Synthesis, structure and fluorescence of a novel diarylethene

The photochromic diarylethene, 1,2-bis(2-methyl-5-(2-(1,3-dithiolpentane))-thien-3-yl)perfluorocyclopentene (BMDTP), has been synthesized in high yield and its structure was determined by X-ray crystallographic analysis. The compound undergoes a photochromic reaction both in solution and in the single crystalline phase. In addition, its fluorescence property in solution is discussed.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

Determination of Ultratrace Amounts of Copper(Ⅱ) in Water Samples by Electrothermal Atomic Absorption Spectrometry After Cloud Point Extraction

A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry (ETAAS) after cloud point extraction (CPE). 1-( 2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0. 1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 0-2.0ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.     

Simultaneous Reduction of Nitro Group and S-S Bond in Nitrodisulfides by Samarium Diiodide: A New Approach to Benzothiazolines

Asapowerfulandversatileone-electrontransferreductant,Sml,hasbeenappliedwidelyinorganicsynthesis'.OurpreviousworksonthereductionofnitrocompoundsandreductivecleavageofS-S,Se-Se,Te-TebondswithSml,'ledustoinvestigatethesimultaneousreductionofnitrogroupandS-SbondbySml,.Benzothiazolinesderivativesareimportantreagentsandusefulintermediatesinorganicsynthesisandpharmaceuticalchemistry.Forinstance,theycanbeusedasadditionagentsforphotographicemulsions",effectiveacaricides",antituberculousagents",lubr…     

氯化聚乙烯弹性体的固相法合成

讨论了以固相法合成氯化聚乙烯（ＣＰＥ）弹性体的过程．实验结果表明，以固相氯化反应所得的ＣＰＥ，其大分子链上Ｃｌ取代基的分布比水相悬浮法更均匀．氯化过程的温度直接影响氯化速度及分子结构，如残留结晶、氯分布等．而聚乙烯颗粒表面与内部的氯化程度取决于氯化速度．大分子链上Ｃｌ取代基对邻近基团的氯化起阻碍作用     

OUH体系的结构和分析势能函数

采用密度泛涵B3LYP方法优化出了OUH分子的各种结构，确定了最稳定构型和离解能，以及它们的谐性力常数，并导出双原子分子UH,UO的Murrell-Sorbie势能函数及其光谱数据。采用多体项展式方法，导出OUH(X^4A')基态分子的分析势能函数，获得OUH(X^4A')体系的势能面，考察了这个势能函数的基本性质，正确地复现出OUH分子的平衡结构特征，结果表明：U+OH,O+UH,H+UO的反应均为无阈能的放热能反应。为进一步探讨OUH体系的反应动力学过程打下了基础。     

Surface phase behavior and microstructure of lipid/PEG-emulsifier monolayer-coated microbubbles

Langmuir trough methods and fluorescence microscopy were combined to investigate the phase behavior and microstructure of monolayer shells coating micron-scale bubbles (microbubbles) typically used in biomedical applications. The monolayer shell consisted of a homologous series of saturated acyl chain phospholipids and an emulsifier containing a single hydrophobic stearate chain and polyethylene glycol (PEG) head group. PEG-emulsifier was fully miscible with expanded phase lipids and phase separated from condensed phase lipids. Phase coexistence was observed in the form of dark condensed phase lipid domains surrounded by a sea of bright, emulsifier-rich expanded phase. A rich assortment of condensed phase area fractions and domain morphologies, including networks and other novel structures, were observed in each batch of microbubbles. Network domains were reproduced in Langmuir monolayers under conditions of heating–cooling followed by compression–expansion, as well as in microbubble shells that underwent surface flow with slight compression. Domain size decreased with increased cooling rate through the phase transition temperature, and domain branching increased with lipid acyl chain length at high cooling rates. Squeeze-out of the emulsifier at a surface pressure near 35 mN/m was indicated by a plateau in Langmuir isotherms and directly visualized with fluorescence microscopy, although collapse of the solid lipid domains occurred at much higher surface pressures. Compression of the monolayer past the PEG-emulsifier squeeze-out surface pressure resulted in a dark shell composed entirely of lipid. Under certain conditions, the PEG-emulsifier was reincorporated upon subsequent expansion. Factors that affect shell formation and evolution, as well as implications for the rational design of microbubbles in medical applications, are discussed.     

Influence of organic bases on constructing 3D photoluminescent open metal-organic polymeric frameworks

Four three-dimensional non-interpenetrating open coordination frameworks constructed from the CTC ligand (CTC =cis,cis-1,3,5-cyclohexanetricarboxylate) coordinated to metal ions (Mn(II) and Cd(II)): Mn(3)(CTC)(2)(DMF)(2)(1); Cd(3)(CTC)(2)(H(2)O)(3).H(2)O (2); Cd(3)(CTC)(2)(4,4'-bpy)(2)(EG)(2)(3); Cd(3)(CTC)(2)(mu(2)-hmt)(DMF)(C(2)H(5)OH)(H(2)O).2H(2)O (4)(DMF = dimethylformamide and EG = ethylene glycol) have been synthesized by slow evaporation of DMF-C(2)H(5)OH-H(2)O solutions of M(II)(Mn(II) or Cd(II)) and CTC in the presence of the organic bases TEA (triethylamine), TEA, 4,4'-bpy (4,4'-bipyridine) and hmt (hexamethylenetetramine), respectively, and structurally characterized by X-ray crystallography. The polymer constructed by CTC and Mn(II) exhibits a 3-D architecture with 5 x 9 A channels; the polymer formed by CTC and Cd(II) exists a 3-D extended framework with 9 x 9 A channels; wave-like sheet subunits of the polymer are upheld by 4,4'-bpy ligands resulting in a 3-D framework with 4 x 10 A channels; two-fold alternate sheet subunits of the polymer are interlinked by mu(2)-hmt ligands to form a novel 3-D architecture with 7 x 8 A channels. Polymers exhibit their strongest excitation peaks at 391, 390 and 394 nm, respectively, and their main strong emission peaks are at 543, 460 (with a shoulder peak at about 570 nm) and 557 nm, respectively.     

The Lycopodium alkaloids

Lycopodium alkaloids are quinolizine, or pyridine and alpha-pyridone type alkaloids. Some Lycopodium alkaloids are potent inhibitors of acetylcholinesterase (AChE). Huperzine A (HupA) is reported to increase efficiency for learning and memory in animals, and it shows promise in the treatment of Alzheimer's disease (AD). 201 Lycopodium alkaloids from 54 species of Lycopodium (sensu lato) have been reported so far. This review is intended to to cover the chemical, pharmacological and clinical research on Lycopodium alkaloids reported in the literature from the spring of 1993 to August 2004. Structures of 81 new Lycopodium alkaloids are presented, classified and analyzed. The structural characters and biogenetic relationships of the four major Lycopodium alkaloid groups (lycopodine, lycodine, fawcettimine and miscellaneous) are discussed. Bioactivities of Lycopodium alkaloids, especially HupA, are summarized. In particular, the effect of HupA and other cholinesterase inhibitors (anti-AD drugs) on acetylcholine esterase (AChE) activity in the rat cortex and butylcholine esterase activity are compared. Structure-activity relationships and structure modifications of HupA and its analogs are described. Information on clinical trials with HupA and its derivative ZT-1 is presented. The state of HupA availability and recent advances in in vitro propagation of HupA producing plants are outlined. Finally, hypotheses about Lycopodium alkaloid biosynthetic pathways are discussed.