Inhibition of the toxic byproduct during photocatalytic NO oxidation via La doping in ZnO

It is of a great challenge to develop semiconductor photocatalysts with potential possibilities to simultaneously enhance photocatalytic efficiency and inhibit generation of toxic intermediates.In this study,we developed a facile method to induce the La doping and cationic vacancie(V(Zn))on ZnO for the highly efficient complete NO oxidation.The photocatalytic NO removal efficiency increases from 36.2%to 53,6%.Most importantly,a significant suppressed NO2 production also has been realized.According to the DFT calculations,ESR spectra and in situ FTIR spectra,the introduction of La^3+induce the redistribution of charge carriers in La-ZnO,which promote the production of·O2^- and lead to the formation of V(Zn)for the formation of·OH,contributing to the complete oxidation of NO to nitrate.Besides,the conversion pathway of photocatalytic NO oxidation has been elaborated,This work paves a new way to simultaneously realize the photocatalytic pollutants removal and the inhibition of toxic intermediates generation for efficient and safe air purification.     

The formation of mesoporous TiO2 spheres via a facile chemical process

The mesoporous TiO(2) solid and hollow spheres have been synthesized via a controllable and simple chemical route. Structural characterization indicates that these TiO(2) mesoporous spheres after calcined at 500 degrees C have an obvious mesoporous structure with the diameters of 200-300 nm for solid spheres and 200-500 nm for hollow spheres. The average pore sizes and BET surface areas of the mesoporous TiO(2) solid and hollow spheres are 6.8, 7.0 nm and 162, 90 m(2)/g, respectively. Optical adsorption investigation shows that TiO(2) solid and hollow spheres possess a direct band gap structure with the optical band gap of 3.68 and 3.75 eV, respectively. A possible formation mechanism for TiO(2) solid and hollow spheres is discussed.     

Exciton interactions in CdS nanocrystal aggregates in reverse micelle

Here we report the formation and spectroscopic properties of cadmium sulfide (CdS) nanocrystal systems: individual nanocrystal and CdS aggregates. The optical absorption and luminescence spectra of the aggregated CdS nanocrystals and individual nanocrystal show exciton aggregate and individual exciton characteristics. Although it is not Bose-Einstein condensation, such aggregated quantum dots (QDs) seem to supply us opportunity to study the interactions and condensation of excitons in multi-QDs system, not in the separated QDs system.     

Analysis of Zoledronic Acid and Its Related Substances by Ion-Pair RP-LC

A simple high-performance liquid chromatographic method – ion-pair reversed- phase high performance liquid chromatography (RPIC) has been developed and employed for the analysis of zoledronic acid and its related substances in bulk material and commercial dosage forms. The mobile phase was a mixture of methanol (20%) and 5 mmol L^–1 phosphate buffer (80%) containing 6 mmol L^–1 tetrabutylammonium bromide, adjusted to pH 7.0 with sodium hydroxide. C₈ column was used as the stationary phase. The chromatographic conditions were optimized. The active ingredient – zoledronic acid was successfully separated from its related substances, including remained imidazol-1-yiacetic acid in the synthesis of zoledronic acid and other possible impurities of oxidation and decomposition. The excipients did not interfere with the determination of zoledronic acid in commercial dosage formulations. The method was rapid, simple, accurate and reproducible. It was not only successfully employed for the assay of zoledronic acid in bulk material and pharmaceutical dosage forms but also for the determination of its related substances.     

Highly selective asymmetric acetate aldol reactions of an N-acetyl thiazolidinethione reagent

[reaction: see text] A highly diastereoselective acetate aldol reaction that uses a tert-leucine-derived thiazolidinethione auxiliary and dichlorophenylborane has been developed. The reaction proceeds in excellent yields and with high diastereoselectivities (drs range from 9.5:1 to >100:1).     

High-yield solvothermal formation of magnetic CoPt alloy nanowires

One-dimensional (1D) magnetic nanomaterials have attracted much attention recently because of their applications in magnetic recording and spintronics. Nevertheless, it remains a challenge to prepare free-standing magnetic nanowires in high yield. This Communication reports the successful high-yield synthesis of an interesting 1D ferromagnetic CoPt alloy by direct decomposition of platinum acetylacetonate and cobalt carbonyl compound in ethylenediamine solvent through a solvothermal reaction. The CoPt alloy nanowires obtained have a tunable diameter of 10-50 nm and a length along the longitudinal axis of up to several microns, depending on crystallization temperature and reaction time. A unique formation mechanism involving coarsening and ripening under solvothermal conditions was discovered. This research opens new opportunities in synthesizing nanomaterials through low-temperature solvothermal processes.     

