α-Cu_2Se精细结构的球差校正扫描透射电镜表征

目前学界对Cu_2Se低温α相的结构仍未认识清楚,而解决这一问题对理解Cu_2Se在相变过程中热电性能提升等特性具有重要意义。本文首次报道了由球差校正扫描透射电镜(STEM)拍摄到的沿■带轴的原子级分辨率高角环形暗场(HAADF)像,揭示了由Se原子以多种形式有序起伏产生的复杂结构。结合电子衍射图谱,分析了包含不同层数、通过相互组合构成α-Cu_2Se晶体的多种结构变体。使用QSTEM软件对构建的结构变体进行高分辨图像模拟,得到了与实验对应的HAADF像。该工作为更全面地理解α-Cu_2Se的结构提供了新的重要信息。     

Benchmarking the accuracy of coverage-dependent models: adsorption and desorption of benzene on Pt (1 1 1) and Pt3Sn (1 1 1) from first principles

Bimetallic catalysts have demonstrated properties favorable for upgrading biofuel through catalytic hydrodeoxygenation. However, the design and optimization of such bimetallic catalysts requires the ability to construct accurate, predictive models of these systems. To generate a model that predicts the kinetic behavior of benzene adsorbed on Pt (1 1 1) and a Pt₃Sn (1 1 1) surface alloy (Pt₃Sn (1 1 1)), the adsorption of benzene was studied for a wide range of benzene coverages on both surfaces using density functional theory (DFT) calculations. The adsorption energy of benzene was found to correlate linearly with benzene coverage on Pt (1 1 1) and Pt₃Sn (1 1 1); both surfaces exhibited net repulsive lateral interactions. Through an analysis of the d-band properties of the metal surface, it was determined that the coverage dependence is a consequence of the electronic interactions between benzene and the surface. The linear coverage dependence of the adsorption energy allowed us to quantify the influence of the lateral interactions on the heat of adsorption and temperature programmed desorption (TPD) spectra using a mean-field model. A comparison of our simulated TPD to experiment showed that this mean-field model adequately reproduces the desorption behavior of benzene on Pt (1 1 1) and Pt₃Sn (1 1 1). In particular, the TPD correctly exhibits a broadening desorption peak as the initial coverage of benzene increases on Pt (1 1 1) and a low temperature desorption peak on Pt₃Sn (1 1 1). However, due to the sensitivity of the TPD peak temperature to the desorption energy, precise alignment of experimental and theoretical TPD spectra demands an accurate calculation of the adsorption energy. Therefore, an analysis of the effect of the exchange-correlation functional on TPD modeling is presented. Through this work, we show the necessity of incorporating lateral interactions into theoretical models in order to correctly predict experimental behavior.     

Solvent‐Induced Cluster‐to‐Cluster Transformation of Homoleptic Gold(I) Thiolates between Catenane and Ring‐in‐Ring Structures

Supramolecular ensembles adopting ring‐in‐ring structures are less developed compared with catenanes featuring interlocked rings. While catenanes with inter‐ring closed‐shell metallophilic interactions, such as d¹⁰–d¹⁰ Au^I–Au^I interactions, have been well‐documented, the ring‐in‐ring complexes featuring such metallophilic interactions remain underdeveloped. Herein is described an unprecedented ring‐in‐ring structure of a Au^I‐thiolate Au₁₂ cluster formed by recrystallization of a Au^I‐thiolate Au₁₀ [2]catenane from alkane solvents such as hexane, with use of a bulky dibutylfluorene‐2‐thiolate ligand. The ring‐in‐ring Au^I‐thiolate Au₁₂ cluster features inter‐ring Au^I–Au^I interactions and underwent cluster core change to form the thermodynamically more stable Au₁₀ [2]catenane structure upon dissolving in, or recrystallization from, other solvents such as CH₂Cl₂, CHCl₃, and CH₂Cl₂/MeCN. The cluster‐to‐cluster transformation process was monitored by ¹H NMR and ESI‐MS measurements. Density functional theory (DFT) calculations were performed to provide insight into the mechanism of the “ring‐in‐ring? [2]catenane” interconversions.     

