CS-CMC聚合物电解质膜的制备及在电生成FeO2-4中的应用

以戊二醛为交联剂,制备了壳聚糖(CS)-羧甲基纤维素(CMC)聚合物电解质膜.用电子显微镜观察其表面形貌.IR分析表明该聚合物薄膜含有COOH,NH3+官能团,具有两性离子的特征.与CS膜或CMC膜相比,该膜能稳定存在于酸碱溶液中.膜特性研究表明CS-CMC聚合物电解质膜具有离子交换和选择性渗透能力,可作为隔膜电解制备高铁酸盐.     

Lamb波频域逆散射全聚焦成像方法研究

Lamb波因其传播距离远、衰减小常被用于板状结构的无损检测中,在基于Lamb波损伤检测的诸多成像技术中,全聚焦方法(Total Focus Method,TFM)方法因其成像分辨率高、信噪比高而受青睐.然而Lamb波的频散效应导致时域延时量不能被准确计算,进而影响传统TFM方法对损伤定位及成像的精度;此外,既有的TFM...     

DME/LPG混合燃料HCCI燃烧模拟

根据碳氢燃料化学反应系统具有层次结构的特性,本文通过分析二甲醚(DME)与液化石油气(LPG)的详细化学反应机理,构建了反映DME／LPG混合燃料均质压燃(HCCI)燃烧的详细化学反应机理．采用该机理应用单区燃烧模型对DME／LPG混合燃料HCCI燃烧的化学反应动力学过程进行了数值计算．计算结果与试验结果对比表明,所构建的DME／LPG混合燃料氧化的详细化学反应机理能够准确预测DME／LPG混合燃料的两阶段放热特性,对低温和高温着火始点的预测很好;但高温反应过程预测欠佳,高温反应机理需要改进．     

吡啰红B为指示剂细胞色素C催化荧光测定青蒿素

在细胞色素C催化下,吡啰红B与青蒿素反应导致荧光降低,细胞色素C与青蒿素的反应为酶-底物模型。动力学研究表明,稳态催化速率依赖于酶和底物浓度,催化常数Km、Vm ax及Kcat分别为3.3×10-5mol/L,5.4×10-6mol.L-1.s-1和13.5 s-1,催化活性受去活化剂和乙醇抑制。在pH 5.3、25℃及7.6×10-7mol/L的细胞色素C催化条件下,荧光降低值ΔF(F0-F)与青蒿素浓度在7.1×10-8~1.1×10-6mol/L范围内呈线性关系;检出限为7.2×10-9mol/L;加标回收率为96.3%~106.8%。方法已用于测定血浆和尿液介质中的微量青蒿素。     

六味地黄丸的精细指纹图谱分析及模式识别分类研究

采用高效液相色谱建立了六味地黄丸的指纹图谱,对两个厂家的16批产品进行了测定,并结合中药相似度软件和主成分分析法对全指纹图谱和其精细指纹图谱进行了模式识别研究。结果表明,中药相似度软件能够对不同厂家的产品进行区分但也可能造成误判;在主成分分析法的投影图中,两个厂家的产品明显聚为两类,而且不同批次产品的差异也能够显示出来。     

固定化酶反应器及其在蛋白质组研究中的应用

综述了近年来国内外酶固定化载体的研究进展,侧重于无机材料和有机聚合物材料上的固定化酶方法;此外,也介绍了固定化胰蛋白酶反应器与分离系统联用在蛋白质样品分析中的应用,并展望了固定化酶反应器的研究方向及其在蛋白质组中的应用前景。     

CONTINUUM TOPOLOGY OPTIMIZATION FOR MONOLITHIC COMPLIANT MECHANISMS OF MICRO-ACTUATORS

A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes (MMA), is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.     

A buffer insertion and simultaneous sizing timing optimization algorithm

A path-based timing optimization algorithm for buffer insertion and simultaneous sizing is proposed. Firstly, candidate buffer insertion location and buffer size for each branch in a given routing path were obtained via localized timing optimization. Then, through evaluating each potential insertion against design objectives, potential optimal buffer insertion locations and sizes for the whole routing tree were determined. At last, by removing redundant buffer insertion operations which do not maximize S （ so ）, given timing requirements are finally fulfilled through minimum number of buffers.     

Synthesis of macrocyclic polystyrene-polydimethylsiloxane block copolymers

A series of macrocyclic polystyrene (PS)-polydimethylsiloxane (PDMS) block copolymers and similar block copolymers was synthesized by sequential polymerization of styrene and hexamethyl cyclotrisiloxane (D₃) initiated by a difunctional anionic initiator in THF at −78° followed by coupling with Cl₂SiMe₂ in very dilute (10⁻⁵ – 10⁻⁶ M) solutions. Total molecular weights ranged from about 2–85 × 10³. The formation of monodisperse macrocyclic block copolymers was indicated by the lower (15–30%) hydrodynamic volume of the rings compared to that of the linear block copolymers. Carbon-13 and ²⁹Si NMR likewise supported the absence of linear polymer in the macrocyclic block copolymer. The behavior of second virial coefficient A₂ of the rings and the linears versus temperature was examined by static light scattering in cyclohexane. Below 20° the A₂ for the linear polymer goes negative while that for the cycle remains positive. Dynamic light scattering (DLS) as a function of temperature also reflects that the cyclic polymers remain well solvated even down to 12°C. The DLS autocorrelation functions for the linear triblock however demonstrate the onset of aggregation and phase separation as the temperature is reduced below 20°C.     

天文与人文-四象--龙、虎、凤、龟

远古天文,实指星象;古文字“文”与“纹”通,可证.当初,天文乃人类以点点繁星为背景所幻想的天空图案,故,古天文反映着古代人文.四象,又称四神或四灵.用为中国承传天文体系中的星空主要区划.四象既可表征四方与四时,又等分二十八宿为四宫,系二十八宿成熟期标志,并保留有更为原始的变演痕迹;隐现有远古人类对自然宇宙的神化与崇拜.视为人文区分,四象表征着远古人类族系间的征战、兴亡等混同拓展过程,四象也必然成为不同族系或族群所崇拜的图腾神;反映出东方文明的伊始条件.