聚酰亚胺/二氧化硅纳米尺度复合材料的研究

通过正硅酸乙酯（ＴＥＯＳ）在聚酰胺酸（ＰＡＡ）的Ｎ，Ｎ’ 二甲基乙酰胺（ＤＭＡｃ），溶液中进行溶胶 凝胶反应，制备出不同二氧化硅含量的聚酰亚胺／二氧化硅（ＰＩ／ＳｉＯ２）复合薄膜材料．二氧化硅含量低于１０ｗｔ％的样品是透明浅黄色薄膜；二氧化硅含量高于１０ｗｔ％的样品是不透明棕黄色薄膜．利用红外光谱、扫描电镜、热失重分析、动态力学分析、热膨胀系数测试和应力 应变测试等方法研究了此类材料的结构与性能．结果表明，ＰＩ／ＳｉＯ２纳米复合材料具有较聚酰亚胺更高的热稳定性和更高的模量；线膨胀系数显著降低；拉伸强度和断裂伸长随二氧化硅含量而变化，分别在１０ｗｔ％和３０ｗｔ％附近出现最大值     

烯烃在HZSM-5分子筛上原位芳构化反应的研究

烯烃在ZSM-5分子筛上转化成芳烃的反应是一个非常复杂的反应,既包括聚合裂解反应,又包括氢转移、脱氢环化反应,同时也包括烷基转移和脱烷基等反应,对于这一复杂反应的机理研究较少.Vedrine等人[1]认为烯烃首先在酸性位上通过氢转移生成戊二烯正碳离子,接着环化以及扩环反应生成     

Fibrous crystalline hydrogels formed from polymers possessing a linear poly(ethyleneimine) backbone

Novel thermoreversible physical hydrogels formed from polymers with linear and star architectures possessing a linear poly(ethyleneimine) (PEI) backbone have been investigated. The hydrogelation occurred simply upon natural cooling of hot aqueous solutions of PEIs to room temperature. The X-ray diffraction and differential scanning calorimetry measurements for the resultant hydrogels unambiguously indicated that the hydrogelation originated from the formation of dihydrate crystalline structures of PEI. These crystalline hydrogels are structurally unique and hierarchical. Microscopic images revealed that the morphologies of the crystalline hydrogels depend on their molecular architectures. The linear PEI resulted in branched fibrous bundles organized by unit crystalline nanofibers with a width of ca. 5-7 nm. The six-armed star with benzene ring core produced fanlike fibrous bundles while the four-armed star with porphyrin core assembled into asterlike aggregates. The critical concentration of gelation (C(G)) was low (about 0.2 approximately 0.3%) and the thermoreversible gel-sol transition temperatures (T(G)) were controllable from approximately 43 to approximately 79 degrees C. The hydrogels formed in the presence of the various aqueous additives including organic solvents, hydrophilic polymers, physical cross-linker, chemical cross-linker, and base enabling modification and functionalization during synthesis. The mechanical properties of the hydrogels could be improved by chemical cross-linking of preformed hydrogels by glutaraldehyde. Physically and physical/chemical cross-linked hydrogels served as excellent template roles in biomimetic silicification, which produced silica-PEI hybrid powder or monolith constructed by nanofibers.     

Design and Synthesis of 1-Benzyl-3-(a-hydroxy-(un)substituted benzylidene)pyrrolidine-2,4-diones as Potential Herbicides

The inhibitors of 4-hydroxyphenylpyruvate dioxygenase (HPPD, EC 1.13.11.27) are an new kind of herbicides.[1]Generally, in structure, potent herbicides of this kind must possess: (1) a tricarbonyl methane structure and one of the three carbonyl groups must be a subustituted benzoyl group; (2) the compound must be able to enolise so that the enolate is capable of inhibiting HPPD enzyme by competitive combination with Fe2+, the reaction center of HPPD enzyme.[2]Recently, we noticed that the 3-acyltetramic acids form an expanding group of antibiotics and pigments from micro-organisms,[3] they display a range of biological activities[4] and all of this kind compounds possess all of the characters mentioned above. Tests of their antimicrobial activities indicated that the structure of the acyl substituent at the 3-position was important to many typical antibiotics.[4～6] These characters stimulated us to study this kind of compounds so as to discover new herbicides. In this report, we synthesized a series of compounds 3 and tested their herbicidal activities to investigate their structure-activity relationships.     