Resolving quantum dots and peptide assembly and disassembly using bending capillary electrophoresis

Despite the numerous techniques developed for the studying nanoparticle and peptide interaction nowadays, sensitive and convenient assay in the process of flow, especially to simulate the self‐assembly of quantum dots (QDs) and peptide inflow in blood vessels, still remains big challenges. Here, we report a novel assay for studying the self‐assembly of QDs and peptide, based on CE using a bending capillary. We demonstrate that the semicircles numbers of the bending capillary affect the self‐assembly kinetics of CdSe/ZnS QDs and ATTO‐D₃LVPRGSGP₉G₂H₆ peptide. Moreover, benefitting from this novel assay, the effect of the position on the self‐assembly has also been realized. More importantly, we also demonstrate that this novel assay can be used for studying the stability of the QDs–peptide complex inflow. We believe that our novel assay proposed in this work could be further used as a general strategy for the studying nanoparticle–biomolecule interaction or biomolecule–biomolecule interaction.     

Catalytic Generation of C1 Ammonium Enolates from Halides and CO for Asymmetric Cascade Reactions

A general strategy for the design of asymmetric cascade reactions using readily available halides and carbon monoxide (CO) as substrates is developed. The key is the catalytic generation of C1‐ammonium enolates for the subsequent asymmetric cascade reactions through the combination of palladium‐catalyzed carbonylation and chiral Lewis base catalysis. Utilizing this strategy, we have established asymmetric formal [1+1+4] and [1+1+2] reactions to afford chiral dihydropyridones and β‐lactams with high yields and high enantio‐ and diastereoselectivities.     

Simplicity Beneath Complexity: Counting Molecular Electrons Reveals Transients and Kinetics of Photodissociation Reactions

Time‐resolved pump–probe gas‐phase X‐ray scattering signals, extrapolated to zero momentum transfer, provide a measure of the number of electrons in a system, an effect that arises from the coherent addition of elastic scattering from the electrons. This allows to identify reactive transients and determine the chemical reaction kinetics without the need for extensive scattering simulations or complicated inversion of scattering data. We examine the photodissociation reaction of trimethylamine and identify two reaction paths upon excitation to the 3p state at 200 nm: a fast dissociation path out of the 3p state to the dimethyl amine radical (16.6±1.2 %) and a slower dissociation via internal conversion to the 3s state (83.4±1.2 %). The time constants for the two reactions are 640±130 fs and 74±6 ps, respectively. Additionally, it is found that the transient dimethyl amine radical has a N?C bond length of 1.45±0.02 Å and a C?N?C bond angle of 118°±4°.     

Metal‐Free Oxidative B−N Coupling of nido‐Carborane with N‐Heterocycles

A general method for the oxidative substitution of nido‐carborane (7,8‐C₂B₉H₁₂^?) with N‐heterocycles has been developed by using 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) as an oxidant. This metal‐free B?N coupling strategy, in both inter‐ and intramolecular fashions, gave rise to a wide array of charge‐compensated, boron‐substituted nido‐carboranes in high yields (up to 97 %) with excellent functional‐group tolerance under mild reaction conditions. The reaction mechanism was investigated by density‐functional theory (DFT) calculations. A successive single‐electron transfer (SET), B?H hydrogen‐atom transfer (HAT), and nucleophilic attack pathway is proposed. This method provides a new approach to nitrogen‐containing carboranes with potential applications in medicine and materials.     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.     

Two novel d10 transition metal complexes based on 1H‐benzimidazole‐5,6‐dicarboxylic acid: Synthesis,structure and multifunctional luminescence detection

Two new coordination complexes based on benzimidazole dicarboxylic acid, Zn(Hbidc)?H₂O ( 1 ) and Cd(Hbidc)(H₂O) ( 2 ), have been synthesized under hydrothermal conditions. The complexes were characterized using elemental analysis, infrared and UV–visible spectroscopies, powder X‐ray diffraction, thermogravimetry and single‐crystal X‐ray diffraction. Structural analyses showed that the crystal structures of 1 and 2 are different, due to the various modes of linking of the benzimidazole dicarboxylic acid. Complex 1 has a two‐dimensional network structure and 2 has a three‐dimensional network structure. In addition, we studied the performance of the fluorescence response of two complexes. Results showed that the complexes can be used as chemical sensors for multifunctional testing, such as for UO₂²⁺, xanthine and Fe³⁺ ions. Even if the concentration is very low, they could also be detected, showing that coordination complexes 1 and 2 have very high fluorescence sensitivity. The detection limit for UO₂²⁺ is 5.42 nM ( 1 ) and 0.02 nM ( 2 ), that for xanthine is 1.37 nM ( 1 ) and 0.28 nM ( 2 ), and that for Fe³⁺ ions is 0.76 nM ( 1 ) and 0.62 nM ( 2 ).