激光冲击强化“残余应力洞”的形成机制

利用ABAQUS有限元软件进行了单个圆形高斯光斑的激光冲击强化数值模拟,分析材料表面光斑中心区域形成的"残余应力洞"现象,并通过分析材料的动态力学响应特征揭示了"残余应力洞"的形成机制。结果表明:在冲击波加载时,光斑边界处会产生很强的剪切应力,形成向四周传播的表面稀疏波和向材料内部传播的剪切波。当稀疏波同时传播到光斑中心,发生相遇、汇聚,使材料产生急剧的上下位移过程,造成冲击波加载塑性变形后的二次塑性变形。二次塑性变形中形成了较大的剪切塑性应变,并降低了冲击波加载阶段产生的轴向和径向塑性应变,使残余压应力降低,从而形成"残余应力洞"。     

Quantile regression for linear models with autoregressive errors using EM algorithm

In this paper, we consider the quantile linear regression models with autoregressive errors. By incorporating the expectation–maximization algorithm into the considered model, the iterative weighted least square estimators for quantile regression parameters and autoregressive parameters are derived. Finally, the proposed procedure is illustrated by simulations and a real data example.     

Effect of oxygen partial pressure on the structure and properties of Cu–Al–O thin films

We have studied the electrical and optical properties of Cu–Al–O films deposited on silicon and quartz substrates by using radio frequency (RF) magnetron sputtering method under varied oxygen partial pressure P_O. The results indicate that P_O plays a critical role in the final phase constitution and microstructure of the films, and thus affects the electrical resistivity and optical transmittance significantly. The electrical resistivity increases with the increase of P_O from 2.4 × 10^?4 mbar to 7.5 × 10^?4 mbar and afterwards it decreases with further increasing P_O up to 1.7 × 10^?3 mbar. The optical transmittance in visible region increases with the increase of P_O and obtains the maximum of 65% when P_O is 1.7 × 10^?3 mbar. The corresponding direct band gap is 3.45 eV.     

离子束辅助沉积对类金刚石膜结构影响的计算机模拟

采用分子动力学(MD)模拟研究了离子束辅助沉积(1BAD)生长类金刚石(DLC)膜的物理过程.分 别选C₂分子和Ar离子作为沉积源和辅助沉积粒子.改变Ar的入射能量和到达比(A r／C)，研 究了它对DLC膜结构的影响.重点讨论了Ar辅助沉积引起表面原子的瞬间活性变化对薄膜结构 产生的影响.分析表明，由于Ar离子的轰击引起的能量和动量的传递，大大地增强了C原子在 表面的反冲动能及迁移概率，增加了合成薄膜的SP³键含量.研究结果和实验 观察一致，并从合成机理上给出了一些定量解释. 关键词： 类金刚石膜 离子束辅助沉积 分子动力学模拟     

Comparison of the solutions from a novel variational method with numerical results for the study of beam propagation in a Kerr medium with nonlinear absorption

We present results from a novel variational method for the study of beam propagation in a Kerr medium with nonlinear absorption. This new method combines the variational method and a nonlinear absorption equation and gives a concise expression for the combination. The results obtained with this method show good quantitative agreement with numerical solutions obtained with the finite-difference method. It is shown that the variational method takes much less time than a numerical simulation with the finite-difference method for analysis of beam propagation in a thick medium with nonlinear absorption and nonlinear refraction. The new method makes detailed analysis of beam propagation in a Kerr medium with nonlinear absorption very simple and fast.     

Post collision interactions and polarization effect in (e, 2e) collisions of helium

A modified distorted-wave Born approximation (DWBA) method is used to calculate the triple differential cross sections (TDCSs) in a coplanar asymmetric geometry for the electron impact single ionization of a He (1s²) atom at intermediate and lower energies. The post-collision interaction and the polarization effect in (e, 2e) collisions of helium are considered in the calculations. The polarization potentials from the damping method and density functional theory (DFT) are compared. Theoretical results are compared with the recent experimental data.     

基于数字锁相的激光光谱早期火灾预警系统

为了实现火灾的快速准确早期预警,研制了一种基于分布式反馈激光器(DFB)的早期火灾预警系统.该系统采用片上系统(SoC)芯片STM32H743为主控制器,结合波长调制(WMS)和数字锁相放大技术(DLIA)实现了CO高灵敏探测.通过单片机内部集成的12位数模转换器和16位模数转换器实现光信号的调制和光电信号采集,并根据内部2倍参考信号进行数字相关运算、积分运算及一阶无限长冲击响应滤波算法实现DLIA算法,从而得到光谱信号的2次解调信号.采用静态配气法进行了系统的标定试验,其线性相关系数达到0.998 8.利用该系统进行榉木,PVC,棉布,聚氨酯泡沫及A4纸的阴燃实验结果表明,阴燃产生CO体积分数达到5×10~(-6)所需时间分别为340、250、250、150、110 s.结果表明此系统具有快速、准确的早期火灾预警功能.     

毛细管电泳法分离联萘酚对映体

利用新的手性选择剂苄基氯化辛可宁，在非水相中成功地分离了联萘酚的对映体，并对分离的机理作了初步地探讨。     

cis‐Di­chloro­(di­methyl­aminomethyl­ene)­(tri­phenyl­phosphine)palladium(II) acetone solvate

The synthesis and X‐ray structural analysis of the title compound, [PdCl₂(C₃H₇N)(C₁₈H₁₅P)]·C₃H₆O, are described. The crystal structure contains discrete monomeric mol­ecules of the carbene complex and solvent mol­ecules separated by normal van der Waals distances. The Pd atom is four‐coordinate in an essentially square‐planar environment, with the chlorine ligands mutually cis; Pd—P = 2.2495 (7), Pd—Cl = 2.3508 (7) and 2.3600 (7), Pd—C 1.948 (2) and N—C(carbene) 1.274 (3) Å.     

Photo-Activated Circularly Polarized Luminescence Film Based on Aggregation-Induced Emission Copper(I) Cluster-Assembled Materials

In this study, a pair of chiral copper(I) cluster-assembled materials (R/S- 2 ) was prepared, exhibiting unique photo-response characteristics with a concentration-wavelength correlation property in DMSO solution. By the combination of R/S- 2 with a polymethyl methacrylate (PMMA) matrix, the first photo-activated circularly polarized luminescence (CPL) film was developed, the CPL signal (g_lum=9×10⁻³) of which could be induced by UV light irradiation. Moreover, the film exhibited a reversible photo-response and extremely good fatigue resistance. Mechanism study revealed that the photo-response properties of the R/S- 2 solution and film are attributed to the aggregation-induced emission (AIE) characteristics of R/S- 2 and a photo-induced deoxygenation process. This study enriches the types of luminescent cluster-assembled molecules and provides a new strategy for the construction of metal cluster-based stimuli-responsive composite materials.