A synthetic strategy for the preparation of cyclic peptide mimetics based on SET-promoted photocyclization processes

A novel method for the synthesis of cyclic peptide analogues has been developed. The general approach relies on the use of SET-promoted photocyclization reactions of peptides that contain N-terminal phthalimides as light absorbing electron acceptor moieties and C-terminal alpha-amidosilane or alpha-amidocarboxylate centers. Prototypical substrates are prepared by coupling preformed peptides with the acid chloride of N-phthalimidoglycine. Irradiation of these substrates results in the generation of cyclic peptide analogues in modest to good yields. The chemical efficiencies of these processes are not significantly affected by (1) the lengths of the peptide chains separating the phthalimide and alpha-amidosilane or alpha-amidocarboxylate centers and (2) the nature of the penultimate cation radical alpha-heterolytic fragmentation process (i.e., desilylation vs decarboxylation). An evaluation of the effects of N-alkyl substitution on the amide residues in the peptide chain showed that N-alkyl substitution does not have a major impact on the efficiencies of the photocyclization reactions but that it profoundly increases the stability of the cyclic peptide.     

在“高聚物的结构与性能”课程中讲透高聚物的特点

通过对高分子链的柔性、聚合物独有的熵弹性、显著的粘弹性、特有的描述链段运动的WLF方程,可能实现的大尺寸取向和小尺寸解取向、银纹、单链凝聚态、折叠链片晶和伸直链晶体、分子量的多分散性、高分子溶液特性和高聚物熔体的弹性行为等的讨论,希望能突出“高聚物的结构与性能”课程中高聚物的特点。     

聚酯酰胺的合成及表征

 用两种方法合成了聚酯酰胺（ＰＥＡ）共聚物．一种是两步法，即先合成对苯二甲酸乙醇酰胺（ＢＡＥＴ）单体，然后与对苯二甲酸乙二酯（ＢＨＥＴ）共缩聚；另一种是一步法．即在酯交换反应中直接添加乙醇胺（ＥＡ）．两种方法制得的聚酯酰胺（ＰＥＡ）共聚物测试证明了为产物，并分析了合成中的化学反应．     

THE STRUCTURAL BASIS OF THE POOR FIBRIN SPECIFICITY OF UROKINASE(Ⅰ)——KNOWLEDGE-BASED PREDICTION OF KRINGLE STRUCTURES OF UROKINASE AND ITS RELATED PROTEINS

The Kringle-1 structure of plasminogen (PGK-1), the Kringle-2 structure of tissue plasminogen activator (PAK-2) and the Kringle structure of prourokinase (UKK) has been modeled on the basis of the three-dimensional structure of Kringle-1 of prothrombin (PTK-1) at 2.8 resolution. The predicted three-dimensional structure of these Kringles shows that the binding site of PGK-1 is characterized by an apparent dipolar site, the polar parts of which are separated by a hydrophobic region. PAK-2 possesses the anionic center but has not a cationic binding center which might be provided by a guanidinium group from Arg-69 located adjacent to the Arg-71 position. UKK possesses neither the anionic binding center nor the cationic center which are probably the main reason for the poor fibrin specificity of urokinase.     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

高聚物球晶偏光织态研究中的厚度性消光与补偿机理

以两维聚环氧乙烷（ＰＥＯ）球晶为对象，探讨了偏光显微法的消光机理，尤其是其中的厚度性消光机理，并对于补偿片的作用原理作了细致的理论分析，运用上述手段对ＰＥＯ球晶的形态进行了研究。