出了驱动电流及驱动效率和等离子体参数，如电子平均密度ｎｅ、等离子体电流Ｉｐ及纵向磁场的关系。也给出和分析了波驱动和入射波功率的关系。在放电平段，对正反向驱动效率进行了研究和比较。     

高含固量聚苯乙烯－聚丙烯酸酯复合乳胶的合成及表征

本文采用种子乳液聚合技术，合成聚苯乙烯－聚丙烯酸酯复合乳液，用ＴＥＭ电镜观察其乳液的形态，用ＧＰＣ方法测定了乳胶聚合物的化学组成。     

A note on an SOR-like method for augmented systems

Golub et al. (2001, BIT, 41, 71–85) gave a generalizedsuccessive over-relaxation method for the augmented systems.In this paper, the connection between the SOR-like method andthe preconditioned conjugate gradient (PCG) method for the augmentedsystems is investigated. It is shown that the PCG method isat least as accurate (fast) as the SOR-like method. Numericalexamples demonstrate that the PCG method is much faster thanthe SOR-like method.     

New Synthetic Method for Industrial Manufacture of Glutaric Dialdehyde

A new synthetic method for the manufacture of glutaric dialdehyde is investigated. Glutaric dialdehyde was prepared by the addition-hydrolysis reaction of benzimidazolium salt with saturated dihalide as the di-Grignard reagent. The yield of glutaric dialdehyde by this method can reach 73%. Both infrared spectra and melting point of the compound were consistent with those reported earlier. Translated from Journal of Northwest University (Natural Science Edition), 2005, 35(2) (in Chinese)     

无界报酬向量值折扣马氏决策规划—最优平稳策略及算法

本文主要讨论了无界报酬向量模型的平稳策略问题，给出了改进平稳策略的方法，建立起向量模型的最优方程，获得平稳策略为强最优策略的充要条件．指出最优平稳策略的期望报酬函数必为极大不动点，最后提出一种寻求最优平稳策略的策略迭代算法．     

诚信教育:高校德育的一项重要内容

随着我国社会主义市场经济的不断完善、发展，诚信教育呼之欲出。新的社会环境下．诚信的内涵及其呈现出的新特点，要求教育应把诚信教育作为高校德育的重要内容并纳入其全过程，应有针对性、行之有效地开展诚信教育。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007