Influence of ultrasonic field on microcystins produced by bloom-forming algae

Under the background of algae removal and growth inhibition by ultrasonic irradiation, the effects of ultrasonic irradiation on removal of Microcystis, the concentration variation of microcystins (MC) produced by Microcystis in Microcystis suspension, and sonochemical degradation of microcystins in water, were studied in the paper. The results showed that ultrasonic irradiation could efficiently inhibit the growth of Microcystis, and ultrasonic irradiation shorter than 5 min would not introduce the increase of microcystins dissolved in Microcystis suspension simultaneity. Also, microcystins dissolved in Microcystis suspension would not increase as ultrasonic power increasing. Further research showed that microcystins were effectively degraded in ultrasonic fields. After 20 min ultrasonic irradiation at 150 kHz and 30 W, the removal rate of microcystins reached 70%.     

Three-component one-pot total syntheses of glyantrypine, fumiquinazoline F, and fiscalin B promoted by microwave irradiation

A microwave-promoted three-component one-pot reaction has been developed to provide access to the core pyrazino[2,1-b]quinazoline-3,6-dione (1) scaffold, which is common to several families of alkaloids with significant biological activities. By adapting this synthetic strategy through the use of selected Boc-amino acids and amino acid esters, we have accomplished highly efficient and concise total syntheses of glyantrypine (2), fumiquinazoline F (3), and fiscalin B (5), achieving overall yields of 55, 39, and 20%, respectively.     

羟基锆及锆铝交联粘土的合成与表征

制备了锆交联粘土和锆铝交联粘土。锆交联粘土制备条件的研究表明，直接用ＺｒＯＣｌ２．８Ｈ２Ｏ水溶液作交联剂，延长老化时间和增大交联剂浓度有利于制备大比表面积高温有序的锆交联粘土。     

Er:Yb:KGW激光晶体生长及缺陷研究

采用顶部籽晶(TSSG)法生长ErYbKGW晶体.通过研究助熔剂的种类、组成与溶质的比例关系对晶体生长的影响,设计了合理的工艺条件转速30～40 r·min-1;拉速1～2 mm·d-1;降温生长速率0.05 ℃·h-1;降温速率15 ℃·h-1;生长周期15～20 d.通过对晶体缺陷的观察分析认为,晶体裂缝及包裹物等缺陷与生长工艺条件密切相关,应尽量减少生长过程中的温度、浓度及生长速度的波动,保持晶体的稳态生长.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

氯化钙/水-醇溶液稀释热

电解质溶液稀释热是溶液的重要热性质之一．由它可计算不同浓度下电解质的溶解热、表现相对摩尔焓、溶液中反应热和化合物生成热等．在电解质溶液理论研究中，稀释热也是重要的基础数据．由稀释热可推算溶液中组分的活度系数、渗透系数、相对偏摩尔焓及表观摩尔热容等[1-3]．在化工生产中，稀释热是化工过程能量计算不可缺少的数据．电解质水溶液稀释热已有不少研究[2，4]．但电解质混合溶剂体系稀释热报导甚少．随着加盐精馏技术、海水淡化技术等研究的进展，急需这方面数据．本文作者已报告了CaCl2／C2H5OH－H2O体系[5]和CaCl2／n－C…     

水溶性高聚物的研究进展

自八十年代初，水溶性高聚物再次成为高分子科学研究热点，评述了水溶性高聚物，特别是疏水缔合型改性水溶性高聚物的最新进展。     

化学计量学定量分析模型的评价及应用

本文介绍了评价化学计量学校正技术所建立的定量分析模型定量分析效果的一种实用方法，根据定量分析模型对样品待测组分的计算值ｘ与样品待测组分的标准值ｙ建立简单回归模型：ｙ＝ａ＋ｂｘ通过检验回归参数ａ＝０，ｂ＝１的假设能否在一定概率水平上被接受，评价定量分析模型对样品待测组分的预测效果。     

铝镓取代的钨硅杂多配合物位置异构体的合成表征及催化性能

合成了通式为Ｋ５－ｎＨｎ［α－，βｉ－ＳｉＷ１１Ｍ（Ｈ２Ｏ）Ｏ３９］·ｘＨ２Ｏ（Ｍ＝Ａｌ，Ｇａ，βｉ＝β１，β２，β３）的八种异构体。通过元素分析、红外光谱和紫外光谱、极谱和循环伏安、２７Ａｌ和１８３Ｗ核磁共振、Ｘ光电子能谱等方法进行了表征。所合成的各异构体在催化以Ｈ２Ｏ２为氧化剂的顺丁烯二酸环氧化反应中，β３异构体具有最高的催化活性     

Synthesis of Novel Benzo-15-Crown-5-Tethered β-Cyclodextrins and Their Enhanced Molecular Binding Abilities by Alkali Metal Cation Coordination

Two novel benzo-15-crown-5 tethered β-cyclodextrins 1 and 2have been synthesized by coupling substituted benzo-15-crown-5 with correspondingβ-cyclodextrin derivatives. Their inclusion complexation behavior withrepresentative guests, such as cyclohexanol, cyclohexane carboxylic acid, cyclohexaneacetic acid, sodium cyclohexane carboxylate, and potassium cyclohexane carboxylate,was investigated in aqueous solution by means of fluorescence spectrometry. As compared with parent β-cyclodextrin, benzo-15-crown-5 tethered β-cyclodextrins 1–2 display significantly enhanced molecular binding abilities and selectivities towards model substrates, especially towards substrates containing alkali-metal cations. These results indicate that, bearing two recognition sites in a single molecule, these supramolecular architectures can strongly enhance the molecular binding ability of parent β-cyclodextrin by the cooperative binding of the β-cyclodextrin cavity and the crown ether moiety. Possessing a shorter linker, crown ether-β-cyclodextrin 2 shows much higher binding affinity with guest molecules than crown ether-β-cyclodextrin 1, which may be attributed to the binding size and molecular multiple recognition behavior between host and guest.