D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

Ni2（OEt）2／SiO2催化二氧化碳与丙烯直接合成甲基丙烯酸的研究

 采用表面改性法制备了负载型Ni2（OEt）2／SiO2双核金属乙氧基配合物催化剂，利用示差量热、红外光谱和微反技术对催化剂的表面结构、热稳定性、化学吸附性质和催化活性进行了研究．结果表明，负载型双核金属乙氧基配合物Ni2（OEt）2／SiO2中的Ni2＋与载体SiO2表面的O2－以双齿配位形式键合；二氧化碳在催化剂表面存在桥式吸附态和碳酸单乙酯基物种两种吸附态，丙烯则只有一种分子吸附态；在适宜的反应条件下，二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂上的反应产物主要是甲基丙烯酸．根据实验结果，提出了二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂表面的反应机理，反应物分子共吸附于催化剂表面同一活性单元上，羧酸根和丙烯解离吸附态的形成是反应顺利进行的关键步骤．     

VO(PMBP)2·nL型加合物的合成和性质研究

本文合成了四个VO(PMBP)₂·nL型加合物,元素分析确定其组成为VO(PMBP)₂·2H₂O、VO(PMBP)₂·py、VO(PMBP)₂·β-MP·H₂O、VO(PMBP)₂·γ-MP,其中PMBP、py、β-MP、γ-MP分别为1-苯基-3-甲基-4-苯甲酰吡唑酮-5,吡啶,3-甲基吡啶、4-甲基吡啶.通过摩尔电导、差热热重分析、红外光谱、电子光谱、顺磁共振波谱等方法研究了加合物的性质.     

燃烧催化剂中LaAlO3作为第2载体的研究

在载体堇青石表面涂覆一层LaAlO3作为第二载体，用浸渍法制备负载型LaMnO3、LaCoO3等钙钛矿型燃烧催化剂时，发现能促进LaMnO3等活性相的生长，从而提高了二甲苯完全氧化的催化活性；对于负载型LaCo3O3催化剂，可避免因用γ－Al2O35作第二载体而生成的低活性CoAl2O4类尖晶石相，因而有利于提高催化剂的耐热性。     

Optimized Separation of Nine Xanthones by Microemulsion Electrokinetic Chromatography

A microemulsion electrokinetic chromatography method has been firstly used for the separation of the therapeutically important xanthones from Securidaca inappendiculata. The separation of the nine xanthones was systematically optimized with respect to pH, composition of microemulsion,addition of cyclodextrins, applied voltage and column temperature. Baseline separation was successfully achieved for the nine xanthones, which was also compared with that by micellar electrokinetic chromtography.     

A Novel Octahedral Hexasilver(I) Cluster: Ag_6[SSCN(n-C_4H_9)_2]_6

ＣｏｍｐｏｕｎｄｓｆｏｒｍｅｄｆｒｏｍＣｕ ,ＡｇａｎｄＡｕｗｉｔｈｄｉｔｈｉｏ ｌａｔｅｌｉｇａｎｄｓ ,ｓｕｃｈａｓｔｈｅｄｉａｌｋｙｌｄｉｔｈｉｏｃａｒｂａｍａｔｅ (ＤＴＣ) ,ｍｅｒｃａｐｔｏｔｈｉａｚｏｌｉｎｅ (ＨＭＴ)ａｎｄｄｉａｌｋｙｌｄｉｔｈｉｏｐｈｏｓｐｈａｔｅｓ(ＤＤＰ) ,ｈａｖｅｐｌａｙｅｄａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｅｃｈｎｏｌｏｇｙ .1Ｃｕ(Ｉ) Ｓｃｌｕｓｔｅｒｓａｌｓｏｈａｖｅｂｅｅｎｉｍｐｌｉｃａｔｅｄｉｎｂｉｏｌｏｇｙａｓａｎ ｔｉ ｏｘｉｄａｎｔｓ .2Ｔｈｅｃｕｂａｎ…     

新的聚合物支载硼氢负离子还原剂系统研究 3: 聚合物支载还原剂III

硼氢化钠的低分子还原系统研究很多,但其聚合物支载还原剂相对来说就很少,而且仅以强碱型阴离子交换树脂来制备的聚合物试剂。为了寻找用途更广泛的、新的聚合物支载还原剂,我们进行了硼氢负离子的聚合物还原系统的研究;发现能用弱酸型阳离子交换树脂制备出新的聚合物支载还原剂。前文报道了用NaBH_4的水溶液和阴离子交换树脂     

Nonlinear Optical Properties of Tri—nuclear Transition Metal Clusters M—（μ—S）s—M′（M=Mo,W;M′=Cu,Ag,Au）

The static polarizabilities and the second-order hyperpolarizabilities of a series of tri-nuclear metal cluster models MS4(M′PPh3)2(M′PPh3)(M=Mo,W;M′=Cu,Ag,Au)have been calculated within the first-principle theoretical framework. The model clusters have two fragments of rhombic units and it is the charge ransfer from one of these moieties to the other that is responsible for nonlinear optical property. This kind of electronic delocaization, differentiated from that of planar π-system, is very interesting and is worthy for further investigation.     

Removal of strontium ions by a crosslinked copolymer containing methacrylic acid functional groups</p> </p>

Summary A tail-made polymer matrix is proposed to remove strontium ions from aqueous solutions. The removal behavior of strontium ions on a crosslinked copolymer containing methacrylic acid as functional groups was investigated as a function of sorptive concentration, time, temperature and pH. It was observed that an increase of these parameters enhanced the removal of Sr(II) ions from aqueous solution. It is found that a maximum adsorption of Sr(II) ions can be obtained on the crosslinked copolymer after 30 minutes and at pH 8. The increase of Sr(II) ion concentration in the solution resulted in an increase in the amount of Sr(II) ions adsorbed on the crosslinked copolymer containing methacrylic acid as functional groups. However, after a maximum of Sr(II) concentration in the solution, the percentage of adsorbed Sr(II) ions decreased. The adsorption data are well represented by the Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherms. The adsorption capacity of the copolymer and the free energy change were calculated by using the D-R isotherm. For the adsorption of Sr(II) ions on the crosslinked copolymer the thermodynamic parameters (DH°,DS° andDG°) were calculated.</p> </p>     

1,2-丁二醇共聚对聚对苯二甲酸乙二醇酯结晶行为及力学性能的影响

为了探索生物基乙二醇中的1,2-丁二醇(1,2-BDO)作为共聚单体对生物基聚对苯二甲酸乙二醇酯(PET)的结晶行为和力学性能的影响。 本文合成了生物基PET均聚物和不同1,2-BDO共聚单元摩尔分数的系列生物基PET共聚物(共聚单体摩尔分数分别为2.0%、2.7%和5.6%),并采用傅里叶变换红外光谱仪(FTIR)、差示扫描量热仪(DSC)和力学测试等技术手段研究了其结晶行为和力学性能。 结果表明,随着1,2-BDO共聚单元摩尔分数的增加,PET共聚物的熔融温度、结晶速率及结晶度均明显降低,表明1,2-BDO共聚单体的引入破坏了PET分子链的规整性,阻碍了PET链段的结晶。 PET材料的拉伸强度随着1,2-BDO共聚单元摩尔分数的增加而降低,而弯曲强度和弯曲模量略有升高。