Unusually sharp dependence of water exchange rate versus lanthanide ionic radii for a series of tetraamide complexes

The tetraamide ligand, DOTA-tetra(glycine ethyl ester), forms complexes with the lanthanide(III) cations that exist in solution predominantly as the square antiprism structure with single, slowly exchanging inner-sphere water molecule. Variable-temperature 1H and 17O NMR studies revealed that the bound water lifetimes in these complexes were sharply dependent upon the ionic radius of Ln3+ cation. A novel lanthanide-induced shift technique was used to unmask the bound water 17O resonance of SmL3+ and YL3+ complexes from the bulk water resonance. The bound water lifetime (tauM298) was approximately 800 mus in the EuL3+ complex but became much shorter (several microseconds) for Ln3+ cations with larger and smaller ionic radii. This demonstrates that water exchange is exquisitely fine-tuned in this macrocyclic tetraamide system and that a variety of Ln3+ complexes meet with the exchange requirement, Deltaomega*tauM >/= 1, necessary for an efficient MT agent.     

Analytical methodologies for aluminium speciation in environmental and biological samples--a review

It is recognized that aluminium (Al) is a potential environmental hazard. Acidic deposition has been linked to increased Al concentrations in natural waters. Elevated levels of Al might have serious consequences for biological communities. Of particular interest is the speciation of Al in aquatic environments, because Al toxicity depends on its forms and concentrations. In this paper, advances in analytical methodologies for Al speciation in environmental and biological samples during the past five years are reviewed. Concerns about the specific problems of Al speciation and highlights of some important methods are elucidated in sections devoted to hybrid techniques (HPLC or FPLC coupled with ET-AAS, ICP-AES, or ICP-MS), flow-injection analysis (FIA), nuclear magnetic resonance (27Al NMR), electrochemical analysis, and computer simulation. More than 130 references are cited.     

A Novel pH-Sensitive MRI Contrast Agent

A tetrasubstituted derivative of 1,4,7,10-tetraazacyclododecane with amide coordinating groups and extended noncoordinating phosphonate groups forms a complex with gadolinium(III) (shown in the picture) which contains one slowly exchanging inner-sphere water molecule (tau(M)=21 μs). The 20-MHz water proton relaxivity of the complex was found to be highly pH dependent. Protonation of the noncoordinating phosphonate groups appears to catalyze prototropic exchange of the bound water protons, thereby providing a mechanism for enhanced water contrast below pH 7.     

Sterically demanding diporphyrin ligands and rhodium(II) porphyrin bimetalloradical complexes

A series of sterically demanding diporphyrins H2(por)-X-(por)H2 ligands that contain spacers (X) with different degrees of flexibility were synthesized from the trimesitylporphyrin derivatives 5-(4-hydroxyphenyl)-10,15,20-trimesitylporphyrin (TMP-OH)H2 (1a) and 5-(2,6-dimethyl-4-hydroxyphenyl)-10,15,20-trimesityl-porphyrin, (DMTMP-OH)H2 (1b). The monomeric porphyrins 1a,b, which have steric demands similar to that of tetramesitylporphyrin, (TMP)H2, and carry a hydroxyl functional group at the para position of one of the mesophenyl substituents, were constructed from reaction of pyrrole with two aromatic aldehydes by a mixed aldehyde condensation approach. The diporphyrins with alkyl diether tethers were obtained stepwise from reactions of the hydroxy functionalized porphyrins 1a,b with dibromides Br(CH2)nBr. The diporphyrin which contains a more rigid m-xylylene spacer, was made directly from reaction of 1b with alpha,alpha'-dibromo-m-xylene. Rhodium was inserted into the porphyrins using Rh2(CO)2Cl2 and converted to dimethyl complexes Me-Rh(Por)-X-(Por)Rh-Me. The dirhodium(II) derivatives .Rh(por)-X-(por)Rh.) were generated by photolysis of the dimethyl complexes and observed to occur as stable bimetalloradicals because the ligand steric demands prohibit Rh(II)-Rh(II) bonding. EPR spectra of the dirhodium(II) derivatives, triphenyl phospine adducts, and dioxygen complexes are reported. The kinetic advantage of bimetalloradical complexes for substrate reactions that have two metal-centered radicals in the transition state is demonstrated by reactions of dihydrogen with dirhodium(II) bimetalloradical complexes.