四甲基苯二甲基二异氰酸酯基水性聚氨酯的合成和性能

采用四甲基苯二甲基二异氰酸酯、聚酯二元醇和二羟甲基丙酸为原料,合成了一系列具有不同异氰酸根与羟基摩尔比（n(-NCO)/n(-OH)）的聚氨酯乳液。 研究了n(-NCO)/n(-OH)对水性聚氨酯性能的影响。 结果表明,当该比值增加时,乳液的粒径增大,分布变宽,结晶性降低,耐热性下降,耐水性能呈现降低的趋势。 当异氰酸根与羟基摩尔比为3时,四甲基苯二甲基二异氰酸酯基水性聚氨酯的乳液粒径为10～30 nm,膜的分解温度达到275 ℃,24 h吸水率低于10%。     

Synthesis and characterization of novel redox-active percec-type dendrons

Three novel redox-active percec-type dendrons were synthesized by mucleophilic substitution reaction of 11-bromoundecyl ferrocene and substituted benzoate.All the resultant ferrocenyl-modified dendrons were confirmed through FT-IR,NMR,and elemental analysis,etc.Furthermore,the thermal properties and electrochemical behavior of these dendrons were monitored with thermogravimetry analysis(TG),differential scanning calorimetry(DSC),polarized optical microscope(POM),and cyclic voltammetry(CV). Abound phase behavior and reversible electrochemical redox reaction process in the DMF solution of these dendrons was observed.     

Removal of Endotoxin from Human Serum Albumin Solutions by Hydrophobic and Cationic Charged Membrane

Removal of end6toxin from medicine injection is very important, becauseendotoxin withpotential biological activity causes pyrogenic and shock reactions in' mammals-'on...intravenous injection even as law as "an6gram amounts. Endotoxin, a constituent ofpotential contaminant of physiological fluids and aqueous solutions 'and very stable atextreme temperature and PH values. For removing endotoxin from solutions ofbiomolecules, such as HSA, adsorption techniques are usedl.' Many methods forendot…     

铅硫二元团簇Pb5S+4的理论研究

用密度泛函方法对铅硫二元团簇Ｐb５Ｓ４＋的结构和性能进行了理论研究。结果表明,具 有Ｃ,对称性的笼状结构的异构体最稳定。根据计算所推测的该团簇的性质与实验结果下一致。     

X-ray Crystal Structure and Molecular Mechanics Calculations of (2,6-iso-dipropyl-phenylamide) Dimethyl ( tetra-methylcyclopenta-dienyl ) Silane Titanium Dichloride

Crystal and molecular structure of (2,6-dipropylphenylamide) dimethyl (tetra-methyl cyclopentadienyl) silane titanium dichloride (I) was fully characterized by X-ray diffraction. The crystal is obtained from a mixture of ether/hexane as orthorhombic, with a = 12.658 (3) (A), b = 16.62 (3)(A), c = 11.760 (2)(A), V = 2474.2 (9)(A) 3, Z = 4, space group Pnma, R = 0.0399. Componud I compose of the π-bounded ring with its dimethylsilyl-dipropyl phenyl amido group and the two terminal chloride atoms coordinated to central metal to form a so-called constrained geometry catalyst (CGC) structure. The result of molecular mechanics (MM) calculations on compound I shows that bond lengths and bond angles from the MM calculation are comparable to the data obtained from the X-ray diffraction study. The relation of the structure of CGCs and their catalytic activity by MM calculations is also discussed.     

纳米晶材料SrMgxTi1-xO3的合成与表征

采用硬脂酸法合成纳米晶SrMg_xTi_1-xO₃(x=0.1～0.5)材料.用DTA,TG,XRD,IR,XPS和TEM进行表征.结果表明,粉末粒径d随SrMg_xTi_1-xO₃中镁含量、烧结温度和烧结时间的改变而变化;烧结所产生的粉末粒度分布均匀、大小适中;Mg²⁺部分替代SrTiO₃的Ti⁴⁺后,O的1_s光谱随着Mg²⁺含量的不同而发生变化.     

新型水溶性硫杂蒽酮类光引发剂的光引发性能研究

利用红外光谱技术对六种新型水溶性硫杂蒽酮类光引发剂在紫外光聚合反应中的引发性能进行了测试,用相对峰面积法计算了聚合反应的转化率,并据此对引发剂结构与光化学性能之间的关系做了一定的探讨。结果表明该类光引发剂具有很高的光化学活性,而引发剂的结构直接影响引发性能。研究发现硫杂蒽酮母体上甲基的引入使引发剂的引发效率增大,而引发剂侧链上羟基的引入,则由于降低了质量转移的有效性并有可能使引发剂分子缔合,致命引     

MoCo/Y, MoNi/Y氮化物催化剂的结构和CH4+CO2重整反应性能

采用氨气还原法制备了NaY分子筛负载的MoCo/Y、MoNi／Y双组氮化物催化剂，用XRD和EXAFS方法征了样品的结构，并测定了其在CH4＋CO2重整反应中的活性，在氧化态时，MoCo/Y样品中主要存在CoMoO4和Co3O4两种物相，Mo的配位状态接近于CoMoO4，而Co的配位状态更接近于Co3O4，MoNi／Y样品中主要有NiMoO4和NiO两种物相，Mo的配位状态接近于MiMoO4，而Ni的配位状态可能是NiMoO4和NiO两种化合物中Ni配位状态的平均效果，Ni-Mo之间的朴素作用似乎比Co-Mo相对较强，在氮化态时，两种样品中Mo的配位状态较为相似，但即不同于MoO3，也不同于单组分γ－Mo2N.Co和Ni的配位状态都不同于各在氧化态下的状态，且都在相同的位置出现一个新强峰，这似乎表明MoCo和MoNi生成了结构相似的氮化物，在CH4＋CO2重整反应中，氮化态MoCO/Y和MoNi/Y的活性大大超过非负载单组分γ－Mo2N催化剂，其中MoNi/Y的活性相对更好一些，且活性随Ni含量增加而提高。     

氢化硝基苯合成对氨基酚中活性炭负载铂催化剂的新制备方法研究

采用不同还原剂（甲醛、甲酸、硼氢化钾和氢气）,或于还原Pt(IV)过程中引入少量Pt/AC(AC：活性炭)催化剂“催化”氢气分子,制备了Pt/AC催化剂。其催化氢化硝基苯制对氢基酚的反应结果表明,制备催化剂时所用的还原剂对催化剂的活性影响很大,但对反应选择性影响较小。用甲醛、甲酸和硼氢化钾还原制成的催化剂的活性皆较高;以氢气还原制得的催化剂活性较差;采用“催化”氢气还原法,可大大提高Pt/AC催化剂的活性,与传统甲醛还原法相比,甲酸和“催化”氢气还原制备Pt/AC催化剂的方法较简便、有效。     

离子色谱法同时测定水中六种阳离子

研究了用抑制电导离子色谱法一次进样同时测定水中Li^ ,Na^ , NH4^ ,Mg^2 ,Ca^2 的色谱法条件，相对标准偏差小于0．5％，加标回收率在97．5％－104．0％。在水质分析中运用t检验法，比较了用钙、镁离子浓度计算和传统方法测定的总硬度之间是否存在显著性差异。