电磁相分离法制备自生表层复合材料

采用电磁相分离法制备出以初生富铁相（AlSiFeMn复杂金属间化合物）为增强相，表层硬度为HB62．25，基体硬度为HB59．00的Al-11.70%Si-1.20?-1.50%Mn合金自生表层复合材料，增强相的显微硬度为HV 842。87，大小为20－80μm，该表层复合材料同基体材料相比，耐磨性提高了57．41％，所用方法工艺过程简单，成本低，为解决材料在服役环境中不同部位，不同性能的问题提供了新途径。     

Magnetic resonance imaging and pulsed Doppler sonography of poststenotic jets: Correlation between signal void and flow velocity distribution

To correlate the appearance of poststenotic jets on gradient echo images with features of localized Doppler spectra of the jets, we studied an in vitro model of steady flow-through stenoses of 86, 96, and 99% area reduction. As fluids, water and a 40% glycerol solution in water were used. MRI was performed with a 1.5 T whole body imager and gradient echo images were obtained in planes parallel to the direction of flow. Doppler spectra were acquired separately from the MR measurements at 1 cm intervals for a distance of 10 cm downstream from the stenosis. Poststenotic signal void was observed for water and for the 40% glycerol solution only if the mean velocity within the stenosis exceeded a limit of 50–60 cm/sec. On the MR images, the jets could be divided into two segments: A proximal jet segment of uniform width equal to the diameter of the stenosis, followed by a distal jet segment which was characterized by broadening and then dissipating signal void. Except for the 99% stenosis, a high signal intensity core was present within the proximal jet segment. In the proximal jet segment, the Doppler measurements showed a low temporal fluctuation of the maximal flow velocity and only little flow opposite to the main flow direction. In the distal jet segment, the velocity fluctuation and the intensity of reverse flow increased sharply. The high signal intensity core of the jet was associated with a poststenotic zone of constant maximal flow velocity. The results demonstrate a close relationship between characteristic features of poststenotic jets in MRI and pulsed Doppler sonography.     

HL—1装置等离子体密度反馈实验

本文叙述HL-1装置用反馈脉冲补充送气方式控制等离子体密度的方法及实验结果。给出了在固有的物理实验条件下的最佳反馈方式,实现了对密度的有效控制及反馈。讨论了在不同密度条件下的几种反馈方式及反馈系统尚存在的不足之处。     

人工神经网络在SARS疫情分析与预测中的应用

讨论人工神经网络在 SARS疫情分析与预测中的应用 .采用三层结构的反向传播网络 ( Backpropagation network,简称 BP网络 ) ,对 SARS在中国的传播与流行趋势及控制策略建立了网络模型 .并利用实际数据拟合参数 ,针对北京、山西的疫情进行了计算仿真 .结果表明 ,该网络模型算法收敛速度较快 ,预测精度很高     

Spectroscopic and Structural Study of the 1：2 Aluminium（Ⅲ） Complex of Quercetin

Complex formation between aluminium and quercetin（Q） in methanol was investigated by means of 27^Al solid-state, 13^C and 1^H NMR and MS（ESI）, UV and IR spectra. Formation of the 1：2 complex was favored in methanol relative to all other solvent and the predominant species observed of Al（Ⅲ） has a 1：2 stoichiometry. The fine structure of 1：2 aluminum complex of quercetin was that the aluminum central atom chelated with two quereetin molecules and two methoxyl groups between two five membered rings, its coordination is six, the chelated site was 3-hydroxy-4-carbonyl.     

一类多线性积分算子的端点有界性

本文对一类相关于非卷积型算子的多线性算子,证明了其在端点情形上的有界性,该算子包括Littlewood-Paley算子和Marcinkiewicz算子．     

求代数方程组数值解的智能新方法

本文针对解代数方程组计算复杂和非线性方程组的解难以得到问题，提出了一种适合于不同类型方程组的通用算法．模拟生物进化过程，利用仅以变异作为唯一基因操作的EP方法来求方程组的最优解或次最优解．首先建立智能化的通用方程组，再利用改进的EP方法(在自适应方法中引入小生境思想)来求解方程组．算法既简单又具有通用性，最后举例说明本方法的有效性．     

中长跑的选材与预测

本文从系统学角度,探讨如何控制中长跑选材的过程,并从生理、心理、身体素质以及身体形态等方面探讨如何以科学的选材方法和手段为依据,指导教练选出优秀人材,进行早期培养,缩短其成材周期,提高成材率。     

原子态的确定

本文提出了三种较简单的确定等效电子原子态的方法。第一种方法可直接给出等效电子的原子态,但比较复杂;另外两种方法,虽然要利用非等效电子的原子态才能给出等效电子的原子态,但方法简单。我们以np~2组态为例说明这三种方法。